Center lathe

STANKO 16K40

Condition: new, Year of construction: 2026, functionality: fully functional, Blast freezing containers are designed to rapidly freeze your fresh products at temperatures down to -36/-45 °C. By freezing fresh goods immediately after production, long shelf life and safe consumption are ensured. SIZE: 10,000 x 2,940 x 3,100 mm CABIN: 7,000 x 2,600 x 2,200 mm CAPACITY: 6,500–8,000 KG/24H MOTOR: 65 HP DORIN Nsdoydlv Djpfx Adcsdc DEFROST: 36 KW RESISTANCE EVAPORATOR: 4 x 630 mm BLAST FAN COMPLETE STAINLESS-STEEL PANEL, 200 mm

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Nsdpfx Aewd D Itjdcjdc

Condition: ready for operation (used), Year of construction: 2020, cooling capacity: 1 kW (1.36 HP), This is an used chiller with a nominal cooling capacity ~1000kW at water +12/7°C. Bitzer screw compressors, R513A refrigerant. The unit is equiped with built-in pump and factory expansion vessel. Unit in good condition from our rental machine park. Transport not included.We provide 3 month guarantee (aplies terytory of Poland). Nedpfjq Rvwnsx Adcodc

Condition: used, Refrigerant compressors system Bitzer -Type: 6G-40.2Y-40P (x5) -Volume: 126.8 m3/h (x5) Nodpfxsz A R E Ro Adcsdc -Cooling capacity for R404A: 513 kW at 0°C/40°C, 427 kW at -5°C/40°C, 351.5 kW at -10°C/40°C, 181.5 kW at -25°C/40°C -Dimensions: 3100 x 840 x 1950 mm -Tank dimensions: 1400 x 930 x 2780 mm -Items in magazine: 1 -Reference number: Z136 -Condition: Used, ready to work

Condition: used, Refrigerant compressors system Bitzer -Type: 6F-40.2Y-40P (x4), 6FE-44Y-40P (x1) -Volume: 151.6 m3/h (x4), 152 m3/h (x1) -Cooling capacity for R404A: 505.7 kW at -5°C/40°C, 419.5 kW at -10°C/40°C, 217.14 kW at -25°C/40°C -Dimensions: 4400 x 1050 x 1250 mm -Items in magazine: 2 -Reference number: Z141 Nsdpfx Adez I Ihmscedc -Condition: Used in very good and working condition, ready to work

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201 509 103 051, Nitrogen-based freezer tunnel with a conveyor belt size of 13500/1200 mm. It has been decommissioned. Currently disassembled. Nodozdnxmepfx Adcodc Also for sale is a PAKO nitrogen tunnel with a conveyor belt size of 10500/1200 mm.

Condition: used, Refrigerant compressors system Bitzer Nedsz I Ihajpfx Adcodc -Type: 6F-40.2Y-40P (x5) -Volume: 151.6 m3/h (x5) -Cooling capacity for R404A: 500 kW at -5°C/40°C, 415 kW at -10°C/40°C, 213.5 kW at -25°C/40°C -Dimensions: 4400 x 1050 x 1250 mm -Items in magazine: 1 -Reference number: Z140 -Condition: Used in very good and working condition, ready to work

Condition: used, Year of construction: 2023, Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania Ndedoz Sp Anopfx Adcsc

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 1,400 h, power: 113 kW (153.64 HP), input voltage: 400 V, input current: 160 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, inner dimension length: 8,040 mm, inner dimension width: 1,020 mm, inner dimension height: 120 mm, total length: 8,890 mm, total width: 2,005 mm, total height: 2,065 mm, number of chambers: 1, number of shelf rows: 3, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, For sale is a used tunnel oven from 2019. This oven runs on electricity. Manufacturer: Southstar, China. Total length (external) including entry section: approx. 8,890 mm Entry length: 850 mm Ndjdsyvqt Hspfx Adcjc The exit is flush with the oven body. External width: approx. 2,005 mm External height: approx. 1,300 mm Distance between the heating plates and heating elements: approx. 120 mm Entry height between heating plates: approx. 135 mm Height from the floor to the top edge of the control panel: approx. 2,065 mm Length of heating plates: approx. 1,015 mm Width of individual heating plates: approx. 96 mm Length of heating plates between the M10 screw heads: 965 mm The motor and gearbox are mounted on top to avoid heat exposure. Unused spare parts, including a motor, gearbox, as well as heating plates and heating elements, are included. This oven was in use for only about 9 months. It consists of 3 zones; top and bottom heat can be controlled separately in each zone. Previously used for pizza production but is suitable for other products as well. The oven served as a backup unit, so this is not a distress sale, but price negotiations are possible. Viewing and test runs can be arranged on site in 32052 Herford. Collection only from Herford. No guarantee or warranty.