Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg Pjdpfx Amezw H Hislsgu The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: used, Year of construction: 2015, power: 90 kW (122.37 HP), nominal power: 90 kW (122.37 HP), rotational speed (min.): 1,480 rpm, rotational speed (max.): 1,480 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 156 A, type of input current: three-phase, overall weight: 692 kg, total length: 1,035 mm, total width: 557 mm, total height: 695 mm, torque: 580 Nm, type of cooling: air, protection type (IP code): IP55, No. 10040 Three-phase motor Simotop / Techtop T3CR 280M-4 / 90 kW / 1480 rpm Unused, year of construction 2015, in new condition Three-phase asynchronous motor Output 90 kW at 50 Hz 4-pole, speed 1480 rpm Voltage Δ/Y 380/660 V or 420/720 V at 50 Hz Rated current 156.1/89.9 A or 141.3/82.4 A Power factor cos φ 0.92 Rated torque approx. 580 Nm Can be operated in delta on a 400 V supply, therefore suitable for star-delta starting Also suitable for 60 Hz 90 kW at 400/690 V and 1770 rpm 108 kW at 480/830 V and 1780 rpm Efficiency class IE3, efficiency 95.2% Protection class IP55 Insulation class F Duty type S1 continuous operation Cooling method IC411, totally enclosed fan-cooled (TEFC) PTC thermistors for winding protection IEC standard motor, frame size 280M, shaft height 280 mm Mounting type IM B3, foot-mounted with bolted-on feet Foot hole spacing 457 x 419 mm, 4 holes Ø 24 mm Shaft end Ø 75 x 140 mm with 20 mm key Grey cast iron housing, colour RAL 7024 graphite grey Ball bearings SKF 6316 ZZ C3 on both ends Terminal box on top, cable entries 2x M50x1.5 and 1x M16x1.5 Pgedj Afbxgjpfx Amlju Motor dimensions approx. 1035 x 557 x 695 mm LWH Transport dimensions approx. 1200 x 800 x 900 mm LWH Weight approx. 692 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: ready for operation (used), operating hours: 418 h, functionality: fully functional, power: 280 kW (380.69 HP), fuel type: diesel, type of cooling: air, Very well-maintained engine, very few hours of use. Pedpfx Amez Sxgielsgu

Condition: used, power: 7.5 kW (10.20 HP), rotational speed (min.): 720 rpm, rotational speed (max.): 1,460 rpm, input voltage: 380 V, input frequency: 50 Hz, input current: 16 A, type of input current: AC, SEW adjustable geared motor 4.4 / 7.5 kW 720 / 1460 rpm functionally tested Pjde Afzk Nepfx Amljgu

Condition: like new (used), Year of construction: 2024, operating hours: 24 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,970 cm³, rotational speed (min.): 1,500 rpm, type of cooling: water, CHP POWER PLANT fueled by SYNGAS (Woodgas) with electrical capacity 140 kWel and thermal capacity 280kWth Pgsdpfx Aoz Iyq Tomleu

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). Psdpjzuuimsfx Amlegu The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: used, Year of construction: 2015, functionality: fully functional, torque: 6,490 Nm, input frequency: 50 Hz, rotational speed (max.): 2,920 rpm, rotational speed (min.): 1,460 rpm, SEW Eurodrive gearbox motor, as shown in the picture, for sale in good used condition. Type R137, rpm 1460/20 - 2920/40 3610 Nm - 6490 Nm Podsz Tdbuopfx Amljgu kW 13.5/15/Si Brake 230V AC 200Nm

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 4016, fuel type: diesel, number of cylinders: 16, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,800 rpm, overall weight: 700 kg, total length: 2,200 mm, total width: 500 mm, total height: 800 mm, type of cooling: water, Engine block with crankshaft bearings supports. Bought by mistake for a genset overhaul - never used, stored in a box, inside a dry werehouse. Good as new. Pgsdpfou Rmt Djx Amlou Fits any 4000 series Perking 16 cylinders genset engine.

Condition: refurbished (used), Year of construction: 2016, operating hours: 17,000 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,930 cm³, type of cooling: water, MAN D2842 longblock, relevant to LE201, LE203, LE211, LE213 versions Completely overhauled. Oil relief valve - new Oil pump - new Oil cooler - new Heads assembly - new Camshaft - new Pistons - new Piston rings - new Pjdjz Ef Rmspfx Amlogu Liners - new Painted Compression and oil pressure tested. Video evidences available under separate request

Condition: excellent (used), CATALOGUE NUMBER: 7099 TECHNICAL DATA - Engine power: 132 kW - Shaft diameter: 65 mm - Shipping dimensions (length/width/height): 120x80x700 mm - Engine dimensions (length/width/height): 550x1050x700 mm Podpezx Scrofx Amlogu - Weight: 630 kg ADVANTAGES – Used engine – Very good condition Net price: 10,900 PLN Net price: 2,535 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, functionality: unexamined, The motors removed from the Kawasaki robot – according to our mechanics, “everything looks good” – were not connected or tested. 3x Senyo Denki: P60B13150HCX23 – Power: 2.1 kW Speed: 3000 rpm 3x Senyo Denki: P80B22450RCX2A – Psdpfx Ao Adp E Eomlsgu Power: 4.2 kW Speed: 2400 rpm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Podpfx Aozuukqjmlogu Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, Pgjdpfxsptlble Amlju crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Condition: used, operating hours: 6,900 h, power: 114.74 kW (156.00 HP), fuel type: diesel, number of cylinders: 4, rotational speed (min.): 2,000 rpm, type of cooling: water, Deutz TCD 2013 L04 2V. 4-cylinder turbo engine. 156 hp. Removed from an aircraft tug in running condition, with 6900 operating hours. Video, photos and information also available via WhatsApp! Price net + 21% VAT or net for export with VAT number. We speak Dutch. We speak German. We speak English. Pgodpfoz Rq Rdox Amlsu Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: like new (used), functionality: fully functional, A total of 75 motors Brand - Type - Quantity Psdpfxoyz Idme Amlegu Leroy Somer - LS63 - 1 Leroy Somer - LS71 - 1 FIR - 6AH3 - 5 Sabiana / FIR - 6AH12 - 1 Sabiana / FIR - 46SKAH5 - 1 Antriebstechnik G Bauknecht - 7543054/103 - 2 VEM motors - K21R71KZH - 1 Leroy Somer - LS112MT - 10 ABB - MT80A19F165-4 - 3 Dynamotor De Coster - ONV-T3 (2) - 3 Dynamotor De Coster - ONV-T6 (2) - 2 Dynamotor De Coster - ON-VT3 (2) - 1 Antriebstechnik G Bauknecht - RF0.25/2-7 - 1 Antriebstechnik G Bauknecht - RFO.25/2-7 - 1 Stork - 4AP90L-2 - 1 - N°004488-2000 - 2 Hanning Elektro-Werke - L7AF6B-143 - 1 Leroy Somer - LS132MW6 - 1 Leroy Somer - N°023871JG011 - 1 Efacec - BF5 112 M44 - 1 ABB - 3GAA131002-ASA - 1 ABB - MT100LBZ8-4/8 - 1 Afacec - BF5 112M44 - 1 - A9INCR0106AH3 - 1 RBL - RBLS17SE - 1 - OFR4745E - 7 AACO - 60.2.130M - 2 RBL - RBL6035E - 3 RBL - RBL4755E - 1 Dynamotor De Coster - OLPBC311 - 1 - RJB365 - 1 ABB - M2VA718-4 - 1 WEG - C56 - 1 VEM motors - K21R80K2 - 1 WEG - GF08143 - 1 Simel - 19/100 - 1 Leroy Somer - LS80LT - 1 AACO - 135.2.750.54T - 1 ATB - 112M/2A-11 - 3 - N°074751CL002 - 1 RBL - RBL 172 T - 1 ABB - 3GAA102001-ADA - 1 Simel - 10/3002 - 1 Simel - 10/3003 - 1

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pjdjf Dlzuspfx Amlogu Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: refurbished (used), functionality: fully functional, power: 248 kW (337.19 HP), rotational speed (min.): 2,184 rpm, rotational speed (max.): 3,400 rpm, input voltage: 620 V, input current: 432 A, type of input current: DC, protection type (IP code): IP23, ABB DC Motor Type: DMI225K Construction: IM1001-B3 Standard: IC 17 Operating class: S1 Pgjdpfsxhfhajx Amleu Input voltage: 620 V Input current: 432 A Field input voltage: 220 V Field input current: 11 A Rated power: 248 kW RPM: 2184 / 3400

Condition: refurbished (used), functionality: fully functional, power: 349 kW (474.51 HP), rotational speed (min.): 1,403 rpm, input voltage: 520 V, input current: 713 A, type of input current: DC, protection type (IP code): IP23, BBC DC motor Type: GNB280L35F Construction: IM1001-B3 Standard: IC 17 Duty cycle: S1 Input voltage: 520 V Input current: 713 A Field voltage (Ufield): 220 V Field current (Ifield): 23.5 A Rated power Pn: 349 kW Psdexhc Rlopfx Amlsgu RPM: 1403

Condition: refurbished (used), functionality: fully functional, power: 148 kW (201.22 HP), rotational speed (min.): 1,350 rpm, input voltage: 520 V, input current: 307 A, type of input current: DC, protection type (IP code): IP23, BBC DC motor Type: GN225L37F Design: IM1001-B3 Standard: IC06 Psdpfx Amjxhdmbelegu Duty class: S1 Input voltage: 520 V Input current: 307 A Field voltage (Ufield): 220 V Field current (Ifield): 10.7 A Power Pn kW: 148.4 kW RPM: 1350

Condition: new, Year of construction: 2019, functionality: fully functional, power: 250 kW (339.91 HP), rotational speed (min.): 992 rpm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,759 kg, SIEMENS squirrel-cage induction motor: Podjzm U N Dopfx Amlegu 1LE5603-3AC83-3GR3-Z_250kW, B02+B60+B61+H00+L51+Q01+Q02+Q72+R16+D47 6x PT100 sensors in the winding, PT100 sensor in each bearing, Anti-condensation heating 230 V/50 Hz, SPM nipples for vibration measurement, Insulated bearing on the non-drive end (NDE), Protective coating for C3 environment, EAC certificate. 250kW, inverter supply 380V (from a 400V grid), 50 Hz, 992 rpm, IMV1 with canopy, flange mounting with downward-facing shaft, IP 55, powered by a low-voltage converter, 490 A, 2407 Nm, self-ventilated IC 411, ambient temperature from -20 °C to +40 °C, altitude up to 1000 m above sea level, weight approx. 1,759 kg.

Condition: used, functionality: fully functional, machine/vehicle number: 71302488218, power: 45 kW (61.18 HP), rotational speed (min.): 1,475 rpm, rotational speed (max.): 1,770 rpm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 330 kg, protection type (IP code): IP55, EMK electric motor, model KQMTG225M-4B3E2K, axle height 225 mm. Pgedpfxsz Akrge Amlsu

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Pjdpfj Aarfgsx Amlegu Design V1 Frame size 200L Motor speed 2955 rpm Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Shaft projection length 110 mm Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Net weight 250 kg Excellent condition – new, unused from stock clearance

Condition: refurbished (used), functionality: fully functional, power: 107 kW (145.48 HP), rotational speed (min.): 1,578 rpm, input voltage: 520 V, input current: 224 A, type of input current: DC, protection type (IP code): IP23, ABB DC motor Pedpsxhdaujfx Amlsgu Type: DMG200S Construction: IM1001-B3 Standard: IEC 34-1 Input voltage: 520 V Input current: 224 A Field voltage (Ufield): 220 V Field current (Ifield): 8.8 A Rated power (Pn): 107 kW Speed: 1578 rpm

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1565811, overall weight: 300 kg, total length: 1,200 mm, total width: 800 mm, total height: 650 mm, Used Stöber geared motor with Rexroth servo drive. Stöber gearbox. Type K813VNG0320MO40 Performance: Gearbox: n1-2500/min. n2-21/min. Motor power: n.max.4500 min-1 Type: MKD112C-058-KG3-BN Data see type plate / pictures. Quantity: 1 Euro pallet with 1 gearbox. Packaging and loading included. Pgjdotp Tbzopfx Amleu

Condition: not inspected (used), 6-cylinder diesel engine, manufacturer: Deutz, type: BF6L513R, model no.: 7963826, power output: 137 kW. Pedpfx Amez R Nqwolsgu