Vertical Turret Lathe - Single Column

SCHIESS- FRORIEP

Condition: not inspected (used), Faceplate: 2500 mm Swinging diameter: 3200 mm Max. turning height under tool: 2500 mm Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Cross slide: 2000 mm Ram travel, vertical: 1600 mm Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Milling drive motor: 18 kW Hedpfezdk A Uex Adrenn Milling drive speed: 1600 rpm Milling drive torque: 710 Nm

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE 1 x set off 4 jaws 410 x 330 x 200 mm MACH-ID 6692 Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 Hsdpezc Iavofx Adronn set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump 125 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE 1 x set off 4 jaws 410 x 330 x 200 mm Hnsdpfx Adjzc H Uxsrjn MACH-ID 6693 Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump length ways 125 mm Hole to hole jump in width 250 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, Control system: Siemens 840-C Hedpfx Aezadagodrsnn Faceplate diameter: 1800 mm Swinging diameter: 2000 mm Maximum turning height: 1100 mm (below tool) Table speed: 130 RPM Workpiece weight: 8000 kg Tool changer: 12 positions

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. Hnjdpfjyfurqsx Adren - Table diameter: 1,250 mm - Swing diameter: 1,500 mm - Turning height: 1,250 mm - Siemens control system type 840 Dsl - Tool holder Inspection is possible at any time by prior appointment.

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: 4218/ 12035, Axis height over bed: 1500 mm Speed: 0 - 315 rpm Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 6000 mm D 66 – 85 mm L = 8000 mm Hnedjwqk Umopfx Adrsn D 86 – 105 mm L = 12,000 mm D 106 – 125 mm L = 16,000 mm D 126 – 200 mm L = 24,500 mm D 201 – 250 mm L = 24,500 mm D 251 – 555 mm L = 18,000 mm

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: 4159, Maximum machining diameters: 4000 mm / 3500 mm (clamping plate) Clamping plate speed: max. 80 rpm Maximum workpiece height: 2000 mm Main drive power: 55 Kw Note grinding equipment Maximum workpiece weight: 40t Regular service and maintenance Hsdpfx Adewqld Norenn

Condition: good (used), Make: SCHIESS FRORIEP Type: DV 45 Year: 1980 Specifications Metric US Standard Table Length 3000 mm Table Width 3000 mm Table load 40000 Movement V-axis 1600 mm Rotation B-Axis 360000 ° Hnsdpfjku Aalsx Adren Rotation speed B-Axis 100 Grad/Min Omw/min. Movement speed V-axis 4500 mm/min. Dimensions (Estimate) Length 5320 mm Width 3000 mm Height 1080 mm Weight 24000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, faceplate diameter 2500 mm swing diameter 3200 mm turning height 3100 mm Control R&D type MTC 2x-2 workpiece weight 20000 kg slide adjustment 1600 mm side head - cross travel 1000 mm Refurbished 1996 Many accessories Tool holders Jaws Jaw extensions The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Hnjdoyq Swzepfx Adron

Condition: used, Year of construction: 1972, spindle diameter 180 mm x-travel 8000 mm y-travel 4000 mm Control Siemens type Sinumerik System 3 ram: horizontal adjustment 800 mm Spindle travel W-axis 1400 mm ram: diameter 220 mm engine output 75 kW turning speeds 900 U/min Plate area 8000x6000 mm Overhauled in 1983 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Hnedpfx Ajyqv Evjdrjn apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team