Used mesh welders for sale (43)

Condition: excellent (used), functionality: fully functional, welding power (max.): 180 kVA, Schlatter Posiweld type Libra. Machine was built in 2005, control was upgraded by Schlatter in 2022. Cjlexlvn Eohcdwzjpw

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Colhcdsvvf T Aewzepw

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Wire mesh welding system (Schlatter MG316d) H6.1, Spool pay-off system, line wire LEU1.1, Line wire end supervision RZ2, Alignment device with center adjustment LHV5, Line wire pull-off device LHA5, Line wire compensating system loop RZT, Alignment device with center adjustment LVR6, Line wire roller advance unit MG26.26.3, Welding machine H17, Spool pay-off system, cross wire DV6, Prefeeding system DA4, Loop control device DES5.1, Cross wire pull-in and feeding device SD3, Cross wire shear QAE6, Cross wire feeding device SL4.3, Mesh shearing machine MST17.4, Mesh stacking device RGW-L, Roller conveyor SAB2.1, Automatic tying device Celhcdwexgg Rtjzspw RGW-L, Roller conveyor RGW-L, Roller conveyor SPH3/6000, Mesh package stacking device RGW-S, Roller conveyor MP PLS S7-1500, Control center E10-80, Wire butt welding unit

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, QRP26 Automatic Mesh Welding Portal inclusive of: • Tooling for 49 line wires • Top and bottom electrodes and current distribution • Pneumatic weld presses x 25 (Parallel/Direct Weld Triplex) • Transformers 250kvA x 13 • Weld controllers • Electrical panel • Programming computer • 2500mm (100”) wide Including PLL 26 automatic linewire picking and loading system. Celhcdoxgg T Uowzepw

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,700 mm, welding power (max.): 600 kVA, wire diameter (max.): 6 mm, type of input current: three-phase, MG950 Mesh Width (Cross Wire Length) for lower feed, single-row: 200 – 900 mm for upper feed, single-row: 200 – 1700 mm for upper feed, double-row (usable width): max. 1530 mm Mesh Length: max. 3200 mm min. 350* mm Distance between the outermost longitudinal wires: max. 1600 mm Longitudinal wire pitch: min. 20 mm Cross wire pitch: min. 10 mm steplessly programmable Clear opening longitudinal wire: min. 15 mm Clear opening cross wire: min. 8 mm Longitudinal wire diameter: 2.0 – 6.0 mm Cross wire diameter: for lower feed: 1.5 – 4.0 mm for upper feed: 2.0 – 6.0 mm Longitudinal wire overhang: max. 300 mm, min. 10 mm Cross wire overhang: max. 300 mm, min. 5 mm Number of individual welding groups ESG: 12 Celhcdwoym An Aszopw Number of portal welding groups PSG18: 12 Max. number of longitudinal wires: 12

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: GA0500VBG1780, working width: 1,600 mm, wire diameter (max.): 8 mm, type of input current: three-phase, nominal power at 50% duty cycle: 100 kVA, input voltage: 400 V, air pressure: 6 bar, electrical fuse: 800 A, We are offering this used Ideal GAE 516/07-07-20 mesh welding machine, manufactured in 2017. Manufacturer: Ideal Model: GAE 516/07-07-20 Cpjlhceym Aqdodwzew Year of manufacture: 2017 Condition: used Machine type: mesh welding machine For resistance welding using single-phase DC technology, suitable for shopfitting and industrial mesh panels, wire shelves, reinforcements, and other wire products. Special features: - Loading magazine for flat bars (maximum 2,000 mm) - Automatic feeding of lower cross wires (4 - 8 mm) for the production of double wire mesh panels - 2 units of trimmers for shearing off cross wire ends on the welded product The machine is fully operational and can be inspected in operation. Only approximately 80,000 mesh panels have been produced on this machine in total. Mesh width: 250 – 1,600 mm Mesh length: 450 – 2,200 mm Welding width: 1,600 mm Longitudinal wire diameter: 2.5 – 8 mm Cross wire diameter: 2.5 – 8 mm Minimum longitudinal wire spacing: 25 mm Minimum cross wire spacing (clear width): 10 mm Pneumatic welding cylinders: 7 units Three-phase current 400 V / 50 Hz Fuse: 800 A/phase Air pressure: 6 bar Air consumption: 20.0 Nl/cycle Cooling water consumption, 4 bar, 21-25°C: approx. 80 l/min. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, EVG Welding mesh line | model SLW 12/94 – RV Technical data: Mesh width max.: 2600mm Mesh length max.: 8000mm Cross wire pitch min.: 50mm then continuous Longitudinal wire pitch: 100mm, 150mm, 200mm, 300mm Cross wire diameter: min. 4mm - max. 8.5mm Longitudinal wire diameter: min. 4mm - max. 12mm Max. welding power: (D=100mm) E + F = 20.5mm Machine speed (see operating diagram): max. 130 QD/min Wire spool weight: max. 3000kg Stacking height: max. 650mm Stacking weight: max. 4000kg Electrical data: Nominal power of welding transformers: 1500 KVA at 50% of the duty cycle Drive power: 355KVA Mains voltage: 3 x 400V Mains frequency: 50 Hz Status: Line currently still in production. Celhcoymcp Todwzspw Mesh width max.: 2600 mm Mesh length max.: 8000 mm Cross wire pitch min.: 50 mm then continuous Longitudinal wire pitch: 100 mm, 150 mm, 200 mm, 300 mm Cross wire diameter : 4 - 8.5 mm Longitudinal wire diameter: 4 - 12 mm Max. welding power: (D=100 mm) E + F = 20.5 mm Machine speed (see operating diagram): max. 130 QD/min Wire spool weight: max. 3000 kg Stacking height: max. 650 mm Stacking weight: max. 4000 kg Nominal power of welding transformers: 1500 KVA at 50% of the duty cycle Drive power: 355 KVA Mains voltage: 3 x 400V Mains frequency: 50 Hz

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Cpsleymcpyohcdwzow Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: used, EVG G95 Reinforcing mesh welding line 2.5x6m Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes - Automatic and highly dynamic feeding of wires from coils - Top production speeds on single-step welding lines - Double point welding is perfect technology for thicker wire diameters Scope of supply: Full machine including stands Optional: Fixed spools up to exit conveyor Technical data: Diameter line and cross wire: 5 – 12 mm Cpelheymb Unjcdwzsw Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands for 3Ton reel Cross wire switch with doubles horizontal pay offs Tying and mat lift machine not included Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands: for 3Ton reel Cross wire switch: with doubles horizontal pay offs

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. Cpoloil Agnehcdwzew The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.

Condition: excellent (used), Year of construction: 2009, PRATTO Mesh Welding line for 3D fence panels (and light mesh for construction use) Model Starweld POB-36-2100; Celhcsudipfedwzjpw production of mesh panels and 3D/bent mesh panels; mesh width: 2100mm; wire dia. longitudinal + cross wires: 3-6mm; line wire spacing min.: 50mm; cross wire spacing min.: 25mm; SPM: up to 140; 5 x 250 KVA transformers; max. number line wires: 42 with 50mm wire spacing; max. length of panels: 6000mm (20′); line consists of: payoff system; straightening-propulsion for longitudinal wires; loop LAR; powered straightening; cross wire payoff unit; cross wire loop; auto cross wire feed; welder; mesh trimming shear; mesh bending press; mesh ejection + stacking-turner; exit rolls

Condition: excellent (used), Year of construction: 2007, COMPLETE mesh welding plant Plant consist of - Cpjlhcdwewr Tk Hezew 1. Mesh welding line SCHLATTER model MG-230 Min/Max wire diam - 3,5 - 14,00 mm Max width of mesh - 2.500mm Line and Cross wire feeding - from precut wires / bars Construction year - 2007 2. COMBINED rolling/ribering/straightening/cutting line Line is COMBO - wire rolling/ribering/straightening/cutting Construction year - 2023. 3. Straight and cut machine WAFIOS model R-41-L Min/Max wire diam - 3,00 - 10,00 mm Max cutting length - 10.000 mm Construction year - 1990. Please contact us for more details. VIDEOS AVAILABLE upon request.

Year of construction: 2005, condition: excellent (used), FOR SALE - complete production line for EPS wire mesh panels for construction use. Construction line is made in year 2005. but have only 300 working hours. Still installed. Made in Italy. Celhcoimhpyjdwzopw Please contact us for more details. Thank you!

Condition: excellent (used), Complete production plant for production of 3D fence panels Plant consist of - Mesh line for 3D fence fully automatic ( Brand - PRATTO ) Celhcdetywvuewzjpw Powder coating line for 3D fence panels ( like new...only installed and tested) Please contact us for more details.

Condition: good (used), Year of construction: 1991, Mesh welding line EVG model G95/102 Cpoljvxq Eiehcdwzew Min / max wire diam - 4,00 - 12,00 mm Max width of mesh panels - 2.750 mm FULLY AUTOMATIC - Lines wires and CROSS wires feeding from coils / spools. Please see attached document !

Condition: used, Year of construction: 2000, Schlatter mesh welding line Please contact us for more details. Thank you! Celhjtmw Nyscdwzopw

Condition: excellent (used), Year of construction: 2020, Mesh welding line Brand - Schnell Italy Cpjlhcdjvuhvqowzjw Construction year - 2020. Min/Max wire diametr - 4,00 - 12,00 mm Max width of mesh panels - 2,500 mm Max length of mesh panels - 9,000 mm Line wires feeding - from precut wires Cross wire feeding - from precut wires Condition - EXCELLENT !!

Condition: used, Year of construction: 2002, functionality: fully functional, SCHLATTER model MG 316 Mesh welding line Technical Details - • Purpose: For the production of standard mesh • Manufacturer Schlatter • Condition: Not in operation • Longitudinal wire Ø min: 3 mm • Longitudinal wire Ø max: 8.5 mm • Crosswire Ø min: 3 mm • Crosswire Ø max: 8.5 mm Cpjlhcdwev Unt Nezsw • Cycles (transverse wires) max: approx. 120 • Max mat width: 2500 mm • Max nr. of longitudinal wires: 26 • Longitudinal wire feed: From coil • Crosswire feed: From coil • Longitudinal wire spacing: 100/150/200 mm • Crosswire spacing: 100-400 mm • Year installed: 2002 • Weight: ca. 30’000 Kg

Condition: excellent (used), Year of construction: 1999, FULLY AUTOMATIC - EVG G55/102 MESH WELDING LINE Construction year – 1999. Line is refurbished 4-5 years ago. Electrical cabinet completelly updated in software, PLC S7-405 and electrical systems in DECEMBER 2018. Line + cross wires from coils Mesh width: min. 1200mm to max. 2500mm Mesh length: min. 2000mm to max. 6000mm Separations between AT: 50mm – 1000mm stepless Separations between AL: 100mm, 150mm, and multiples Diameter AT: min. 3,8mm to max. 8mm Diameter AL: min. 3,8mm to max. 8mm Machine speed: max. 150 QD/min. Reel weight: max. 3000 kg Stack height: max. 700mm Panel weight: max. 150 kg Power rating of welding transformers at 50% intermittent duty: 960 KVA Drive power: 153kW Tension de red: 3 x 400V Network frequency: 50 Hz Dimensions (approx. mm) Machine: L x W x H Weight: G55L/102-RV 4900mm x 1800mm x 2300mm 15,000 kg T6B/102 7500mm x 2200mm x 1800mm 6,000 kg T6B/102 5200mm x 1700mm x 2200mm 4,200 kg Cpolhcdjxvmamowzjw Main Voltage: 3 x 400 V Frequency: 50 Hz Connection power: 960 kVA (50% S.I.) 192 kVA (drive force) 24 longitudinal wire straightener Longitudinal wire dragger Lars loop Longitudinal straighteners Longitudinal feed Welding head Shears Mesh extraction Turner stacker Exit table of 7m Cross feeders Cross wire drag

Condition: used, Year of construction: 2014, 3D fence panels production line PRATTO High performance mesh welding line designed to produce high quality wire mesh 3D fence panels including Eurofence and "V" shaped fence. Equipped with bending unit that allows for precise shaping of wire mesh Mesh width: 2500 mm, Distance between two outer most line wires: 2500 mm Line wire diameter range: 4 to 6 mm Cross wire diameter range: 4 to 8 mm Number of line wires maximum: 42 Single cross wire hopper fed Cross wire spacings: 50 - 500 infinitely programmable Line wire spacing: 50 mm, programmable in 50 mm steps Line wires from coils of wire Total power Kw: 1250 Voltage: 400v-3-50 Cpolhstmw Nrjcdwzow

Condition: good (used), Year of construction: 2003, functionality: fully functional, FULLY automatic mesh welding line SCHLATTER DOUBLE CROSS WIRE FEEDING / WELDING Model - MG320 Year - 2003. Cjlhcdwjq Aumuezepw Line and cross wires from coils.

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 2,000 mm, wire diameter (max.): 6 mm, type of input current: three-phase, operating speed: 142 mm/s, mesh size: 9,999 mm, continuous power (apparent): 833 kVA, We offer a used Schlatter MG600/MG24.4/10Sp-AC mesh welding machine, model year 2016. Type: MG600/MG24.4/10Sp-AC Serial number: 4885.31609 Cpelhcdsyaqzqowzew Year of manufacture: 2016 Rated primary voltage U1N: 400 V Rated secondary voltage Ua: 230 V Primary phases: 3 ~ Secondary phases: 1 ~ Frequency: 50 Hz Rated apparent power Sp: 833 kVA Rated primary current I1,p: 1202 A Primary short-circuit current I1cp: 50 kA Secondary short-circuit current I’acp: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 2,450 mm, wire diameter (max.): 12 mm, type of input current: AC, Refurbished Schlatter MG903 - ZG24 - Longitudinal wire insertion LFE - Longitudinal wire feed LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mat extraction MVL4.2 - De-stacker MS12 Control and power cabinet - Siemens S7 TIA machine control Cpelhcdsv Ed Anowzew Mesh size : 2450mm Wire: 2-12mm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, wire diameter (max.): 12 mm, type of input current: AC, Machine Overview: Schlatter MG900 MG12 Mesh Welding Machine - "Offical Expose upon request" The Schlatter MG900 is a powerful and refurbished resistance welding machine, specifically designed for the production of wire mesh panels. With a width capacity of up to 1250 mm and a length of 3000 mm, it handles wire diameters of up to 12 mm. This machine has undergone extensive modernization to deliver maximum efficiency and flexibility in production. Main Components • LV - Longitudinal Wire Feeder o Upgraded with a high-precision servo axis o Hopper magazines for longitudinal wires up to 3000 mm • MG12.4 - Mesh Welding Unit o Equipped with 3 to 6 transformers. o Up to 12 Schlatter welding presses with a capacity of 5 kN •QFD34 - Cross Wire Feeder o Allows for double cross wire insertion for two different cross wire diameters / length, *Note: The second level is not yet installed in the photos • MVL - Mesh Extraction Unit o Controlled by a new MS2N Servo Motor from Bosch Rexroth CrtlX o Equipped with four Schlatter mesh grippers (expandable upon request) • MS - Mesh Stacker o Automatically stacks mesh panels with a travel path of up to 3100 mm • Control and Power Cabinet o Siemens S7 TIA Control System o Rexroth CrtlX Components for high-dynamic motion control Specs: • Mesh Width (Transverse Wire Length) max. 1250mm / min. 200mm • Mesh Length (Manual Loading) max. 3200mm / min. 300mm • Distance Between Outer Longitudinal Wires max.1200mm • Longitudinal Wire Spacing 20 - 150mm • Cross Wire Spacing min. 12.5mm • Longitudinal Wire Diameter 2.0 - 10.0mm Cslevtg Sbjhcdwzopw • Transverse Wire Diameter 2.0 - 8.0mm • Maximum Number of Longitudinal Wires max.24

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame Celjwu Tu Djhcdwzjpw - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24