Lathe

Schaublin 102 N-VM

Workspace
Tip height 102 mm
Centre width
- with normal headstock 450 mm
- with reduction gear headstock 375 mm
- over the cheek 200 mm
- over the slide 120 mm
Headstocks
Gslsbxkl Tshcdwweit
spindle nose for collets type Schaublin W25
spindle bore 25 mm
Collet bore 20 mm
Reduction ratio of the gearbox 1:5
Cheek
Height x width x length 168 x 130 x 1000 mm
cast iron cheek, trapezoidal profile like lathe 102 N and dovetail guide hardened
and ground.
Slide
Largest travel on the cheek 400 mm
Tool slide width - length 80 - 194 mm
Path manual adjustment 90 mm
Center height above tool slide 20 mm
Shaft of the lathe tools 12 x 12 mm
cross slide width - length 94 - 300 mm
Path manual adjustment 100 mm
Bed slide length of the guide on the cheek 250 mm
Lead screw
Guiding spindle for longitudinal turning and threading, Ø 40 mm
Lead screw hardened, thread ground, pitch 4 mm
Speed range
Speed 270 - 3000 rpm
Longitudinal turning 0.02 - 0.3 mm/rev.
Thread cutting
Largest pitch with standard change gear set 4 mm
Machine plate for 20 metric pitches 0.25 - 4 mm
Machine plate for 25 english pitches 80 - 6 G/"
Tailstock
Diameter of the quill 30 mm
Inner taper of the quill 2 MORSE
Distance of the quill 80 mm
Cooling device
Coolant tank - capacity 23 litres
Net weights
Lathe on workbench, approx. 225 kg
Lathe on box base, approx. 550 kg

The listing was translated automatically. Translation errors are possible.