Center Lathe

POREBA TPK 90

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 660 mm, turning diameter over bed slide: 900 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, overall weight: 7,000 kg, Poreba TPK 90A1/2M Chuck 800 mm 2000mm between Centres Swing over bed 900 mm Swing over saddle 660 mm Spindle Speed 710 rpm Weight 7000 kg approx. Ijdpfx Aiswbd Dvsdsif

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Iedpst Akt Rofx Aideif Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: good (used), Manufacturer: POREBA Type: TPK 90 / 110 Year of manufacture: 1994 Swing steady 1 is 150 mm Swing steady 2 is 350 mm Iodpfx Aswrrbkeideif Swing steady 3 is 500 mm 3 units suitable for TPK 90 (or with spacers TPK 110) Spacers are not included 2nd tool post to be mounted on slide Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 1200 mm Width 800 mm Height 1000 mm Weight 1800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.

Condition: ready for operation (used), Year of construction: 1984, spindle speed (max.): 800 rpm, spindle motor power: 16,000 W, total height: 1,800 mm, overall weight: 7,300 kg, number of axes: 2, This Poreba TPK 90/5M horizontal turning machine was manufactured in 1984. It features a swing over bed of 930 mm, a spindle bore diameter of 95 mm, and can handle workpiece weights up to 9,000 kg with two steady rests. It includes a tailstock, coolant pump, chuck guard, and tool holder. Consider the opportunity to buy this Poreba TPK 90/5M horizontal turning machine. Contact us for more information about this machine. Additional equipment • Standard equipment includes Coolant pump, Chuck guard, Tool holder • Optional equipment available: 3- or 4-jaw chuck, various diameters and versions • Digital Read Out (DRO) for 2 axes, incl. display, installation, and calibration • Steady rest 40–400 mm with rollers • Steady rest 400–600 mm with rollers • MULTIFIX quick-change tool post Machine Benefits Technical Machine Benefits • Distance between centers / turning length: 5000 mm Iedpfxeyaqinj Aidsif • Swing in gap: 1200 mm • Maximum workpiece weight between centers: 6000 kg • Maximum workpiece weight between centers + 1 steady rest: 7500 kg • Maximum workpiece weight between centers + 2 steady rests: 9000 kg • Number of feeds: 80 • Feed range (mm/rev): - longitudinal: 0. 1 – 12. 8, - cross: 0. 05 – 6. 4 Extra Information Machine completly overhauled. Comes with 12 months warranty. Dimensions Machine Depth 7500 mm

Condition: not inspected (used), Please see technical details on photo. Iijdpfx Aishvzxzedef

Condition: new, A huge stock of spare parts for Poreba lathes: TR55, TR70, TR70B, TR80, TR90, TR90B, TR100B, TR115, TR135, TR135B, TCC125, TCA125, TCA 160, TCG125, TCG160, TCG200, TPC90, TRP110MN, TZG250, TNA90N and many more. Iiodpfx Aiov R Uauedsf - wheels, shafts and gears - toothed racks - lead screws with nuts - cross slide screws with nuts - electromagnetic clutches and brakes, brush holders - pumps, filters, motors - steady and movable rests - tailstock sleeve - tool post - lathe chuck Ask for more.

Condition: used, turning diameter over bed 930 mm turning diameter over slide rest 630 mm turning length 6000 mm turning dia. in gap 1250 mm spindle diameter 95 mm Iodpeyuqd Ujfx Aideif speed 8-800 (x24) U/min total power requirement 22 kW weight of the machine ca. 1100 t

Condition: used, functionality: fully functional, Single-toggle jaw crusher Feed opening: 1,000 x 200 mm Iisdpfx Aiow U Thcedjf with smooth crushing jaws optional: with electric motor and/or with steel subframe

Condition: excellent (used), Four-jaw chuck make Röhm diameter 315 mm single adjustable jaws Iodpspk A A Hsfx Aidoif bolt circle 120 mm

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Iedpfx Ajvyyyxjideif Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg