CNC milling machine with tool changer

DECKEL FP 3 ATC

Condition: excellent (used), Four-jaw chuck make Röhm diameter 315 mm single adjustable jaws Ijdpfx Afjpk A A Hj Ujif bolt circle 120 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Swing over bed 1,300mm, over cross slide 1.000mm, swing in gap 2,100mm, center distansen 1,500mm, 2,350mm with open bed. Spindle bore 128mm, 450 Rpm, 50 Kw, Chuck 800mm, 4-jaw plate 900mm. Fagor CNC, weight ca 12.000kg Isdpjxqp I Njfx Af Ujif

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Iisdpfexmd Uvjx Af Ujf Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Iiedpfx Afewd D Ite Ujf

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Iiedpfx Afsy Sf Azo Uof Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: good (used), VEB Fritz Heckert FU 250x1000 milling machine Manufacturer: VEB Fritz Heckert Iedpetryc Njfx Af Ujif Type: FU 250x1000 X-axis: 900 mm Y-axis: 300 mm Z-axis: 380 mm Speed: 28-2800/min Speed: 10-630 mm/min Dimensions: 1240 x 340 mm Speed: 6 kW, 35 A Load: 1.7 t Dimensions: 1580 x 1420 x 1470 mm

Condition: used, Technical details: diameter: 400 mm tool adaptor: 50 Weight: 12 kg slide adjustment: 52 mm feeds: 0,02 - 0,24 mm/U fine adjustment - cross: 0,01 mm turning speed range: 0 - 600 U/min Tool taper: 22 mm Iiedpfovb A Sgex Af Uef

Condition: used, turning diameter over cross slide: 390 mm, spindle bore: 82 mm, turning diameter over bed slide: 650 mm, overall weight: 3,000 kg, spindle mount: MK 5, Conventional Lathe Brand: Geminis Model: GE 650 Power: 12.5Hp Distance between centers: 2,000mm Maximum swing over bed: 650mm Maximum swing over gap: 820mm Maximum swing over carriage: 390mm Gap length: 310mm Spindle bore: 82mm Number of speeds: 18 (16-1250) Carriage width: 620mm Tailstock: Morse taper 5 Includes: - 320mm 3-jaw chuck with sets of internal, external, and soft jaws - Conventional tool post + quick-change tool post 140x140mm (2 holders) - Closed steady rest 320mm Iijdpoyc Rucefx Af Usf - Closed steady rest 180mm - Open follow rest - Various gears for different thread pitches Weight: 3,000kg

Condition: ready for operation (used), functionality: fully functional, Distance between spikes: 1000mm Height of spikes: 215mm Diameter over bed: 430mm Spindle bore: 52mm Spindle speeds: 32-1800 RPM Iedpfxori Rnbo Af Ueif

Condition: used, Brand: GEMINIS Model: GHT4 G2 720 x 3000 Cnc: FAGOR 8055 Distance between points 3,000 mm Iedpfx Afey R Evxs Ueif Diameter over bed 720 mm Diameter over carriage 470 mm Bed width 550 mm Rapid traverse X axis 8 m/ min Rapid traverse Z axis 8 m/ min Spindle speeds 0-1600 Number of automatic head ranges 2 Main motor power 20 kW Spindle nose type DIN- 55027-11 MULTIFIX quick change tool holder Quill travel 104 mm Tailstock quill diameter 100 mm Tailstock quill traverse 200 mm Quill tailstock MORSE 6