5-axis portal milling machine

Parpas DIAMOND LINEAR 30

Year of construction: 2021, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 3000 mm Gedpswla Hhefx Ab Dsua TRANSVERSAL TRAVEL: 2600 mm VERTICAL TRAVEL: 1400 mm RAPID FEEDS L-T-V: 60 m/min WORKTABLE: 3100 x 2800 mm HEAD: CONTINUOUS A/B AXIS ; HSK-63A ; A-axis ±110° - C-axis ±370° ; 20000 rpm; 39-37 kW; 92-117 Nm TOOL MAGAZINE: CHAIN-TYPE ; 60 POS CONTROL UNIT: HEIDENHAIN TNC640 OVERALL DIMENSIONS: 7530 x 6600 x 5765 mm ACCESSORIES: FRONT AND BACK SWARF CONVEYOR ; PORTABLE HANDWHEEL

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Gsdpfx Abswbuyzj Dsua

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t Guodoxap Eaopfx Ab Dja dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: used, Dough laminator Manufacturer: Seewer Rondo Model: SSO 62 Dimensions: 305x115x120cm Electrical power: 1.1kW Voltage: 380V 50Hz Godpfew Nw A Tox Ab Deua Tape dimensions: 62x130cm

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, FPT Industrie S.p.A. – Travelling Column / Gantry Milling Machine Model: DINOSPIN Year of manufacture: 2019 Serial number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine weight: 44,280 kg Control: Heidenhain TNC640 (15") RAM: 4 GB Hard drive: 32 GB (min. 21 GB program storage) Gedpeyrndmjfx Ab Dsua Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block processing time: 0.5 ms Handwheel: Heidenhain HR510 (remote handwheel) Universal milling head (5-axis machining, continuous movement on 2 axes) Max. spindle speed: 18,000 rpm Swivel range C: ±270° Swivel range A: ±185° Max. rotation speed A/C: 30 rpm Working torque A/C: 450 Nm Clamping torque axes: 1,400 Nm Positioning uncertainty: 8 arcsec / scatter: 4 arcsec (VDI/DGQ 3441) Spindle power (S1/S6): 22/33 kW Spindle torque (S1/S6): 84/128 Nm Continuous operation, constant power: 2,500–18,000 rpm Continuous operation, constant torque: 10–2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool changer (overlapped-wheel system with tool-change arm) Magazine capacity: 80 tools Max. tool diameter: 75 mm Max. tool diameter with adjacent pocket free: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm (for 40 tools) Max. tool length: 250 mm (for 40 tools) Tool type: HSK-A63 DIN 69893 Measuring systems Laser tool setter: tool length/radius + tool breakage control (software included) Probe for workpiece measurement/alignment: wireless transmission, probing cycles included in CNC Monitoring Sensor for vibration/collision detection: response time approx. 1 ms Coolant system external/internal (LEU/LEIUHP) Tank capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External cooling: max. 30 l/min, max. 10 bar Through-spindle coolant (IKZ): max. 30 l/min, max. 70 bar Additional options/functions External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. • High-pressure coolant (15 bar) • Auto tool length measurement x 2 units • Visiport • 19" screen Guedpfjx D I A Sox Ab Dea • Siemens software P • Signal tower • Additional work light • RMP60 probe • Bracket for NCRT for vertical use • Table centre partition • 48-tool magazine Additional equipment • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 Gjdohqqnzepfx Ab Deua PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning- and Milling Center (Multi-functional-Machine) | Brand: MAZAK Type: INTEGREX e-650H II | Year of construction: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / operational. Operating hours (as at 10 March 2026): - Total: 91.430 h - Automatic operation: 52.054 hours - Automatic machining: 38.974 hours - Pure machining: 31.316 hours TECHNICAL SPECIFICATIONS: Workspace: - Max. Swing diameter: 920 mm - Max. Swing diameter over tool slide: 920 mm - Max. Turning diameter: 1.100 mm Main spindle: - Max. speed: 1.600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1.000 rpm) - Spindle nose: A2-11" - Spindle bearing inner diameter: 220 mm - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4.500 Nm Tailstock (programmable): - Chuck: MK 6 Milling spindle: - Turret type: Single-spindle with ATC - Tool shank: Steep cone 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0,0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10.000 rpm Gusdpfeyuq Dzex Ab Doa - Milling spindle motor, AC: 37 kW Travel ranges: - X-axis: 1.025 mm - Y-axis: 650 mm - Z-axis: 6.423 mm - B-axis swivel range: 240° Dimensions: - Spindle centre height: 1.350 mm - Length: 13.267 mm - Width: 3.938 mm - Height: 3.920 mm - Weight: 41 tons Additional information: - Rated power (100% continuous operation): 99,5 kVA Automatic tool changer: - Number of tools: 120-position, SK50 DIN 69871 SPECIFICATIONS / SPECIAL ACCESSORIES: - Numerical control: MAZATROL MATRIX - Documentation - CE marking - Further excellent optional extras ... Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Dohmeyer Cryogenic Spiral Freezer with Pre-freezing Tunnel Dohmeyer's spiral cryogenic freezers are designed for rapid freezing or chilling of food products using liquid nitrogen (LIN – Liquid Nitrogen). They are mainly used in the food industry, especially for products requiring quick freezing such as meat, seafood, pastries, ready meals, and other delicate products. Model: DOH-SPK-D244-W26-E21-LIN-2017 Type: Cryogenic Freezer Spiral Serial number: 201703033177 Year of manufacture: 2017 Cryogenic gas/operating pressure: LIN / 2…4 bar Compressed air/pressure range: 6…8 bar Power supply: 3x400V + N + PE, 50 Hz Godpfx Abowp Uhbo Deua Weight: 16,000 kg Pre-freezing tunnel/cryogenic tunnel freezer Brand: ENT Edelstahl- und Nahrungsmitteltechnik Type: CFP 600 Serial number: 03 133/2 Year of manufacture: 2017

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: chip conveyor, Options: Left side chip conveyor Coolant temperature control 15,000 rpm spindle Guodpfx Aboycr Nus Doa High-torque spindle Linear scales on axes Losma extraction Automatic door Detachable handwheel 3-color signal lamp Renishaw RMP 600 Continuous 5 axes ISO 5-axis function Performance package Memory extension Robot interface