Lead/traction spindle lathe

OPTIMUM OPTIturn TZ 4

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm Ltjdpfxjg Hkmro Af Ssa infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm Ltjdpfjvambcox Af Sja >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: new, Optimum OPTIturn TZ 4 precision center lathe and feed spindle lathe Precision center lathe with digital position indicator DPA 32 and quick-change steel holder. DESCRIPTION: Hardened and ground Z-axis guideway Motor protection switch Switch cabinet with 24 V DC power supply unit Partial cladding with included, generously dimensioned chip guard Chip guard with integrated position indicator, coolant hose and additional control panel Two-channel safety electronics Face and top slide spindle is hardened and ground and can be adjusted via split spindle nut Lead and feed spindle cover Finely graduated feed and thread cutting range Energy chain for gentle cable and hose guidance The standard gear wheels for metric thread pitches and modular threads are mounted in the machine. Change gears for inch and D.P threads optionally available Switch with life cycle calculation tested in accordance with EN ISO 13849 Decoupled handwheels tested in accordance with EN 23125 Safety handwheels with disengagement function in the X and Z axes Chip tray can be pulled out to the front Coolant device Quick-change steel holder SWH 5-B Steel holder 25 x 120 type D for square chisel 20 mm LED machine lamp for complete illumination of the work area Technical data: Dimensions and weights Length (product) approx. 1960mm Width/depth (product) approx. 1060mm Height (product) approx. 1690mm Weight (net) approx. 1250kg Working ranges Center height 200mm Center width 800mm Rotation diameter over machine bed 400mm Swing diameter over cross slide 245mm Bed width 260mm Speed range Number of speed ranges 16 Speed range 45 - 1800min¯¹ Electrical data Power drive motor 3 / 4.5kW Supply voltage 400V Mains frequency 50Hz Total connected load 6kW Cooling lubricant system Cooling lubricant system Power Coolant pump 0.125kW Spindle Spindle holder DIN ISO 702-1 No. 5 Form A2 Spindle bore/bar passage diameter 52mm Chuck passage diameter 52mm Spindle cone MK 6 Tailstock Tailstock holder MK 3 Tailstock quill stroke 110mm Tailstock quill diameter 50mm Pitch Pitch Metric 0.2 - 14mm/rev Number of leads metric 26 Pitch inch 80 - 1Gg/1" Number of pitches inch 42 Lsdpfx Afshbdz So Sjta Pitch Diametral Pitch 3 - 200Gg/π Number of pitches Diametral Pitch 33 Module thread pitch 0.1 - 7mm/rev Number of module thread pitches 44 Travel distance Top slide travel 112mm Travel of face slide 212mm Bed slide travel 800mm Feed rate Feed range longitudinal 0.0263 - 1.8416mm/rev Number of feeds longitudinal 48 Feed range flat 0.0133 - 0.9321mm/rev Number of feeds flat 48 Scope of delivery Fixed steady rest passage Ø 10 - 130 mm Rotating steady rest passage Ø 10 - 100 mm Reducing sleeve MK3 and MK6 Fixed center point MK3 Quick-change steel holder 5-B Steel holder 25 x 120 type D for square chisels Set of change gears for metric thread Initial machine filling with quality oil Operating tool Integrated coolant system

Condition: good (used), Year of construction: 1988, Weiler lathe Type Condor B 2-axis digital readout Center height 165 mm Center distance 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle bore 40 mm Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Coolant pump (not connected) work light Automatic longitudinal and planar feed spindle brake Lsdpovgmbvefx Af Seta - Folding jaw chuck guard - splash guard Weight approx. 1040 kg 3 jaw lathe chuck Multifix B Rotating center point

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Lodpfx Afew I A Uxe Sota Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: good (used), Year of construction: 1992, 1 used lead and feed screw lathe Manufacturer: Weiler Model: Condor B Year of manufacture: 1992 Ltsdpfx Afow Rcd Ss Ssa Technical specifications: Distance between centers: 750 mm Center height: 165 mm Spindle bore: 40 mm Spindle speed: 22 – 2800 rpm Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Equipped with: 3-axis digital readout 3-jaw chuck Chuck guard

Condition: new, Center length ----- 750 mm Center height ----- 125 mm Turning diameter ----- 250 mm Ltodpfxoq E I Ave Af Sja Passage of main spindle ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30-2200 rpm Frequency motor ----- 1.1 kW INCLUDING * Delta frequency switch * Automatic longitudinal and transverse feed * Thread cutting clock * 3 chuck 125 mm * 4 chuck 125 mm * Clamping plate * Fixed spectacles * Guiding glasses * Back plate * Back plate * Box with various tools Option * Base cabinet

Condition: excellent (used), Year of construction: 2006, Centre height: 160 mm Centre distance: 650 mm Ltedpew Sn Irefx Af Ssa Spindle speed: 2,500 min-1 Multifix Tailstock Accessories

Condition: used, Year of construction: 2007, Technical details: turning diameter over bed: 340 mm Ljdsx Apd Uopfx Af Sjta turning diameter over slide rest: 190 mm turning length: 700 mm spindle turning speed range: 40 - 3000 U/min spindle bore: 50 mm

Condition: ready for operation (used), Weiler Primus Lathe Precision Turning Machine with Accessories Weiler Primus Lathe: Center height: 125 mm Speed range: 40–3000 rpm Distance between centers: 400 mm Spindle bore: 24 mm Accessories: - 35 collets - Chuck - 4 Multifix tool holders - Accessory cabinet Ljdpfoxw R N Uex Af Sjta - Additional accessories as pictured You are welcome to arrange a viewing appointment. We can organize cost-effective shipping for you! You will receive a proper invoice. Net invoicing is possible for foreign customers provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers. Specified company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.