CNC Lathe

MONFORTS KNC 8S

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm Dedswwlt Ropfx Ac Hewd turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, turning height: 1,150 mm, workpiece weight (max.): 5,000 kg, turning diameter: 1,400 mm, feed length X-axis: 750 mm, feed length Y-axis: 180 mm, faceplate diameter: 1,250 mm, total height: 4,000 mm, total width: 3,000 mm, total length: 3,000 mm, type of input current: AC, rotational speed (max.): 315 rpm, rotational speed (min.): 3 rpm, torque: 50,000 Nm, table diameter: 1,250 mm, year of last overhaul: 2021, workpiece diameter (max.): 1,400 mm, overall weight: 12,000 kg, faceplate torque: 14,000 Nm, Equipment: documentation/manual, rotational speed infinitely variable, Very stable and compact Schiess vertical lathe, completely renewed, new electric, Siemens 840D controls. Dedpfxow H A Abj Ac Hewd

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Dodpfx Acexqd Aze Howd Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: ready for operation (used), functionality: limited functionality, center width: 2,985 mm, turning diameter over bed slide: 830 mm, quill stroke: 200 mm, quill diameter: 125 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working range Center width: 2,985 mm Swing diameter over bed: 830 mm Swing diameter over facing slide: 540 mm Travel of the cross slide: 450 mm Displacement of the top support: 250 mm Bed width: 520 mm Face slide width: 280 mm Bed slide guide length: 600 mm Turning tool cross-section: 32 x 32 mm Spindle diameter in the front bearing: 180 mm Spindle holder according to DIN 55027: size 11 Material passage: 130 mm Inner taper of the spindle: metr. 140 Main drive Three-phase motor, infinitely variable Drive power (50/100% ED): 50/37 kW Total speed range: 2 - 1,600 rpm Gear stage I: 2 - 225 rpm Gear stage II: 5 - 559 rpm Gear stage III: 7 - 900 rpm Gear stage IV: 18 - 1,600 rpm Max. Torque at the spindle: 8,750 Nm Speed control: 5 - 200% Load display up to: 125% Feed drive Three-phase servo drives with mechanical safety clutch Longitudinal feed force: 23,880 N Planar feed force: 11,300 N Rapid traverse speed longitudinal/plane: 6.8 / 4 m/min Dsdpfx Acou Hi H So Hswd Thread cutting range Longitudinal and taper threads, pitch: 0.001 - 500 mm Tailstock Quill diameter: 125 mm Quill stroke: 200 mm Inner taper: MK 6 Tool equipment Multifix quick-change tool holder: size D Coolant system Pressure: 3 bar Delivery rate: 40 l/min Machine dimensions Length/width/height: 5,200 x 2,110 x 1,915 mm Machine weight Machine as transport unit: approx. 6,500 kg The FX7002 filter visible in the pictures is not included in the scope of delivery.

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm Dedpfxeu Ix Ize Ac Hswd feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: good (used), Year of construction: 2014, Hurco VMX 84 T, Year of manufacture 2014, WinMax control, X/Y/Z travel 2135/860/760 mm, 40-station tool changer, SK 40 tool holder, Spindle speed up to 18,000 rpm, High-pressure internal coolant system, Simulation graphics, Dodsv S Twuspfx Ac Hswd Electronic handwheel, Pocket milling with islands, DXF software, 3D infrared probe

Condition: good (used), Webster & Bennett CNC Ram Type VTL Year 1986/2005 Table 1500mm dia. 10 Station Automatic Tool Changer Max Turning Dia 54” Fanuc Oi-TC Control Fully Enclosed Guards Automatic Tool changer Dodstv Nm Dspfx Ac Hjwd Tooling Table Jaws Swarf Conveyer

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 580 mm, turning length: 3,000 mm, turning diameter: 850 mm, spindle bore: 130 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 7 m/min, feed length Z-axis: 20,000 mm, feed rate X-axis: 16,000 m/min, turning diameter over bed slide: 850 mm, Technical Data SEIGER SLZ-850-3000 Working Area: Distance between centers: 3,000 mm Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Cross slide travel: 500 mm Bed width: 560 mm Turning tool: Cross-section (height x width): 32 x 32 mm Spindle: Spindle nose acc. to DIN 55027: Size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 130 mm Chuck diameter: mm Main drive AC: Drive power 100%/60% duty cycle: 37/52 kW Max. spindle torque: 6,000 Nm Total speed range: 1–1,600 rpm Feed drive AC: X-feed force 100% duty cycle (transverse): 16,000 N Z-feed force 100% duty cycle (longitudinal): 20,000 N X rapid traverse: 4 m/min Y rapid traverse: 7 m/min Tailstock: Quill diameter: 140 mm Quill stroke: 350 mm Quill taper (internal taper): MK 6 Steady rest (fixed): Passage (max.): 450 mm X-axis: Torque: 27 Nm Z-axis: Torque: 50 Nm Additional hydraulics for chuck: Delivery flow: 24 l/min Pump pressure: 50 bar Tank capacity: 90 dm³ Impulse lubrication: Delivery flow: 0.1 l/min Pump pressure: 30 bar Tank capacity: 2 dm³ Circulating lubrication: Delivery flow: 5 l/min Pump pressure: 0.4 bar Tank capacity: 40 dm³ Permissible workpiece weights: Between centers without steady rest: 5,000 kg Between centers with one steady rest: 6,000 kg Between centers with two steady rests: 7,000 kg Flying in the face plate (center of gravity distance 250 mm): 1,800 kg Weights: Machine: 14,000 kg Frame: 3,500 kg Additional hydraulics: 300 kg Electrical control cabinet: 1,000 kg Space requirement: Machine fully assembled with extraction unit: 8,500 x 5,000 x 3,200 mm Machine fully assembled without extraction unit: 8,500 x 5,000 x 2,500 mm Dimensions (L x W x H): Machine, 3,000 mm center distance, without guarding: 6,400 x 2,200 x 2,300 mm Frame: 7,700 x 1,300 x 2,500 mm Additional hydraulics: 800 x 500 x 900 mm Electrical: Supply voltage: 400 VAC ±10% Rated frequency: 50 Hz Max. current consumption: 200 A Control supply voltage: 24 VDC ±10% Main drive power consumption: 52 kW Impulse lubrication pump power consumption: 0.22 kW Circulating lubrication pump power consumption: 1.0 kW Additional hydraulics pump power consumption: 2.2 kW Djdowk Nxdopfx Ac Hewd Model designation key: SLZ-850-3000 Lathe: SLZ Swing over bed: 850 Workpiece length between centers Machine has been dismantled, no longer under power.

Condition: used, Year of construction: 2002, turning diameter 1000 mm Dwodpfx Aoxfwgpjc Hsd swing diameter 1250 mm turning height 1000 mm Control Siemens 840D total power requirement 110 kW weight of the machine ca. 25 t

Condition: used, Year of construction: 1995, turning diameter 800 mm turning length 2700 mm control Monforts MTC K Dsdpfx Ajwizm Roc Hjwd