CNC Cycle Lathe

Knuth Proton 530 x 2000

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, turning height: 1,150 mm, workpiece weight (max.): 5,000 kg, turning diameter: 1,400 mm, feed length X-axis: 750 mm, feed length Y-axis: 180 mm, faceplate diameter: 1,250 mm, total height: 4,000 mm, total width: 3,000 mm, total length: 3,000 mm, type of input current: AC, rotational speed (max.): 315 rpm, rotational speed (min.): 3 rpm, torque: 50,000 Nm, table diameter: 1,250 mm, year of last overhaul: 2021, workpiece diameter (max.): 1,400 mm, overall weight: 12,000 kg, faceplate torque: 14,000 Nm, Equipment: documentation/manual, rotational speed infinitely variable, Very stable and compact Schiess vertical lathe, completely renewed, new electric, Siemens 840D controls. Djdpjw H A Absfx Ac Hswd

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V Dwodpfju Ix Izjx Ac Hed total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: good (used), Year of construction: 2014, Hurco VMX 84 T, Year of manufacture 2014, WinMax control, X/Y/Z travel 2135/860/760 mm, 40-station tool changer, Dodpjv S Twuefx Ac Howd SK 40 tool holder, Spindle speed up to 18,000 rpm, High-pressure internal coolant system, Simulation graphics, Electronic handwheel, Pocket milling with islands, DXF software, 3D infrared probe

Condition: good (used), Webster & Bennett CNC Ram Type VTL Year 1986/2005 Table 1500mm dia. 10 Station Automatic Tool Changer Dodpstv Nm Defx Ac Hjwd Max Turning Dia 54” Fanuc Oi-TC Control Fully Enclosed Guards Automatic Tool changer Tooling Table Jaws Swarf Conveyer

Year of construction: 2000, condition: used, turning diameter 530 mm turning length 1500 mm control Fagor centre height 260 mm swing diameter 475 mm swing diameter over flat guideway 530 mm swing diameter over bed slide 315 mm bed width 350 mm spindle bore 80 mm spindle taper innen MK5 turning speeds 2 turning speed range 0-650/650-2500 U/min feed range 0 - 7000 mm/min Dwjdjiu A Daopfx Ac Hsd rapid traverse 10 m/min diameter of quill 72 mm quill travel 180 mm weight of the machine ca. ca. 3,5 t dimensions of the machine ca. L/B/H 3,50x1,50x180 m

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 580 mm, turning length: 3,000 mm, turning diameter: 850 mm, spindle bore: 130 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 7 m/min, feed length Z-axis: 20,000 mm, feed rate X-axis: 16,000 m/min, turning diameter over bed slide: 850 mm, Technical Data SEIGER SLZ-850-3000 Working Area: Distance between centers: 3,000 mm Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Cross slide travel: 500 mm Bed width: 560 mm Turning tool: Dsdpfxewk Nxdj Ac Howd Cross-section (height x width): 32 x 32 mm Spindle: Spindle nose acc. to DIN 55027: Size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 130 mm Chuck diameter: mm Main drive AC: Drive power 100%/60% duty cycle: 37/52 kW Max. spindle torque: 6,000 Nm Total speed range: 1–1,600 rpm Feed drive AC: X-feed force 100% duty cycle (transverse): 16,000 N Z-feed force 100% duty cycle (longitudinal): 20,000 N X rapid traverse: 4 m/min Y rapid traverse: 7 m/min Tailstock: Quill diameter: 140 mm Quill stroke: 350 mm Quill taper (internal taper): MK 6 Steady rest (fixed): Passage (max.): 450 mm X-axis: Torque: 27 Nm Z-axis: Torque: 50 Nm Additional hydraulics for chuck: Delivery flow: 24 l/min Pump pressure: 50 bar Tank capacity: 90 dm³ Impulse lubrication: Delivery flow: 0.1 l/min Pump pressure: 30 bar Tank capacity: 2 dm³ Circulating lubrication: Delivery flow: 5 l/min Pump pressure: 0.4 bar Tank capacity: 40 dm³ Permissible workpiece weights: Between centers without steady rest: 5,000 kg Between centers with one steady rest: 6,000 kg Between centers with two steady rests: 7,000 kg Flying in the face plate (center of gravity distance 250 mm): 1,800 kg Weights: Machine: 14,000 kg Frame: 3,500 kg Additional hydraulics: 300 kg Electrical control cabinet: 1,000 kg Space requirement: Machine fully assembled with extraction unit: 8,500 x 5,000 x 3,200 mm Machine fully assembled without extraction unit: 8,500 x 5,000 x 2,500 mm Dimensions (L x W x H): Machine, 3,000 mm center distance, without guarding: 6,400 x 2,200 x 2,300 mm Frame: 7,700 x 1,300 x 2,500 mm Additional hydraulics: 800 x 500 x 900 mm Electrical: Supply voltage: 400 VAC ±10% Rated frequency: 50 Hz Max. current consumption: 200 A Control supply voltage: 24 VDC ±10% Main drive power consumption: 52 kW Impulse lubrication pump power consumption: 0.22 kW Circulating lubrication pump power consumption: 1.0 kW Additional hydraulics pump power consumption: 2.2 kW Model designation key: SLZ-850-3000 Lathe: SLZ Swing over bed: 850 Workpiece length between centers Machine has been dismantled, no longer under power.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC cycle lathe Year of manufacture: 2003 Control: Fanuc 210i-T Dwodpfxswww Nds Ac Hjd Spindle bore: 102 mm Chuck: 315 mm Turret: 4-position Travel: X 300 mm / Z 2,000 mm Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Tool package: 32 tool holders Various accessories, documentation

Condition: used, Year of construction: 2002, turning diameter 1000 mm swing diameter 1250 mm turning height 1000 mm Control Siemens 840D Djdpfx Acexfwgps Hswd total power requirement 110 kW weight of the machine ca. 25 t

Condition: used, Technical details: turning diameter over bed: 830 mm turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg max. workpiece weight -without tailstock: 3000 kg turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Djdpjwmlknofx Ac Hjwd Three-jaw chuck D=500mm without clamping jaws Various accessories *

Condition: used, Year of construction: 1995, turning diameter 800 mm Dsdpewizm Rofx Ac Hswd turning length 2700 mm control Monforts MTC K