Tool Room Milling Machine - Universal

MIKRON WF 31 D

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Hfjdsxcxz Nspfx Acwob

Condition: like new (used), Manual profile grinder UTMA model P20 Hfsdpsff H E Rofx Acwjb

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Hfjdpfxowiucfs Acweb Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2004, Universalfräsmaschine mit Streckensteuerung HEIDENHAIN TNC 124 mech. Handräder drehbarer Kipptisch +- 45°, hydr. Werkzeugspannung, Hfjdpfeigm Tcox Acwob Halbkabine Kühlmittelbehälter Handbuch Technische Details: x-Weg 600 mm y-Weg 400 mm z-Weg 400 mm Spindeldrehanzahl 63 - 3.150 1/min Vorschub stufenlos 12-3000 / 6-1500 (Z) mm/min Pinolenhub 100 mm Kopf schwenkbar +/- 90° Spindelaufnahme ISO SK 40 Aufspannfläche 630 x 400 mm Gesamtleistungsbedarf 8 kW Maschinengewicht ca. 2,2 t Raumbedarf ca. 2 x 1,9 x 1,95

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine Hfedoi Eg Nkopfx Acwob -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Hjdpfx Acog Stz Ajwefb Backstop: Yes Power: 78 kW Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm

Condition: new, Guide and pull spindle lathe Bernardo Standard 165 D Technical specifications Tip width: 1000 mm Tip height: 175 mm Circulation diameter over bed: 350 mm Circulation diameter over crumpling*: 450 mm Orbit diameter via flat slide: 190 mm Bed width: 180 mm Spindle bore: 40 mm Spindle holder: DIN 55029, D1-4 Speed range: (8) 70 - 2000 rpm Range of longitudinal feeds: (40) 0.053 - 1.29 mm/U Area of plan feeds: (40) 0.013 - 0.31 mm/U Metric threads: (32) 0.4 - 7 mm Inch Thread: (36) 4 - 60 Gg/1" Pinole path: 110 mm Pinole holder: MK 3 Engine power: S1 100% 1.5 kW (400 V) Motor recording power: S6 40% 2.2 kW (400 V) Machine dimensions (W x D x H) 1730 x 700 x 1340 mm Hodpfed Ri Ezex Acwefb Weight approx. 514 kg * Bed length removable Delivery • 3-axis i200 digital display with LCD display • 3-jaw chuck DK11-160 mm / D4 • Flat disc 200 mm / D4, according to DIN 55029 • Fixed bezel - pass diam. max. 60 mm • Running bezel - pass diam. max. 60 mm • Clamping disc 250 mm • Quadruple steel holder • Shaft fixing device • Protective device for steel holders • Slip clutch • Micrometer longitudinal stop • Coolant device • Extendable chip newfir • Motor with magnetic brake according to CE standard • Foot pedal with brake function according to CE • Spray wall • Threaded watch • LED machine light • Reducing sleeve • Interchangeable wheels • 2 centering tips • Base • Operating tool

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Hfedpomw Ukcofx Acweb Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg Hfodpfx Ajfbma Nscwjb

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y Hjdpfxsd Tx A Ej Acwsfb 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock