Used debarkers for sale (69)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, overall weight: 30,000 kg, The machine is currently still in operation and can be inspected at any time. Location – Zingsheim. A 5, 27-inch up to 680 mm diameter. Feed up to max. 90 m/min. Weight approx. 30 tons. Shortest wood: 2.4 m. Also well-suited for long timber. Some components should be serviced or repaired upon reinstallation, e.g. valves, swing arm bearings, etc. The rotor bearing is in good condition. The rotor has been replaced. Lhsdjx E Tb Sopfx Abnod

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, The CAMBIO 66 log debarker is equipped with the latest generation AIR TEN rotor.Knife sytem CAMPRO TRIMAX. Lhedpfx Abshkh Hxenod The debarker is sold after major repairs. The sales package includes the centering conveyor SODERHAMN.

Condition: ready for operation (used), Cambio 75 feed conveyor, infeed conveyor wheels Lhodpfx Abev Irvuenod

Condition: reconditioned (used), VK 450 The debarker has been completely refurbished Lhsdpfxeq Hr N Ij Abnjd

Condition: new, Year of construction: 2026, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive Lhsdpou Rpibjfx Abnsd - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: good (used), Year of construction: 2006, functionality: fully functional, 2 units debarking machines: 1x VK5068 and 1x VK32 in TOP CONDITION. VK5068 debarking diameter 100-680 mm / VK32 100-820 mm. Machine with Air-Seal technology, enabling adjustment of knife pressure during the debarking process. Lhedpfx Aoyryvusbnod

Condition: reconditioned (used), B., VK26M (1974 series) with motorized discharge table: - Main engine - Feeding table ( driven ) - Output table - Control cabinet Including infeed and outfeed table, workshop inspected * - debarking capacity: 10cm - 61cm diameter - 4 main decision makers - 4 cutting blades - Rotor speed =235 rpm / min - Rotor öppning=65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( length of wood ) Dimension ( without infeed and outfeed table ) L= 9840mm Entry table: Ledpfx Aofn Iu Iebnjhd 3540mm x 1000mm x 1900 Main engine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: Piece V-belt for rotor drive Pos 4 1 Gear oil Pos 5 1 Material: Abrasive + Colours Pos 6 4 Valonkone piece peeling knife Pos 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta-start for 30 kw main motor with 3-phase delta start for 11 kW geared motor with start for 4 kw gear motor supply with start for 4 kw gear motor output Main Starter Emergency STOP

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer with radio remote control Lsdsn Skz Tspfx Abnohd

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008-176, The Cambio 500 is a debarker for small logs up to 495 mm (20 inches) in diameter. It operates at feed speeds of up to 120 m/min (393 ft/min). Thanks to its reliability, minimal maintenance requirements, and ultra-low operating costs, the Cambio 500 is the first choice for leading wood processing companies worldwide. Its triangular feed system and carbide-tipped debarking tools, powered by compressed air, are among the key features that ensure superior debarking results. Lhedpfsyl Aqhjx Abnsd Complete with a feed conveyor. The machine was not in operation and was in storage.

Condition: good (used), A Nicholson A7/22" is offered for sale. The machine can be purchased as is or refurbished. Drive motors are included in the offer Lhedpfx Abot Tdvyened

Condition: like new (used), functionality: fully functional, Completely restored guidework for debarker, as good as new Lhedeq Dp Eropfx Abnjd

Condition: good (used), log diameter 100-660mm Lhedsv Ap Siopfx Abnod transverse and longitudinal feeder included

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Ledpetuyr Iefx Abnshd Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Hydraulic milling head 22 kW motor Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

Condition: used, Year of construction: 1993, Häwa debarking milling machine H249 / 1000 Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Milling head: 30 kW Root reducer: 37 kW Consists of: Lsdpex Rv T Iofx Abnehd - Cross infeed conveyor - Debarking - Conveyor belts - Outfeed conveyor

Condition: used, Year of construction: 2000, Debarking unit type VK 32 !! Sale on behalf of customer !! Lhodpfswwladex Abnsd

Condition: used, Häwa debarking Lsdpfodfd R Tjx Abnjhd Type H249 / 800 -Head: working width 300 mm, hammers, cutting blade and baking ring Carbide tipped milling head Master drive wheel 1000 mm diameter 0, 25 m - 1, 25 m stem length 1, 5 m - 6, 0 m with Cabinet and complete documentation

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11598-A, overall weight: 3,900 kg, input frequency: 50 Hz, input voltage: 380 V, We are offering this used TAYME P-60 debarker, year of manufacture 2011. Technical Data – Debarker TAYME P-60 Peeling Machine (Year 2011) Manufacturer: TAYME S.A. Model: P-60 Machine type: Log debarker / Peeling machine Year of manufacture: 2011 Serial number: 11598-A Weight: 3,900 kg 1. Mechanical Specifications Tool type – Peeling heads with toothed knives Maximum pressure – 400 bar 2. Electrical Specifications Rated voltage – 380 V (three-phase) Frequency – 50 Hz Estimated power – approx. 25 kW 3. Hydraulic System Hydraulic flow rate – 22 l/min (according to nameplate) Maximum pressure – 400 bar System type – Stand-alone hydraulic unit with tank and three-phase motor 4. Main Function Industrial machine designed for: - Debarking logs of various diameters - Preparing wood for pallets, packaging, chipping, or primary processing - Peeling through toothed heads and hydraulic pressure The machine is located in Valencia, Spain, and is ready for loading and shipping worldwide. Lodpfx Aeycutcsbnjhd If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Ring debarker type VK26MX with centering infeed conveyor and driven out feed guide work. Electrical starter cabinet included. Ljdpjx Svx Hsfx Abnehd Min log diameters 10 cm Max log diameters 60 cm Min log length 2 meter Feeding speed 22 - 41 m/min

Condition: used, Nicholson A5/35” immediately available. Log diameter: 8-90 cm. Lhjdpfx Asxpvxxjbnsd

Condition: good (used), Full line, semiautomatic, finished material 40–160 mm Lodjx U Ealopfx Abnehd

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: Lhjdjtrd Hfjpfx Abned - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker

Condition: as good as new (ex-display), Year of construction: 2025, HÄWA / SWT Maschinenbau Debarking Machine – New -- ---Demonstration unit --- Immediately available - Made in Germany - Model H256 / 800 - Manufactured from a heavy welded steel construction - 4 pairs of main log drive wheels - 1 split, toothed pair of main log drive wheels - Frequency-controlled log drive - Milling arm made from a heavy steel construction - Milling head: working width 300mm, impact bars, impact knives, and guide ring - Milling head equipped with carbide inserts - Hydraulic lowering of the milling head - Frequency-controlled feed for milling head - Log drive wheels 800mm - Log diameter 0.2m – 1.0m - Log length 1.0m – 6.0m - Total connected load 35kW - With HBC radio remote control Lhjdpfx Abjxx Am Uonod

Condition: new, Year of construction: 2025, Haewa / SWT Maschinenbau Carriage constructed from heavy welded steel framework 4 pairs of log feed rollers Ljdecrp Akspfx Abnehd 1 split, toothed pair of log feed rollers Log feed drive with 2 speeds Hydraulics for ejector Milling arm constructed from heavy steel framework Milling head: working width 300mm, beater bars, flail blades, and guide ring Milling head equipped with carbide tools Hydraulic lowering of the milling head Carriage drive with frequency control, v = 0–60 m/min Type H 249 / 800 Log feed rollers 800mm diameter Log diameter 0.2m – 1.0m Log length 2.0m – 6.0m (longer on request) Total connected load 35kW With control panel

Condition: used, Söderhamns Rotary Debarker Ledpfxsxtc Afs Abnehd Cambio 85 - 66 - A Diameter: 10 - 66 cm Main motor: 30 kW

Condition: like new (used), Year of construction: 2018, HÄWA Debarker -Type H256 / 800 - Made from a heavy welded steel construction - 4 pairs of log drive wheels - 1 split, toothed pair of log drive wheels - Log drive frequency-controlled - Milling arm made from heavy steel construction - Milling head: working width 300mm, impact bars, impact knives, and runner ring - Milling head equipped with carbide tools - Hydraulic lowering of the milling head - Milling head feed frequency-controlled - Log drive wheels 800mm Lodsdwidwopfx Abnshd - Log diameter: 0.2m – 1.0m - Log length: 1.0m – 6.0m - Total connected load: 35kW - With HBC radio remote control - Immediately available - Year of manufacture: 2018