Lead/traction spindle lathe

Matra SM - 3000

Condition: good (used), functionality: fully functional, Used TOS SUI 50 - 1500 lathe with extensive accessories for sale Iijdpfx Afswu Dn Io Sek For sale: robust and precise TOS SUI 50 - 1500 lathe – ideal for workshops, metalworking, and ambitious hobbyists. 🔹 Distance between centers: 1500 mm 🔹 Swing over bed: 500 mm 🔹 Spindle speed: 14 – 2240 rpm 🔹 Spindle bore: 56 mm 🔹 Dimensions (LxWxH): 3000 x 1300 x 1500 mm 🔹 Weight: approx. 2.9 tons ✅ The machine is used, but in technically good condition and ready for immediate use. 📍 Location: Werdau 📅 Inspection possible – simply arrange an appointment! If you're interested, just get in touch – preferably by message or phone.

Condition: used, Year of construction: 1988, machine/vehicle number: 1743, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer Gula Speed CGS JKN 112Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Iodpfsh Axquex Af Soik Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1991, VECOPLAN VAZ 120/105-U Waste Crusher For shredding particleboard and solid wood waste, drive power 18.5 kW, throughput 1000 kg/h for chipboard waste, 350 kg/h for solid wood waste, screen diameter 25 mm, rotor diameter 235 mm (circle), width 1070 mm, 120 rpm, feed unit : Sectional steel construction , driven by hydraulic cylinders, in plastic guide rails, laterally with rollers, main drive E-motor with turbo coupling, V-belt drive, 2-stage helical gearbox, motor rated power 18.5 kW, rated current 36.5 A, 1455 rpm, 400 V, 50 Hz, Degree of protection IP 54, Type B 3, V-belt pulley Turbo clutch D 1 = 200 mm, V-belt pulley Drive D 2 = 200 mm, Number of V-belts Z = 3 pieces, V-belt Effective length LW = 1900 mm, centre distance ENOM = 635.84 mm, Door length L = 635.84 mm, impression depth EA = 23.35 mm, test force per V-belt F = 75?, Turbo coupling: hydrodynamic coupling, load-free starting of the electric motor, overload protection, hydraulic ic unit: Compact unit with 2 operating speeds, Iiedjt Dh T Dspfx Af Sjk drive power 1.0 / 1.4 kW, drive pressure max. up to 180 bar, extraction nozzle: minimum air velocity V = 28 m/s, inlet length 1200 mm, inlet width 1050 mm, waste shredder with universal rotor- dimensions in mm: approx. 6500 x 2700 x 3600, weight in kg: approx. 2300, Machine quality: fully operational after maintenance. year of construction: 1991

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg Iiodpfeflrg Tex Af Sjk

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant Ijdpowf Sfvofx Af Ssik For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, TECHNICAL DETAILS - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg]. Iiedpfx Ajuhbpljf Ssk

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots Iiodpfx Afjrqwbie Sjk - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 120 mm, total height: 1,820 mm, total width: 1,780 mm, total length: 1,400 mm, table width: 500 mm, table length: 900 mm, workpiece weight (max.): 190 kg, distance table to spindle center: 390 mm, Equipment: documentation/manual, Table surface (angled table): 900 x 500 mm Max. Workpiece weight: 190 kg Travel X: 600 mm Travel Y: 450 mm Travel Z: 380 mm Quill travel Z1: 120 mm Speed range: 40 - 2000 rpm Gear stages: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1560 kg including extensive standard accessories, e.g: Work area cladding Ijdpfx Aehu Rwfef Sjik 3-axis digital readout CONTUR Hydraulic tool clamp for vertical spindle Tool holder SK 40, DIN 69871A, tightening bolt DIN 69872, incl. hydraulic unit Monitored spindle protection 3 conventional handwheels Complete electrical equipment for three-phase current 400 V, 50 Hz Ball screws for X, Y and Z axes Vertical milling head Fixed angle table 900 x 500 mm clamping surface Swivel device for vertical milling head LED machine light Protective bellows for the vertical and horizontal guideways guideways Automatic central lubrication for the axis and ball screws Coolant system with pump Set (4 pcs.) of bearing elements Including tool holder package consisting of: 1 x collet chuck ER40 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Condition: used, total height: 1,600 mm, total length: 5,000 mm, total width: 1,600 mm, Empty weight: 3.190 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Removable bed - Swing over removable bed [mm]: 900 Iodpfx Ajwnitiof Soik - Type of digital readout: 2 assen - Control: Conventional - Transport dimensions: 5000mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 3190kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1974, turning diameter over bed slide: 480 mm, center width: 1,500 mm, Center Lathe Manufactured by Heidenreich & Harbeck Type Hanseat 480 Fully overhauled in 2012 Technical Specifications Manufactured by Heidenreich & Harbeck Type: Hanseat 480 Year of construction: 1974, fully overhauled in 2012 Control: Conventional Center distance: 1500 mm Turning diameter over bed: 480 mm Turning diameter over support: 295 mm Spindle speed: 20 – 2190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250, built-in - Faceplate D 400 Iodpswm D Ilsfx Af Ssik - 10 quick-change tool holders - 1 steady rest All information is provided without guarantee. A live demonstration is possible at any time in our exhibition hall.