Veneer press

Höfer HP 65 S

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit Fedpfx Aed Inktef Dspc - Fine trimming unit - scraper - buffing unit

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Fsdpfx Afowx Rrnj Dopc Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works.

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Fedpfx Asxya Rtjf Djpc Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Fpodpfx Aow Idc Rof Dsc Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), functionality: fully functional, Shelf press for veneering Cooper 3000×1300, water-heated Fedpoyctkmjfx Af Dopc

Condition: used, Year of construction: 2011, Type KDF 220 C Fpedpfx Asxc N Hvof Dec Year of manufacture: 2011 Units operated from the display Gluing unit Cross-cut saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-50 mm Feed speed: 10 m/min Total power: 9.5 kW Length: 4150 mm Weight: 1150 kg €19,990 including VAT, shown separately on the invoice

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and technical specifications: Gluing max. 8-55 mm Including rotating control panel Dual-motor HF joining unit Including replaceable, Teflon-coated rapid heating tank Including electronically controlled positioning of the pressure rollers Including pivoting double cross-cut saw unit Including flush trimming unit Including application-controlled bevel, radius, and corner rounding unit with nesting package Including radius scraper with nesting package Fsdpfew Nadgsx Af Depc Including flat scraper Including grooving unit Including buffing unit Including spray unit Location: Hesse Availability: Upon request !Sold on behalf of customers!

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Technical data Fpsdpfsfriztex Af Dsc 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers weight 865 kg L x W X H 280cm × 150cm × 150cm

Year of construction: 1995, condition: good (used), 3 drilling heads with 21 spindles each 1 horizontal 21 spindles 2 vertical 21 spindles pneumatic clamps Fpodpeih H Epefx Af Dsc

Condition: good (used), functionality: fully functional, SIMI Shelving Press 300x130 cm Fedpfx Afjx Ezr Es Dopc Specification: • condition – used, serviced and fitted with new seals • manufacturer – SIMI • shelves dimensions: 300 x 130 cm • max clearance between shelves: 460 mm • shelves are straight, clean, without dents or damage • 6 pistons, each 80 mm diameter • new seals on all pistons • pump motor: 1.5 kW • max pressure: 400 bar • automatic pressure compensation in case of pressure drop • glueing cycle timer • shelves prepared for water heating from central heating (top shelf is leaking) • original paintwork • weight approx. 4500 kg • overall dimensions: 380 x 155 x 225 cm (L x W x H) Additional information: • perfect, factory technical condition • displayed photos show the actual condition of the item for sale • possibility to switch on and test the device on site