Edge banding machine

Biesse Polymac Ergho 3

Condition: good (used), Year of construction: 2002, operating hours: 5,900 h, functionality: fully functional, machine/vehicle number: 74343, working width: 1,350 mm, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, Wide belt sander Bütfering Optimat SBC 313 Year of manufacture: 2002 Model: Optimat SBC 313/QCE/Classic - with 3 units (see attached photo for description) - sanding from above Working width: 1350 mm Ksdeqvl D Hopfx Af Sofa Abrasive belt width: 1370 mm Abrasive belt length: 2620 mm Cross belt width: 150 mm Cross belt length: 4700 mm For more detailed information, see the photos

Condition: good (used), overall weight: 5,000 kg, working width: 1,300 mm, plate width: 1,350 mm, Bürkle U140 Veneer Press Kfjdpfx Ajxn Um Esf Sja 4 intermediate plates Plate dimensions: 3050 x 1350 mm Working dimensions: 3000 x 1300 mm 8 hydraulic cylinders Max. surface pressure: 5 kp/cm2 Max. operating pressure: 348 bar Heating medium – hot water from central heating Cooling – cooling circuit with WILO pump, expansion tank, piping Weight approx. 5000 kg Plates and hydraulics in good technical condition

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine Manufacturer: Brandt Model: KDF 660 Kfodpoxl Ufvsfx Af Sja Year of manufacture: 2005 Max. edge thickness: approx. 12 mm Max. workpiece thickness: 60 mm Max. coil material thickness: 3 mm Equipped with: - Pre-milling unit - Coil magazine - Glue application unit - End trimming unit - Top/bottom flush and radius milling - Top/bottom radius milling with front/rear edge copying - Radius scraper - Buffing station Feed speed max. approx. 16 m/min. Connection: 400 V, 50 Hz, 3 Ph Total connected load: approx. 15 kW

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Dowel drilling machine Make Vitap Type Forma 63 H year 2000 with 3 units 2x bottom 1 x lateral with 21 spindles Kfsdjuf Dmuspfx Af Soa Pneumatic

Condition: reconditioned (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 869/9-302, Connected load 380V 21A Edge magazine gluing station 1906 printing unit 1914 Crosscut saw unit 1976 Milling unit rounding 1943 Kfodpoiamufefx Af Sea Rounding scraper 1927 Buffing unit 1944 Control panel top Suction nozzle D=100 mm operating instructions no exchange unit for flush milling

Condition: used, Year of construction: 2004, Used machine Kfjdpoxya Rtofx Af Soa Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW suction connection Ø 1x100 mm Compressed air connection 6 bar weight approx. 980 kg width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm workpiece width min. 60 mm feed rate 13 m/min edge thickness max. 5 mm, roll material 3 mm Edge magazine 1301 with DAZ 11 gluing station 1906 printing unit 1914 trimming unit 1976 Milling unit flush 1942 Milling unit radius R2 1943 Kodpfx Aeiw D Udsf Sofa scraper 1927 Buffing unit 1944

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: limited functionality, Machine was fully working condition in 2021. Then dismantled and stored in warehouse. LEFT side Kfedsxu H S Topfx Af Soa

Condition: good (used), pressing force: 95 t, cylinder diameter: 90 mm, plate width: 1,350 mm, Veneer Press Joos Type: HP 90 with 2 intermediate plates, stacking automaton, and lift table Pressing area: 2,550 x 1,350 mm Intermediate plates: 2 pcs. Pressing pressure: 95 t Piston diameter: 90 mm Specific pressing pressure: 2.75 kg/cm³ Number of cylinders: 4 Heating medium: hot water Total power: 1.3 kW Safety device: emergency stop rope Press dimensions: 3,000 x 1,530 x 2,200 mm Press weight: approx. 4 t Kfjdpsxnqq Hefx Af Sea Elkom heating plates in very good condition Scissor lift table The plates are stacked and thus unloaded automatically.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x1050x110 mm Weight 350 kg Total power requirement 1,5 kw Kedpfovz Er Ajx Af Sjfa