Single Edgebanders

SCM OLIMPIC K560

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 9 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit Fjdpfeyux Riox Afzjpf 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit - scraper Fedpfx Ajd Inktefzepf - buffing unit

Condition: ready for operation (used), Year of construction: 2019, This SCM Olimpic K560 edgebander was manufactured in 2019. It features a 7" touch screen display with Touch 7 electronic control, supports edging thickness from 0.4 to 3 mm, and handles panel thicknesses from 8 to 60 mm. The machine offers a feed speed of 12-14 m/min and includes a hot air edge banding system. Contact us for more information. • Machine Condition: Good condition • 7" touch screen display (16:9) with Touch 7 electronic control • Edging Thickness: 0.4 – 3 mm • Panel Thickness: 8 – 60 mm Fodsyabq Ajpfx Afzepf • Minimum Panel Length: 140 mm • Minimum Panel Width: 100 mm • Feed Speed: 12 – 14 m/min • Hot Air Edge Banding System

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Year of manufacture: 2016 Fsdpfx Afsyg H Aqezspf Touch control with color display Anti-adhesive liquid Pre-milling unit Corner rounding on 2 units Flat and radius scraper Automatic positioning control of milling units (top/bottom for corners and profile scraper) Polishing units Weight: 1,754 kg Machine length: 4.8 m

Condition: used, Year of construction: 2011, Type KDF 220 C Year of manufacture: 2011 Units operated from the display Gluing unit Cross-cut saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-50 mm Feed speed: 10 m/min Total power: 9.5 kW Length: 4150 mm Weight: 1150 kg €19,990 including VAT, shown separately on the invoice Fpodpfx Aoxc N Hvefzof

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, operating hours: 336 h, edge thickness (max.): 8 mm, total length: 4,764 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edge banding machine with only 336 operating hours & comprehensive accessories! TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control: Maestro Pro Edge Electrical Data Voltage: 400 Volt Frequency: 50 Hz Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Fsdpfx Afeydc Abozepf Edge Banding Machine Configuration: Flush trimming and scraper unit, radius: 1 mm Flush trimming and scraper unit, radius: 2 mm Spraying unit for edge finishing Spraying unit for delicate edges Surface scraper "RC-V" Brushing unit "SP-V" "SAVENERGY" kit "EASY SIZE" device Internal lighting for the enclosure and gluing area Ceramic lamp with infrared rays Electronic positioning of the pressure rollers Spare adhesive tank "SGP" with NC dosing system Additional adhesive tank "SGP" with NC dosing system Manual feed "Nesting" tracing rollers Diamond tools H=64 for pre-milling unit, 2 teeth Base

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Fpsdpfsxya Rtox Afzef Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Fodpfx Aswx Rrnofzjpf Heating-up time approx. 20 min. Price ex works.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: currently still in production Features and technical specifications: Edgebanding max. 8-55 mm Incl. swiveling control panel HF jointing unit with 2 motors Fsdpfxew Nadgo Afzjpf Incl. quick-heating, exchangeable, Teflon-coated glue pot Incl. electronic positioning of pressure rollers Incl. tilting double end-trim saw unit Incl. flush milling unit Incl. application-controlled chamfer, radius, and corner copying unit with nesting package Incl. radius scraper with nesting package Incl. surface scraper Incl. grooving unit Incl. buffing unit Incl. spraying unit Availability: short-term Location: Flörsheim

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles Fpsdpfxefrizto Afzef 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers weight 865 kg L x W X H 280cm × 150cm × 150cm