End milling machine

GRAULE AKF 4/250

Year of construction: 1999, condition: used, Cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg Hnodjywx D Nspfx Ah Eor

Condition: new, measuring length bis 5700 mm Tube length 6000 mm numbers of toolholders 7 Rohr Edelstahl dimensions 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: Hjdpefv Atlofx Ah Eenr This is just the stop system without roller conveyor!

Condition: used, for milling cutter diameter up to max.: 250 mm maximum milling cutter package height: 90 mm maximum profile height to be machined: 140 mm milling width up to: 350 mm milling depth: 80 mm spindle speed: 2800 rpm Hsdpfx Ajb Nwb Teh Eonr drive motor: 380 V, 2800 rpm, 2.2 kW approximate weight: 95 kg space requirement: 1050 x 700 x 530 mm

Year of construction: 1986, condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pneumatic material clamping devices with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg Hodpfxog A Rgfj Ah Ejnr

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional solution for crosscuts, miter cuts, and bevel cuts The ZS 200 N is ideally suited for crosscuts, miter cuts, and bevel cuts. Materials such as wood, PVC, and aluminum profiles can be processed cleanly and precisely. The saw unit runs on a hardened guide arm and can be swiveled horizontally on both sides for miter cuts. The "N" stands for "Neigung" (inclination) and indicates that the saw unit can also be tilted vertically on the side – thus, bevel cuts can also be carried out easily. Fact Check ZS 200 N Crosscut and miter saw with a maximum cutting height of 200 mm Stable cast iron construction Hnjdpfx Ash Nu Iuoh Ejr Precise ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Fast miter adjustment up to 65° horizontally and up to 60° vertically Adjustable stops and lower saw blade guard Can be connected to a dust extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical Details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45°-90°-25° Miter range vertical 60°-90°-30° Saw blade diameter 520 mm Weight 310 kg Scope of delivery: Miter and bevel saw ZS 200 N Machine stand Machine can be tilted on both sides from the front Hydraulic feed brake Circular saw blade HM Z 60 negative Operating tool and hand crank

Condition: good (used), Year of construction: 1997, Double miter saw RAPID DGS 200 Year of manufacture 1997 Drive: 2 x 2.2 kW, 400 V Swiveling range, manual: 45° to 90° Saw blade: 420 mm Ø Saw feed: pneumatic Cutting length: 4000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders Hedpfx Aohctt Eeh Ejnr Length adjustment: manual Length display: digital Air pressure: 7 bar Profile support: fixed on the outside, movable in the center Dimensions (L/W/H): 5200/1200/1500 mm Weight: 800 kg

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm cutting area at 45°: 90 x 65 mm rotations of disk: 2000 rpm engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm Hnjdpob N Eicefx Ah Esr

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) Hnedpfx Ajfhbuyjh Esr - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: excellent (used), Year of construction: 2017, Very good technical condition. Ready for operation. The machine is designed for cutting aluminum and PVC. E 580 control system. Disc diameter: 500 mm. Cutting according to external dimensions, without correction. Automatic lowering and raising of disc guards. Hodpfxjzgu Efj Ah Eonr Pneumatic adjustment of the cutting angle from 45 to 90 degrees. Printer.

Year of construction: 1996, condition: used, Unfolding width: max. 200 mm Unfolding depth: 40 mm Profile height: max. 100 mm Vise jaw opening: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by pressing the foot switch Profile clamping by infinitely adjustable vise. Hjdpoq Awg Eefx Ah Esnr