Double mitre saw

Rapid DGS 200

Condition: new, 0 4000,5000 mm Working height 120 mm Todpfjxmk Amox Adqja 0 ja

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 Todecxxx Rspfx Adqsa :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: used, Year of construction: 2003, used, good condition Machine cleaned, lubricated, partially overhauled. Tsdsyclxpspfx Adqja Various wear parts replaced. Test run with settings. Manufacturer: Rapid Model: DGS 200 Year of manufacture: 2003 Machine no.: 404 CE type-tested Motors: 2 x 2.2 kW Cutting width: 4000 mm Cutting depth: 130 x 140 - 100 x 230 - 60 x 270 mm Cutting height max.: 280 x 50 mm Max. blade diameter: 420 mm Manual tilt: 45° Linear feed: pneumatic Digital displays for cutting length 4x pneumatic workpiece clamping - 2x horizontal, 2x vertical Cylinders: 2 horizontal, 2 vertical Space requirement approx. 5100 mm x 1180 mm x 1280 mm Weight approx. 800 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t Todpfx Adsfn Aqmeqsa dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Tedpfsuiwqhsx Adqsa Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Year of construction: 2004, condition: good (used), machine/vehicle number: 2004-3-11A, - Feed of the milling head manually - Work table height adjustable via handwheel - Horizontal and vertical material clamping - Milling cutter diameter up to 250 mm - Max. milling height 150 mm Tjdpfxef E Hige Adqja - Max. milling depth 80 mm - Max. milling length 305 mm - Angle-adjustable stop, left and right 20 - 90° - Milling spindle speed 4500 rpm - Drive 400 V, 3.2 kW - Compressed air connection 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table stand - Space required approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Year of construction: 1986, condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm - at 90° round 130 mm - square 120 mm Tedpog A Rgfefx Adqja - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pneumatic material clamping devices with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional solution for crosscuts, miter cuts, and bevel cuts The ZS 200 N is ideally suited for crosscuts, miter cuts, and bevel cuts. Materials such as wood, PVC, and aluminum profiles can be processed cleanly and precisely. The saw unit runs on a hardened guide arm and can be swiveled horizontally on both sides for miter cuts. The "N" stands for "Neigung" (inclination) and indicates that the saw unit can also be tilted vertically on the side – thus, bevel cuts can also be carried out easily. Todpfxoh Nu Iuo Adqsa Fact Check ZS 200 N Crosscut and miter saw with a maximum cutting height of 200 mm Stable cast iron construction Precise ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Fast miter adjustment up to 65° horizontally and up to 60° vertically Adjustable stops and lower saw blade guard Can be connected to a dust extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical Details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45°-90°-25° Miter range vertical 60°-90°-30° Saw blade diameter 520 mm Weight 310 kg Scope of delivery: Miter and bevel saw ZS 200 N Machine stand Machine can be tilted on both sides from the front Hydraulic feed brake Circular saw blade HM Z 60 negative Operating tool and hand crank

Condition: used, System D8 brand painting chain, 94.50 linear meters, complete with towing, tracks and chain. Tsdom D Hcfepfx Adqsa

Condition: used, material width 250 mm material thickness 2 - 4 mm no. of straightening rolls 7 run-in height 1250 mm mm strip intake tiltable, positiv 25 ° strip intake tiltable, negativ 30 ° total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. m Leveler was dismantled, checked and then repainted Todpfsgbl Aaex Adqsa