Tool Room Milling Machine - Universal

DECKEL FP 1

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual Ncjdjy Enwujpfx Ah Nor

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Ncodpfx Ajx Ivy Noh Ner Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: used, Deckel milling machine FP1 with 3-axis digital readout, 380V, 120–1900 rpm. Travel distance X-axis: 300 mm, Y-axis: 150 mm, Z-axis: 340 mm. Tool holder: MK 4 with draw thread S 20 x 2. Milling head type: Vertical milling head. Table type: Fixed table. Table clamping area: 600 x 210 mm. T-slot size: 12 mm. Feed X-axis: 290 mm, Y-axis: 150 mm, Z-axis: 330 mm. Weight: 700 kg. Deckel FP1 milling machine. Nsdpfx Asy Ddd Uoh Necr

Condition: ready for operation (used), Deckel FP1 in good used condition. Recently checked Heidenhain digital readout. Nsdpsy D Uq Sjfx Ah Nocr Infinitely variable feed and traverse on X and Z axes. Universal milling table. Tool holder SK40 S20x2 Year of manufacture: 1978. Can be tested under power. Shipping possible.

Condition: excellent (used), Weiler Primus VC Precision Centre Lathe Equipped with 3-axis HEIDENHAIN digital readout (latest generation) With VC drive for stepless speed adjustment and CE-compliant, in virtually as-new geometric condition Technical Data: Year of manufacture: 1999 Machine No. 208 Centre height: 140 mm Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4,000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Short taper spindle nose DIN 55027 size 5 with bayonet locking Tailstock: MT 3 Quill stroke: 40 mm Longitudinal feed: 0.02 to 0.63 mm/rev Cross feed: 0.005 to 0.2 mm/rev Metric thread pitches: 0.25 to 8 mm Module pitches: 0.2 – 4 mm (19 pitches) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Accessories and Equipment: - 3-Axis HEIDENHAIN digital readout (latest generation) - Display for spindle speed - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post, size “A” - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard Ncedpfeyglk Hsx Ah Njr - Simple bed stop - Switchable spindle brake - Operating manual - Machine lamp The machine comes from a vocational school and is in exceptionally top condition. Thanks to its safety features and renowned WEILER precision, this lathe is ideal for training as well as tool and machine construction. Note to all private buyers: The price of the machine is well into the five-digit range.

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, Deckel FP1 FPS retrofitted tool milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a training department. Adjustable tilting table, SK 40 spindle taper. Accessories include various collets and arbor holders. In good, ready-to-use condition. Test run under power can be arranged by appointment. Ncodpfjy Dz T Tsx Ah Ner

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 Nodpopmrpxefx Ah Nocr 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 ID: M100000409

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; Nedelkgvbspfx Ah Nocr table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: used, Universal tool milling machine with active digital display DECKEL Type FP 1 Universal milling machine Machine No. 2102 - 3351 Year of manufacture: 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN Type TNC 113 - Infinitely variable feed via servomotor in X, Y, and Z axis - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on the vertical milling head: 60 mm - Vertical milling head can swivel and extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated into machine base - Free-standing control cabinet - Original chip tray for placing on machine base Ncodpfsyxy Swjx Ah Njr - Operating manual, electrical diagram, spare parts list available in PDF format Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Year of construction: 1980, condition: excellent (used), Deckel FP1 milling machine in very clean condition. Specifications: - X axis 300mm - Y axis 160mm - Z-axis 340mm - ISO 40 intake - speed 40-2000rpm - dimensions: 1200 x 1100 x 1800 mm - weight: approx. 800 kg Accessories: - Heidenhain TNC 113 digital on 3 axes - Tilting table - Variable feeding X and Z axis - Cooling Nsdpfx Aekuynueh Njcr

Condition: used, Year of construction: 2003, x-travel:760 mm y-travel:290 mm z-travel:370 mm turning speeds:60 - 4200 U/min table::750 x 230 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,13 mm/U feed range:19 - 890 (x) mm/min spindle cone:SK 30 column arm:171 - 476 mm total power requirement:2,4 kVA weight of the machine ca.:0,95 t Ncedpst U Rm Uefx Ah Ner dimensions of the machine ca.:2,05 x 1,63 x 2,07 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Year of construction: 1980, condition: good (used), Lid FP1 active milling machine with 3 axis HEIDENHAIN digital display, angle table. SK 40 spindle carrier. Good operational condition upon request under current demonstration ready. Nedpjd Id N Rofx Ah Nocr

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Njdpfx Asq A Icqoh Necr

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm total power requirement:18 kW Njdpodmbrxsfx Ah Nocr weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: good (used), Year of construction: 1988, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Noderk Aaaopfx Ah Njcr