Gearbox pillar drilling machine

CORDIA T 18

Condition: used, Year of construction: 1969, turning diameter over bed 500-600 mm Gedpfx Aovdx I Ajgljkd turning length 2800 mm bore diameter 130 mm weight of the machine ca. 5,25 t required space / m

Condition: excellent (used), turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, turning diameter over bed slide: 870 mm, Geminis lathe model GE 870 with 4000mm between centers, swing over bed 870mm, swing over cross slide 580mm, swing over gap 1100mm, gap length 340mm, speeds from 13-1000rpm, spindle bore diameter 84mm, equipped with a 3-jaw chuck diameter 315mm, independent 4-jaw chuck diameter 800mm, fixed steady rest, the lathe is generally in very good condition. Godpfx Agjy Swmrelokd

Condition: used, Year of construction: 1967, turning diameter over bed 0560 mm Gkedpfx Agow H Di Aelsd turning diameter over slide rest 300 mm turning length 1250 mm spindle bore 65 mm spindle turning speed range 12- 1150 U/min total power requirement 5 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With multifix holder, chuck and turning center.

Condition: used, Year of construction: 1967, Center height: 300 mm Center width: 1000 mm Swing diameter: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Tailstock taper: 5 MK Gjdpovzn E Sefx Aglokd Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/transverse 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space required: 2900 x 1450 x 1750 mm

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Tent length: 1500 mm Spindle speeds: 16 2000 rpm Spindle bore: 55 mm Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Good general condition. Gjdpfxovkuauo Aglskd For further information see data sheets.

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch Gkedpsfg U Tpofx Agled - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: used, Lathe, taken directly from the workshop. In good working order. Price is negotiable. Gkedpfx Agszgak Tsled Comes with several accessories.

Condition: used, Year of construction: 1953, You can find additional images, data, and detailed information in the PDF notes. Should you have any further questions or require more information, please do not hesitate to contact us at any time. We are at your disposal. Gksdpfx Asx R Tnvsglod

Condition: used, Year of construction: 1965, turning diameter over bed 1000 mm turning diameter over slide rest 760 mm turning length 5000 mm spindle bore 82 mm turning speeds 3,55-710 U/min faceplate 1000 mm 3-jaw chuck 500 mm steady 2 total power requirement 22 kW weight of the machine ca. 10 t dimensions of the machine ca. 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Gjdoyquluopfx Agljkd Your Markus Hirsch Team

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: X1T132/23, turning diameter over cross slide: 350 mm, turning length: 650 mm, turning diameter: 350 mm, spindle bore: 42 mm, WOHLENBERG V 1000 Lead and Feed Screw Lathe (Universal Lathe) 3000 mm, year 1985 3-axis digital readout from Heidenhain Feed on top slide Coolant system Gedoylbldjpfx Aglekd Swing over bed: 1000 mm Swing over cross slide: 760 mm Turning length: 3000 mm Spindle speeds: 4.5 - 900 rpm Centre height over flat bed: 500 mm Workpiece weight between centers: max. 5000 kg Workpiece weight in steady rests: max. 7100 kg Bed width: 560 mm Spindle bore: 104 mm Voltage/Frequency: 380/50 V/Hz Total power requirement: 32 kW Dimensions: 5520 mm x 2200 mm x 1775 mm Machine weight approx. 9 t Control: conventional