Center lathe

Weipert WEZ

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Djdpfxsy Sf Aze Akcsku Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: not inspected (used), Please see technical details on photo. Dsdohvzxzjpfx Akcsku

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Dkedpfxjxmd Uvj Akcju Type: T 11 Year of construction: 1970 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Swing over bed 1,300mm, over cross slide 1.000mm, swing in gap 2,100mm, center distansen 1,500mm, 2,350mm with open bed. Spindle bore 128mm, 450 Rpm, 50 Kw, Chuck 800mm, 4-jaw plate 900mm. Fagor CNC, weight ca 12.000kg Dkedsxqp I Nspfx Akcju

Condition: used, Brand: GEMINIS Model: GHT4 G2 720 x 3000 Cnc: FAGOR 8055 Distance between points 3,000 mm Diameter over bed 720 mm Diameter over carriage 470 mm Bed width 550 mm Rapid traverse X axis 8 m/ min Rapid traverse Z axis 8 m/ min Dsdpfx Akjy R Evxjcjku Spindle speeds 0-1600 Number of automatic head ranges 2 Main motor power 20 kW Spindle nose type DIN- 55027-11 MULTIFIX quick change tool holder Quill travel 104 mm Tailstock quill diameter 100 mm Tailstock quill traverse 200 mm Quill tailstock MORSE 6

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Djdpfxswd D Ito Akceku

Condition: excellent (used), Year of construction: 1983, - Turning diameter over bed [mm]: - 1000 - Turning diameter over support [mm]: - 630 - Turning diameter in the bridge recess [mm]: - 1230 - Spindle bore [mm]: - 120 - Center distance [mm]: - 2000 - Rotation speed range [rpm]: - 5 ÷ 500 - Maximum workpiece weight in the chuck: 1300 kg - Machine weight: 10000 kg Dkedpfsytnt Dsx Akcou

Condition: good (used), Year of construction: 1996, Manufacturer: Tacchi Model: HD 1450 CNC STI Year of manufacture: 1996 Control: NUM Dkedey Ny I Tspfx Akcsu With accessories. In excellent condition. Technical specifications: Swing diameter over bed: 1,450 mm Swing diameter over cross slide: 1,000 mm Chuck diameter: 1,200 mm Maximum turning length: 4,000 mm Spindle bore: 150 mm Spindle speed: 560 rpm Capsule holder Machine weight: approx. 15 tons

Condition: used, turning diameter over cross slide: 390 mm, spindle bore: 82 mm, turning diameter over bed slide: 650 mm, overall weight: 3,000 kg, spindle mount: MK 5, Conventional Lathe Brand: Geminis Model: GE 650 Power: 12.5Hp Distance between centers: 2,000mm Maximum swing over bed: 650mm Maximum swing over gap: 820mm Maximum swing over carriage: 390mm Gap length: 310mm Spindle bore: 82mm Number of speeds: 18 (16-1250) Dksdpfjyc Rucox Akcou Carriage width: 620mm Tailstock: Morse taper 5 Includes: - 320mm 3-jaw chuck with sets of internal, external, and soft jaws - Conventional tool post + quick-change tool post 140x140mm (2 holders) - Closed steady rest 320mm - Closed steady rest 180mm - Open follow rest - Various gears for different thread pitches Weight: 3,000kg

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 660 mm, turning diameter over bed slide: 900 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, overall weight: 7,000 kg, Poreba TPK 90A1/2M Chuck 800 mm 2000mm between Centres Djdpfx Akswbd Dvscsku Swing over bed 900 mm Swing over saddle 660 mm Spindle Speed 710 rpm Weight 7000 kg approx.