Pillar drilling machine

ALZMETALL AX 2

Condition: good (used), DRILLING CAPACITY STEEL E335 (ST 60) [MM]: 14 TAPPING PERFORMANCE STEEL E335 (ST 60) [MM]: M 14 SPINDLE, SHORT: MT 2 DISTANCE SPINDLE TO COLUMN [MM]: 250 TABLE CLAMPING AREA [MM]: 370 x 300 DISTANCE SPINDLE - TABLE MIN./MAX. [MM]: 125 / 455 COLUMN DIAMETER [MM]: 90 Iaodpfxey D Ebns Af Uot Z-TRAVEL OF SPINDLE [MM]: 100 FEED: manual POWER [KW]: 0.6 / 0.95 POWER 2 [RPM]: 0.6 / 0.95 MOTOR 1 [RPM]: 750 / 1500 MOTOR 2 [RPM]: 750 / 1500 SPINDLE RPM RANGE | OPTION 1 [RPM]: 125 – 2,400 SPINDLE RPM RANGE | OPTION 2 [RPM]: 225 – 4,300

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm with rear fence Iasdpoq Rb Irjfx Af Uot

Condition: good (used), Year of construction: 1992, Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Alzmetall, Pillar drilling machine type AX2 S -Spindle mount: MK2 -Motor: 0.37 / 0.55 kW -Speed adjustment: stepless -Speeds: 450 - 4300 rpm -Table size: 250 x 250 mm -Travel distance: 560 mm -Spindle stroke: 90 mm -Protrusion: 250 mm -Column Ø: 90 mm -Dimensions: 720/540/H1650 mm Iedpfx Afeyv Ahvj Ueat -Weight: 145 kg

Condition: excellent (used), Year of construction: 1999, Drilling capacity (steel): 18mm Drilling capacity (cast): 23mm Thread cutting (steel): M14mm Iaedpjkytxzefx Af Uot Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Condition: good (used), drilling capacity: ca. 13 mm spindle taper: B 16 MK throat: 250 mm Iedpfjd In Sfjx Af Uoat table size: 220 x 325 mm spindle turning speed range: 350 - 1500 u. 750 - 3000 rpm engine: 380 V, 0,3/0,4 kW space needed: 680 x 400 x 1670 mm

Condition: used, Year of construction: 1986, Technical details: bore capacity in steel (diameter): 18 mm throat: 250 mm bore stroke: 100 mm drill capacity in cast iron: Ø 23 mm metrical thread cutting: ST60: M10 / GG20: M 14 M spindle taper MT: MK 2 spindle speed:: 400 - 630 - 1000 - 1600 - 2500 U/min feed: manuell mm/U Iasdpfx Aswiwwfof Ujt Distance spindle/table max.: 75 / 605 mm table clamping surface:: 250 x 250 mm column diameter: Ø 90 mm total power requirement: 0,55 kW weight of the machine ca.: ca. 170 kg dimension machine xH: 0,4 x 0,8 x 1,8 m

Condition: excellent (used), Year of construction: 1985, Column Drilling Machine ALZMETALL AX2 Ijdsxu H T Dopfx Af Ujat Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 R5247921 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Condition: good (used), Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. Iasdpfx Aor Ngp Uef Uot -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-23, empty load weight: 541 kg, maximum load weight: 2,159 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 1,840 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 406 184 2700 2 NEW VEHICLE Internal dimensions: 406 cm x 184 cm Side wall height: 35 cm Loading platform height: 68 cm Gross weight: 2,700 kg Payload: 2,149 kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1,350 kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame 35 cm high aluminium profile sidewalls with tension lock All sidewalls fold down and are removable 15 mm thick, non-slip, robust phenolic plywood floor Automatic jockey wheel with 400 kg nose weight rating 8 noise-suppressing lashing rings, each with 800 kg tensile force Isdpfx Aeghpbgef Usat Reinforced 13" C-type tyres with steel valves M+S tyres Net/rope hooks on frame 13-pin plug LED position lights at the front Rear lights with reversing light, fog light and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026: - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without sidewalls (discount) - Black Edition (powder-coated sidewalls and rims in black) - Integrated loading ramps 2,800 kg - Steel plate on loading floor - Complete LED lighting - Anti-theft device - Fine-mesh or coarse-mesh net - H-frame - Mesh sides in various heights, also available closed - 30 cm extension sidewalls with tension lock - Flat tarpaulin with or without bows - High tarpaulin 180 cm or 200 cm - Foldable crank rear supports Further accessories on request! Plus shipping to Gera and registration documents: €200 net Images are for illustration purposes only and may show optional accessories subject to extra charge. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and ready for immediate collection. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repair, including for caravans. Large selection of rental trailers. In addition, we offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or stop by directly.

Condition: new, Year of construction: 2026, The very efficient Cormak 32 column drill is an ideal solution for professional workshops and small-scale production. Equipped with a 1500W two-speed motor with a rotation direction switch for right and left. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. Additionally, the Cormak 32 drill is equipped with a gravity cooling system. The set includes a 150 mm vice and a drill chuck. Technical data Maximum drilling diameter 32 mm Grip capacity 16 mm Spindle to column distance 254 mm Maximum spindle stroke 120 mm MK4 spindle mount Maximum distance of the table from the spindle 595 mm The distance between the pin and the column is 260 mm Maximum distance of the base from the spindle holder 1075 mm Table dimensions 475x425 mm Column diameter 92 mm Motor power 1.5 kW 400V power supply Gravity cooling system Overall dimensions 1670 x 760 x 475 mm Net weight 144 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 120 200 250 360 400 450 950 1280 1520 1840 2440 3480 700 min-1 60 100 120 180 200 220 470 640 760 920 1120 1740 Standard equipment Iedpfx Asridpwef Ujat 1500W two-speed motor Left and right rotations DTR in Polish CE declaration Gravity cooling system Optional equipment feeder