Used Wire EDMs with x-travel of 500-699mm for sale (71)

Condition: defective spare-parts repository (used), Year of construction: 2000, Functionality: limited functionality, input frequency: 50 Hz, For sale is a defective EDM machine that was taken out of service due to the following errors: Dielectric temperature out of tolerance Short circuit limit reached The machine must be dismantled and picked up by the customer. This sale is without warranty. Celir Uev Uqgrezkorb If you are interested or have any further questions, please contact us.

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, GF AgieCharmilles Classic V3 Year of manufacture 2008 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Crslir Uev Hbygozksb Achieveable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for comfortable Setting up AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has already been cleaned, overhauled and tested by us. We would be happy to carry out an individual test cut for you. You receive a 6-month warranty on all machine parts. We would also be happy to offer you commissioning and training

Condition: ready for operation (used), Year of construction: 2004, operating hours: 35,300 h, Functionality: fully functional, A G I E (Switzerland) CNC-controlled wire EDM machine Type AGIECUT PROGRESS V 3 Year of manufacture 2004 EDM hours: 35,200 hours Celiev Tp Daor Uzkorb Travel (X/Y/Z) 500 x 350 x 426 mm Max. part size for clamping (X/Y/Z) 1,050 x 650 x 420 mm Max. workpiece weight (with/without bath) 400 / 800 kg Taper +/- 30°, 100 mm U/V axis travel +/- 70 mm Available wire diameters 0.20 - 0.33 mm Best achievable surface finish Ra 0.3 µm Max. cutting capacity 500 mm²/min Machine dimensions (mm) 1,940 x 2,300 x 2600 mm Separate dielectric tank Including cooling unit The machine can be inspected under power. It currently has no defects and is still being manufactured.

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: ATH ADV 3 with C AXIS, workpiece weight (max.): 2,000 kg, input frequency: 50 Hz, positioning accuracy: 0.005 mm, Description AGIE ADVANCE 4 Travel/ races (X/Y/Z) 550 x 350 x 400 mm Max. Workpiece dimensions 920 x 750 x 370 mm Surface support 870 x 550 mm Max. workpiece weight Workpiece weight (without bath) 2000 kg Max. electrode weight Electrode weight 80 kg Table/quill distance min. 215mm Max table/keel distance. 615mm Quill stroke 400 C-axis Integrated, 0 - 55 rpm Generator power 60 A Dielectric integrated Details • X axis:550 mm • Y axis:350 mm • Z axis:400 mm • C axis: Yes • Max workpiece length: 920 mm • Max workpiece width:750 mm • Max workpiece height: 370 mm • Max workpiece weight: 2000 kg Conditions and size • Status:Visible • Condition: Good • Length:2050mm Crslisv Rftler Uzkjb • Width:1800mm • Height:2868 mm • Weight:4200 kg Make offer / Make offer

Condition: used, Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 5920633110015, workpiece weight (max.): 1,600 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, total height: 450 mm, workpiece height (max.): 450 mm, type of input current: three-phase, table width: 750 mm, table length: 600 mm, table load: 1,600 kg, worktable length: 750 mm, working range: 600 mm, worktable width: 600 mm, positioning accuracy: 0.05 mm, For sale Agie Chermilles Form 300 sinker EDM machine from 2015. The machine is functional and ready to use. The machine has dimensions of 2265 x 2110 x 2780 mm and weighs 4800 kg. Crelijv Sty Asr Uzksb Working ranges 600 x 400 x 450 mm. Work table size 750 x 600 mm. Maximum workpiece weight 1600 kg. Maximum electrode weight 50 kg.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, type of input current: AC, table width: 840 mm, overall weight: 3,500 kg, table length: 640 mm, positioning accuracy: 0.003 mm, ### Price heavily reduced ### This machine is very well maintained and in very good condition. The machine is still in production. You can view and test this machine with power on. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV 2400R MV-R Series – Power for Precision Production hours: approx. 8,000 hours Application type: EDM / wire cutting Machine type: Wire EDM machine Technical specifications - Mitsubishi MV 2400R X-axis movement: 600 mm Y-axis movement: 400 mm Z-axis movement: 310 mm Travel (X / Y / Z) in mm: 600 / 400 / 310 Travel (U / V) in mm: 150 / 150 (+/- 75) Cjlir Ujvq Rh Uezkjrb Max. workpiece dimensions (W x D x H) in mm: 1050 x 820 x 305 Max. workpiece weight in kg: 1500 Table dimensions (W x D) in mm: 840 x 640 Overall dimensions (W x D x H) in mm: 2687 x 3030 x 2150 Machine weight in kg: 3500 Price reduced.

Condition: ready for operation (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 396.900.217.2345, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 2,020 mm, total width: 2,790 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, table width: 950 mm, table length: 630 mm, tank capacity: 1,000 l, travel speed (max.): 300 mm/min, Equipment: cooling unit, A really reliable machine with extreme precision. Crelir Uev Um I Sozksb

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, AGIECUT Excellence 3 Year of construction 2003 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE IPG generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Crslerr Uzwsir Uzkob Net weight: 4500 kg The machine is cleaned, overhauled and thoroughly tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transportation, commissioning, cooler

Condition: good (used), Year of construction: 2000, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 220 mm, total length: 280 mm, total width: 240 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, Agie Excellence 3, year 2000. Working machine on display at our Semsales facility in Switzerland. Machine available immediately. Cslir Uzsv Rgiheksrb

Condition: used, Year of construction: 2013, Max. Workpiece Dimensions - 960 x 670 x 245 mm X-Y-Z Axis Travel - 500 × 350 × 250 mm Taper Angle (at 120 mm thickness) - ±15° Wire Diameter - Ø 0.15 – Ø 0.3 mm Crslirjwbp R Us Uzkjb Machine Weight (incl. Power Supply) - 2,900 kg Machine Dimensions - 2,300 × 2,950 × 2,040 mm (with accessories) Distance from Floor to Table Top - 930 mm Max. Wire Feed Speed - 420 mm/sec Wire Tension - 3 – 23 N Air Flow Requirement - 0.5 MPa, 30 NL/min Total Power Input 3 phase - 50/60 Hz, 11 kVA Installation Space (W×D) - 3,000 × 3,300 mm Wire Bobbin Weight - 8 kg Machining Method - Flushing / Submerged Max. Workpiece Weight - 850 kg U-V Axis Travel - 80 × 80 mm Work Tank Dimensions (W×D) - 990 × 750 mm

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 1,050 mm, total length: 710 mm, workpiece height (max.): 340 mm, workpiece width (max.): 570 mm, workpiece length (max.): 800 mm, type of input current: three-phase, overall weight: 1,000 kg, input voltage: 200 V, FOR SALE wireframe from 2014 in very good condition Cslir Ujv Sri Nszkorb

Condition: used, Year of construction: 2010, Wire erosion / EDM Travel distance X: 500 mm Travel distanceY :350 mm Travel distance z: 250 mm Crelir Uzsvtfpreksb max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with AWF ( Automatic Wire Feeding ) submerged

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm Colevvl Uaeir Uzksrb U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Year of construction: 2005, Condition: refurbished (used), AGIECUT Progress 3 Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Celir Uogzv Scozksrb Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG high performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. We are also happy to offer you commissioning and training

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Only 15,100 hours of work. Cslir Usv Rbxwjzksrb Machine fully serviced and working. Viewable at our Semsales premises in Switzerland.

Condition: good (used), Year of construction: 2002, operating hours: 49,312 h, X Axis:550 mm Y Axis:370 mm Z Axis:310 mm Max. workpiece length : 700 mm Max. workpiece width :600 mm Celiovuv N Sjr Uzkjrb Max. workpiece height: 250 mm Max. workpiece weight:1000 kg CNC Type:FANUC 180 iS-W

Condition: repair required (used), Year of construction: 2004, Functionality: limited functionality, workpiece weight (max.): 800 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, Equipment: fridge, We are selling a Sodick wire erosion machine. It was purchased new in 2004 and was in operation until 2023. The machine needs to be replaced with a screen, seals,... a major service is required. The machine is located in the Sodick demo center near Zagreb, we can provide all support: start-up of the line, installation, transport and official service. Celir Uzsv Hw Dhekorb For more information, we are available:

Year of construction: 1997, Condition: good (used), control Mitsubishi CNC Celirsdv I A Ie Uzkjrb travel X/Y/Z 500/350/300 mm max. workpiece weight 800 kg table size 780x630 mm

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG Coliroul Uwle Uzkorb - Automatic wire threading - Manuals

Condition: reconditioned (used), Year of construction: 2021, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, GF Machining Solutions CUT P550 Pro Year of manufacture 2021 Uniqua control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Cjlirovyp Ufs Uzkorb Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 400 mm²/min Best surface: Ra 0.08 µm Available wire diameters: 0.15 to 0.33 mm Incl. wire cutter Incl. 3D probe Dimensions of the complete system: 2600 x 2640 x 2340 mm Total weight of the system: 3300 kg The machine is already in our warehouse and will be cleaned, serviced and thoroughly tested after the order has been received. We would be happy to offer you an individual test cut on the machine. You receive a 6-month warranty on the machine. We would be happy to offer you commissioning of the machine.

Condition: used, TECHNICAL DETAILS - Table dimensions : 900 x 600 [mm] - Dielectric capacity : 1200 [l] TRAVELS - Travels on X/Y/Z axes : 550 x 350 x 400 [mm] - Travels on U/V axes : 550 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 3 [m/min] - Rapid traverses rates (U/V) : 3 [m/min] - Max. taper : +/- 30 [°/mm] PART - Max. part dimensions : 1200 x 700 x 400 [mm] - Max. part weight : 1500 [kg] WIRE GUIDE - Wire diameter : 0.15 - 0.33 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 12 [kVA] WEIGHT & DIMENSIONS Crolir Ujuhca Sszkjb - Machine floor space : 2600 x 2600 [mm] - Machine height : 2340 [mm] - Machine weight : 2850 [kg] EQUIPMENT - CNC : CHARMILLES - Screen : LCD 15'' TFT - Remote control

Condition: excellent (used), Year of construction: 2003, Machine with water tank and automatic wire threader, cooling unit and software. Colisu Thd Hor Uzksrb XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters etc.)

Year of construction: 1999, Condition: good (used), Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit Croliod Ra Adsr Uzkjb

Year of construction: 2008, Condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm Cjlism Amf Djr Uzkerb travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler

Year of construction: 2006, Condition: refurbished (used), AGIECUT Challenge 3 eCut Year of construction 2006 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Crjlirogfm Rrj Uzkob Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE generator with eCut technologies for faster and more efficient processing Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and thoroughly tested by us after receipt of the order. We then put the machine into operation on your premises. You receive a 6-month warranty on the machine. We are happy to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transportation