Wire erosion machine x-travel 500-699mm used for sale
15
Hello,
for sale is a good maintained and used wire eroding machine of the brand Fanuc of the type Robocut Alpha 1iC from year of manufacture 2005.
The wire eroding machine has only ca.21000 operating hours!!!
Technical data:
B30cc7zcbf
Travel: X550 x Y370 x Z310 mm
Workpiece size Max.X: 820 mm
Workpiece size Max.Y: 730 mm
Workpiece size Max.Z: 300 mm
Workpiece weight: max.1000 kg
With automatic wire threading (AWF).
U- / V- axis: +/- 60 mm x +/- 60 mm
The EDM machine cuts in a water bath .
Autom...
9
table length 910 mm
table width 660 mm
ampere 30 A
Control MAKINO MGW-S6
0 910 x 660 x 400 mm
workpiece weight max. 1200 kg
wire dia. 0,1/0,15/0,2/0,25/0,3 mm
x-axis 650 mm
y-axis 400 mm
z-axis 420 mm
U-axis +/- 101 mm
V-axis +/- 101 mm
tank capacity dielectric 990 l
total power requirement 18,00 kW
weight of the machine ca. 6,00 t
dimensions of the machine ca. 3,20 x 4,50 x H2,80 m
Submerged machining specification; Split precision guide system;
Square shape table; Automatic water level set...
14
General Data
Measurements width 3550 mm
Measurements depth 2915 mm
Measurements height 2320 mm
Machine weight 2600 kg
Control Unit
Brand FANUC 18I-W
Main Drive
Number of axis 5
Movement
X-Axis Movement 520 mm
X-Axis Rapid Traverse 900 mm/min
Y-Axis Movement 370 mm
Y-Axis Rapid Traverse 900 mm/min
Z-Axis Movement 310 mm
Z-Axis Rapid Traverse 900 mm/min
V-Axis Movement 120 mm
V-Axis Rapid Traverse 450 mm/min
U-Axis Movement 120 mm
U-Axis Rapid Traverse 450 mm/min
Workpiece
Workpiece weight 100...
3
Wire EDM Mitsubishi FX 20 K 06-99-002
Delivery time: immediately
Number: 06-99-002
Machine data:
Year of manufacture: approx. 1999
B3yymcwtjg
L x W x H: approx. 2500 x 2690 x 2050 mm
Weight: approx. 2550 kg
Very good general condition
Technical specifications:
Control: CNC
Accuracy: at least +- 0.0015 mm (depending on the processing area)
traverse paths:
X - axis: approx. 500 mm
Y - axis: approx. 350 mm
Z - axis: approx. 300 mm
Max. workpiece size: approx. 1050 x 800 x 295 mm
Max. workpi...
4
AGIECHARMILLES +GF+ CUT30P - 2016 Wire cutting EDM machin
Bxubct987v
4
GF AgieCharmilles CUT 3000
Year of manufacture 2011
travels: X= 500 mm, Y= 350 mm, Z= 256 mm
Travels U/V axis: +/- 70 mm
Maximum taper: 30° at 100 mm height
Maximum workpiece dimensions: 1050 x 650 x 250 mm
Maximum workpiece weight: 400/800 kg
Best achievable surface quality: Ra: 0.05 µm
Available wire diameters: 0.10 - 0.30 mm
Water bath machine with automatic wire threading
With automatically lowerable tank (accessible from 2 sides)
Incl. AGIEJOGGER- hand box for comfortable set-up
VISION 5 co...
14
Hello,
for sale is a good used wire eroding machine brand Fanuc Robocut Alpha 1iC from year of manufacture 2005.
The wire eroding machine has only ca.21000 operating hours!!!!
Technical data:
Travel: X550 x Y370 x Z310 mm
Workpiece size Max.X: 820 mm
Workpiece size Max.Y: 730 mm
Workpiece size Max.Z: 300 mm
Workpiece weight: max.1000 kg
With automatic wire threading (AWF).
U- / V- axis: +/- 60 mm x +/- 60 mm
The eroding machine cuts in a water bath .
Cooler included.
Manuals included....
12
Controller Fanuc Series 310is WA (15 inch touch screen, 2 x USB)
Max wpc size 1050 x 820 x 300 mm
Max wpc weight 1000 kgs
X travel 600 mm
Y travel 400 mm
Z travel 310 mm
U travel 200 mm
V travel 200 mm
Rapid speed 900 mm/Min (X/Y/Z axis)
Rapid speed 450 mm/Min (U/V axis)
Wire diameter D0,1 - 0,3 mm
Max conical cut +/-30 degree /150 mm
Max conical cut +/-45 degree /70 mm
Power supply 13 kVA
Machine dimensions L x W x H = 2440 x 2930 x 2160 mm
Weight ca 3000 kgs
Accessories
- Manual pulse genera...
12
General Data
Measurements width 2850 mm
Measurements depth 2950 mm
Measurements height 2560 mm
Machine weight 4000 kg
Control Unit
Brand Ona
Main Drive
Number of axis 6
Movement
X-Axis Movement 600 mm
Y-Axis Movement 400 mm
Z-Axis Movement 400 mm
V-Axis Movement 120 mm
U-Axis Movement 120 mm
Workpiece
Workpiece X 1060 mm
Workpiece Y 750 mm
Workpiece Z 400 mm
Workpiece weight 1500 kg
This ONA AF35 erosion machine was manufactured in 2016 in Spain. It is operated through a control unit of the...
8
Catalog No. : 5607
Type: 355R
Producer: Hitachi
Made in: 2000
Characteristic:
Control system: MARK-10W
Workpiece length: 700 mm
Workpiece width: 500 mm
Maximum travel length X-axis: 500 mm
Maximum travel length Y-axis: 350 mm
Dxcnf8zr
Maximum travel length Z-axis: 300 mm
Travel length U-axis ( -): 200 mm
Travel length V-axis ( -): 200 mm
4
technical details coming soon!
B3evdaw70w
4
AGIECUT Progress VP3
Year of manufacture 2011
travels: X= 500 mm, Y= 350 mm, Z= 426 mm
travels U/V-axis: +/- 70 mm
Maximum conicity: 30° at 100 mm height
Maximum workpiece dimensions: 1050 x 650 x 420 mm
Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg
B3qywopblj
Achievable surface quality: Ra: 0.20 µm
Maximum cutting rate: 500 mm²/min
Glass scales on X and Y axis for increased precision
Available wire diameters: 0.15 - 0.33 mm
Water bath machine with automatic wire threading and ...
5
Travel X-axis 600 mm
Travel Y-axis 400 mm
Travel Z-axis 270 mm
B3i7ferrli
Axis U 90 mm
Axis V 90 mm
Dimensions of table working surface 1040x780 mm
Max. weight of workpiece 850 kg
Machine weight 3140 kg
Machine dimensions l x w x h 2620x2605x2080 mm
The machine is in excellent condition. Possible to test under power.
3
Mitsubishi MV2400S Wire EDM Machine
Travel: X=600mm; Y=400; Z=310mm
Workpiece dimension: 1050 x 820 x 305 (mm)
Very good condition
Year of construction: 2015/10
P7zsd
Very few Working Hours: 8321Hours
7
General Data
Measurements width 2300 mm
Measurements depth 1560 mm
Measurements height 2850 mm
Gwfyhs
Machine weight 3430 kg
Control Unit
Brand Charmilles
CNC language customizable Yes
Movement
X-Axis Movement 500 mm
Y-Axis Movement 400 mm
Z-Axis Movement 450 mm
B-Axis Movement 360 Degrees
Workpiece
Workpiece weight 1000 kg
Table
Outer length 750 mm
Outer width 500 mm
Media
Main electronic connection 380 V
Power consumption 6 kVA
Additional Equipment
6 Station Tool Changer
This CHARMILLES...
10
Control system: AGIEVISION
Maximum travel length X-axis: 500 mm
Maximum travel length Y-axis: 350 mm
Maximum travel length Z-axis: 256 mm
Maximum workpiece dimensions: 1050x650x250 mm
Jscv8wgb
Largest workpiece weight: 800 kg
4
table length 500 mm
table width 350 mm
ampere 65 A
Control AGIEVISION 5 CNC
total power requirement 20 kW
weight of the machine ca. 4000 kg
dimensions of the machine ca. m
A G I E (Switzerland)
CNC - Controlled Wire Cutting EDM Machine
Model AGIECUT PROGRESS V 3, Year 2007
Working range, X Y Z (=height) 500 x 350 x 426 mm
Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm
Resolution of axes 0.0001 mm
Speed for positioning the axes up to 3 m/Min.
Tolerances (If machine is new) ...
5
GF AgieCharmilles CUT 30
B3pdutuofi
Year of manufacture 2008
travels (X/Y/Z): 600 x 400 x 350 mm
travels (U/V): +/- 50 mm
max. workpiece dimensions mm: 1050 x 800 x 350
max. workpiece weight kg: 1000
measuring system: glass scale (XY) / encoder (UVZ)
possible diameter wire guides: 0,15 - 0,30 mm
maximum taper: ± 25° at 80 mm height
automatic wire threading
best surface finish: Ra 0,25 µm
machine dimensions (LxWxH): 3100 x 2800 x 2325 mm
machine weight: 5000 kg
The machine is cleaned, completely ...
1
CHARMILLES ROBOFIL 6050TW - 2007 Wire cutting EDM machine
Bvgms8yvfd
3
Wire cutting machine ALC600G
Producer: Sodick
YP: 2017
Axis X ... 600mm
Y axis ... 400mm
Axis Z ... 350mm
Axis U ... 150mm
Axis V ... 150mm
Max. Table load ... 1000kg
L x W x H ... 2495x3500x2345mm
Machine weight ... 4600kg
Machine under power about 4265 hours
Fpv3xfft8
The machine is in good condition and can be tested under power.
7
Control Unit
Brand MAKINO
Model MGW-N2
Main Drive
Number of axis 5
Movement
X-Axis Movement 600 mm
Y-Axis Movement 400 mm
Z-Axis Movement 260 mm
Bwadwrycta
V-Axis Movement +- 75 mm
U-Axis Movement +- 75 mm
Workpiece
Workpiece weight 1500 kg
Additional Equipment
Coarse wire storage for spools P15
Automatic threading in small start holes
Automation with handling devices
This Makino EU64 CNC eroding machine and wire cutting machine was built in 2007. It is operated through a MAKINO MGW-N2 cont...
9
fanuc alfa 1IA
build 2000
B2dsjllhz8
x,y,z,u,v 570 x 370 x 310 x 120 x 120 mm
fanuc series 18i-w control
chiller
remote control
first owner, the machine is in very good condition, and can be inspected under power.
we can also sell a lot of accessories if needed.
4
Wire eroding machine Makino DUO 43 , bj 2011
table length 710 mm
table width 560 mm
Workpiece dimensions max. 710 x 560 x 300 mm
workpiece weight max. 800 kg
wire diameter 0,1/0,15/0,2/0,25/0,3 mm
x-axis 450 mm
y-axis 300 mm
z-axis 320 mm
F037quxau
U-axis +/- 101 mm
V-axis +/- 101 mm
4
Travel:
X 500 / Y 350 / Z 400
Travel (U/V) mm ± 75 x ±75
Max. Workpiece dimensions (W x D X H) mm 1050 x 800 x 395
Max. workpiece weight workpiece weight kg 1500
Bz2pmlj97h
12
Wire eroding machine
Manufacturer: AGIE
Type: AGIECUT CHALLANGE 3
Year of manufacture: 2002
B2s7gfejbe
Serial number: 249
Technical documentation is supplied electronically
X/Y/Z axes: 500 x 350 x 256 mm
U/V axes: +/- 70 mm
Max. Conicity: 30 degrees/100mm
Cylindrical step: 300 mm²/min
Ra value: 0.1 micron
Deflectable height up to 250 mm
Diameter: 2/1 mm
Wire diameter: 0,1- 0,33 mm
V-guide: cylindrical up to 2 degrees
With automatically lowerable trough
Filling volume: 1000 l
Overall dimensions: ...
8
GF AgieCharmilles CUT 300
Year of manufacture 2013
Charmilles Millenium control
travels (X / Y / Z): 550 x 350 x 400 mm
Travels (U / V): 550 x 350 mm
Max. Taper angle: +/- 30° at 400 mm height
Integrated Collision Protection (ICP) on all 5 axes
Maximum workpiece dimensions: 1200 x 700 x 400 mm
Maximum workpiece weight: 1500 kg
Cutting speed of 340 mm²/min
Pyzgh
Best surface finish: Ra 0,1 µm
Available wire diameters: 0.15 mm to 0.33 mm
Dimensions of the complete line: 2600 x 2540 x 2240 mm
Total...
3
General Data
Measurements width 1852 mm
Measurements depth 2825 mm
Measurements height 2570 mm
Machine weight 5350 Kg
Control Unit
Brand Sodick
Interface LAN
Movement
X-Axis Movement 600 mm
Y-Axis Movement 420 mm
Z-Axis Movement 370 mm
Workpiece
Workpiece weight 1500 Kg
Table
Outer length 750 mm
Outer width 550 mm
Distance between 850 mm
Media
Air pressure 0.65 MPa
Dielektikum tank 465 l.
This Sodick AG60L Erosion Machine was built in the year 2016. It has been productive for approximately...
2
travels 500X350X350MM
tank 860X650X315MM
B097hgpjje
magnetic table
3
control Mitsubishi CNC
travel X/Y/Z 500/350/300 mm
max. workpiece weight 800 kg
table size 780x630 mm
Bb7tt2ue80
5
Travel
X 500 mm
Y 350 mm
Z 300 mm
U-/V- travel: +-75 mm
Water bath machine
Automatic wire threading
incl. water cooler
B3hskrb9pr
U-/V- axis: +-75 mm
9
Wire eroding machine
Manufacturer: SODICK
Type: A535
Control: SODICK MARK 25
Technical data without guarantee:
Travel:
X-axis: 555 mm
Y-axis: 355 mm
Z-axis: 300 mm
880jrk3
Max. workpiece dimensions:
X: 870 mm
Y: 620 mm
Z: 220 mm
Incl. coolant system, transformer as well as a second cannibalized machine for spare part components.
The cannibalized machine was running until the end according to the seller, all components should therefore be functional.
Total dimensions: 2700 x 2500 x 2300 mm
total ...
7
5-Axis Wire -Cut EDM
CNC Control Fanuc Series 16-w
Movement X-axis 520 mm
Movement Y-axis 370 mm
Movement U-axis ± 60 mm
Movement V-axis ± 60 mm
Movement Z-axis 300 mm
Controlled axes 5
Controlled axes simultaneous 4
Wire diameter 0,1/0,14/0,15/0,15/0,20/0,25/0,30 mm
Wire feed 1 - 15 m/min
Bzybp9itaq
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
3
General Data
Measurements width 1904 mm
Measurements depth 2300 mm
Measurements height 2220 mm
Y9f7w
Machine weight 3460 kg
Control Unit
Brand Agie
Model Agievision
CNC language customizable Yes
Main Drive
Wire diameter 0.2 ÷ 0.33 mm
Movement
X-Axis Movement 500 mm
Y-Axis Movement 350 mm
Z-Axis Movement 256 mm
Workpiece
Workpiece X 1050 mm
Workpiece Y 650 mm
Workpiece Z 250 mm
Workpiece weight 800 kg
Media
Main electronic connection 3x400 V
Power consumption 9 kVA
This AGIE Agiecut Classic...
4
fanuc 16W
Qlo28zao
capacity workpiece 800X730X300MM
travels 520X370X310MM
650 liters
workpiece weight 750KGS
2
Control Fanuc
Travels X / Y / Z: 520 x 370 x 410 mm
Travels U / V: 120 x 120 mm
cooling unit
Be8ymkljsd
4
Travel X 500 / Y 350 / Z 300,
water bath machine,
automatic wire threading,
incl. cooler,
network connection
Nf2erp9p
Documentation
4
Travel axes: 550 x 370 x 310 mm [ X x Y x Z ]
Vuwniq
max. workpiece size X: 820 mm
max. workpiece size Y: 730 mm
max. workpiece size Z: 300 mm
max. workpiece weight: 1000 kg
with AWF ( Automatic Wire Feeding )
U / V axis: +/- 60 mm X +/- 60 mm
submerged
max taper cut: +/- 30° with 80 mm
9
FANUC Alpha 1iC
X = 550 mm
Y = 370 mm
Z = 310 mm
C7pfhpj
U & V = 120 mm
Maximum workpiece weight: 1000 kg
CN : FANUC 18is WB
15
Control Unit
Brand Sodick
Model Mark 25
CNC main language English
CNC language customizable Yes
Main Drive
Wire diameter 0.1 - 0.3 mm
Number of axis 3
Movement
X-Axis Movement 555 mm
Y-Axis Movement 355 mm
Zbqk8
Z-Axis Movement 300 mm
Workpiece
Workpiece X 870 mm
Workpiece Y 620 mm
Workpiece Z 220 mm
Workpiece weight 450 KG
Media
Main electronic connection 400V
Additional Equipment
Dielectric Tank
Chiller
This Sodick A535 Wire Erosion machine was manufactured in the year 2002. It shows 148...
3
AGIECUT Excellence 3 eCut
Year of manufacture 2004
travels: X= 500 mm, Y= 350 mm, Z= 256 mm
travels U/V-axis: +/- 70 mm
Maximum taper: 30° at 100 mm height
Maximum workpiece dimensions: 1050 x 650 x 250 mm
Maximum workpiece weight: 400/800 kg
Achievable surface quality: Ra: 0,1 µm
Available wire diameters: 0.10 - 0.33 mm
Waterbath machine with automatic wire threading
With automatically lowerable tank (accessible from 2 sides)
Incl. AGIEJOGGER- hand box for comfortable setup
Incl. AGIESETUP 3D
A...
7
Manufacturer: Baoma Numerical Control Equipment Co., Ltd
Control: CNC
Table dimensions: 600 х 900 mm
Table travels: 500 х 630 mm
Max. Height of workpiece: 800 mm
Max. Processing angle: ±6° / 100 mm
Max. processing speed: 180 mm2 /min
Machining accuracy: ≤0,012 mm
Max. Operating current: 10 А
Surface roughness: ≤1,2 micrometer
Wire diameter: 0,15-0,2 mm
Bdq2kjtg
Wire feed: 5-11 m / min
7
Wire Eroding Machine / Brand: MITSUBISHI /
Type: POWER MASTER-LINE FA20 / Year of construction: 2003
The machine can be inspected by appointment in the factory
under power.
Condition: Well used, functional
TECHNICAL DATAS:
- Travels (X/Y/Z): 500 x 350 x 300 mm
- Workpiece weight max.: 1,5 t
- Table dimensions: 780 x 630 mm
- Table feed max.: 1.300 mm/min
- Diameter: 0,1 - 0,3
- Wire feed max.: 15 m/min
- Wire tension: 2 - 25 N
- Taper unit: Standard equipment
- Travels (U/V): +/- 32 x +/- 3...
Travel axes: 500 x 350 x 426 mm [ X x Y x Z ]
max. workpiece size X: 1050 mm
max. workpiece size Y: 650 mm
Skhiivzb
max. workpiece size Z: 420 mm
max. workpiece weight: 800 kg
with AWF ( Automatic Wire Feeding )
U / V axis: +/- 70 mm
submerged
max. taper cut: +/- 30° with 100 mm
generator: IPG VPC
11
Mitsubishi EDM wire cut machine offered.
Type: CX 20
X-travel: 500 mm
Y-travel: 350 mm
Z-travel: 300 mm
U/V travel: +/- 32 mm
Table: 590 x 740 mm
Max workpiece weight: 800 KG
Year: 05-1996
Included documentation and software
Eqs820v9q
Dimensions: 270x200x210 cm LxWxH
Weight: ca 2200 KG
Movie available!
For more information call us or send an e-mail.
1
EDM machine (X: 500 mm) + C-axis
SMA-REF-6465
Bfps3kn7fa
Type: die-sinking EDM machines
Manufacturer: AEG Elotherm
Model: ELBOMAT 222 BA
Year: 1994
Electrode changer: 16 tools
Working range:
X: 500 mm
Y: 400 mm
Z: 300 mm
C-axis (Hirschmann)
Features:
Table: 750 x 530 mm
Clamping system Hirschmann
Condition:
in use
ready to be tested
Control: Elotrance 3
Location: Central Germany
Availability: on demand
3
AGIECUT Progress V3
Year of manufacture 2006
travels: X= 500 mm, Y= 350 mm, Z= 426 mm
travels U/V-axis: +/- 70 mm
maximum conicity: 30° at 100 mm height
Maximum workpiece dimensions: 1050 x 650 x 420 mm
Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg
Achievable surface quality: Ra: 0.20 µm
Maximum cutting rate: 500 mm²/min
Glass scales on X- and Y-axis for increased precision
Available wire diameters: 0.15 - 0.33 mm
Water bath machine with automatic wire threading and rethreading...
3
Control type: Mitsubishi
Automatic threading
X-axis 500 mm
Y-axis 350 mm
Z-axis 300 mm
workpiece length 1050 mm
workpiece width 800 mm
Bt83m9szpg
workpiece height 295 mm
7
Working area 500 x 350 x 250;
see pictures;
Habemngx
if required with extensive accessories