English
German English French Dutch Dutch

Used Wire erosion machine x-travel 300-399mm for sale

48 Results for
Cancel
MITSUBISHI FX 10 K MITSUBISHI FX 10 K MITSUBISHI FX 10 K MITSUBISHI FX 10 K
more images
4
Call
Trittau, Germany Germany
(dealership location)
7709 km
1998
used
table length 630 mm table width 530 mm Control MITSUBISHI travel: Qb9jz x-axis 350 mm y-axis 250 mm z-axis 220 mm max. workpiece weight 500 kg max. size of workpiece LxWxH 575 x 800 x 215 mm capacity 13,5 kVA weight of the machine ca. 1850 kg In our opinion, the machine is in good condition and can be inspected under power by appointment. ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes ...
AGIE AGIECUT EVOLUTION BC 2 AGIE AGIECUT EVOLUTION BC 2
more images
2
Call
Bühl, Germany Germany
(dealership location)
7891 km
1997
used
x-travel 350 mm y-travel 250 mm z-travel 256 mm max. size of workpiece 750 x 550 x 250 mm U-axis +/- 70 mm V-axis +/- 70 mm rapid traverse X/Y/Z axis 1,5 / 1,5 / 0,6 m/min rapid traverse U/V-axis 0,6 m/min Beohs2r3hy max. concentricity 30° / 100 mm control AGIEVISION wire dia. 0,1 - 0,33 mm speed of wire 60 - 300 mm/sec wire retraction halbautomatisch total power requirement 9,1 kVA weight of the machine ca. 3,6 t dimensions 2,21 x 2,21 x 2,22 m
AGIE Challenge 2 AGIE Challenge 2 AGIE Challenge 2 AGIE Challenge 2 AGIE Challenge 2 AGIE Challenge 2
more images
6
Call
Nürtingen Germany
7970 km
2000
refurbished (used)
AGIECUT Challenge 2 Year of manufacture 2000 travels: X= 350 mm, Y= 250 mm, Z= 256 mm travels U/V-axis: +/- 70 mm maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg Achievable surface quality: Ra: 0.3 µm Average contour tolerance Tkm +/- 4 µm Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfo...
FANUC / MATRA Robocut Alpha i0A FANUC / MATRA Robocut Alpha i0A FANUC / MATRA Robocut Alpha i0A
more images
3
Call
Mögglingen Germany
7995 km
2000
excellent (used)
Control Fanuc 18iW Travel X/Y/Z: 320 x 220 x 180 mm Travel U/V: +/- 60 mm Yuy8q8 Max. workpiece size 650 x 420 x 170 mm
Call
Dreieich, Germany Germany
(dealership location)
7842 km
1998
used
table length 600 mm table width 400 mm ampere A travel -x axis 350 mm travel -y axis 250 mm travel -z axis 220 mm U-axis 80 mm V-axis 80 mm wire dia. 0,03 - 0,3 mm Brd8kihh0s work tank size 895 x 650 mm max. workpiece weight 450 kg workpiece height max. 220 mm workpiece sizes max. 600w x 530 x 200 mm automatic wire feeding conical grinding +/- 30° / 30 mm ° wire clamping 300 - 2300 g dielectric 530 l total power requirement kVA weight of the machine ca. 3000 kg dimensions of the machine ca....
Neuar i-cut M50 Neuar i-cut M50 Neuar i-cut M50 Neuar i-cut M50 Neuar i-cut M50 Neuar i-cut M50
more images
6
Call
Kaiserslautern, Germany Germany
(dealership location)
7824 km
2014
ready for operation (used)
General Data Measurements width 1400 mm Measurements depth 1380 mm Measurements height 2200 mm Machine weight 1350 kg Control Unit Brand Heidenhain Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 200 mm Workpiece Workpiece weight 500 kg Table Outer length 630 mm Outer width 360 mm Media Main electronic connection 400V, 3 phases, 50Hz Power consumption 3.3 kVA B9o82jndvd This Neuar i-cut M50 Erosion machine was manufactured in 2014. It is ...
Mitsubishi FX 10 Mitsubishi FX 10 Mitsubishi FX 10 Mitsubishi FX 10 Mitsubishi FX 10
more images
5
Call
Trenčín, Slovakia Slovakia
(dealership location)
8453 km
1997
used
under power travels: X 350 mm, Y 250 mm, Z 220 mm table: 630x530 mm max. workpiece weight 500 kg max. workpiece size w x d x h: 800 x 575 x 215 mm tank capacity 400 l weight 2740 kg machine size 1390x1865x1800 mm Carg0cmjkr water tank size 800x1360x1720 mm size of el. box 800x600x1880 mm
Hitachi  Hitachi 355Y INV 24007 Hitachi  Hitachi 355Y INV 24007 Hitachi  Hitachi 355Y INV 24007
more images
3
Call
Beroun Czech Republic
8154 km
2000
good (used)
The machine is in good technical condition, by prior arrangement the possibility of test drive. Axis travel: X 350, Y 500, Z 300 mm U x V travel: 200 x 200 mm Max. workpiece dimensions: 350 x 500 x 300 mm Generator FFII AFW Cooling Dielectric Water Bath Alternator Caqugt9aud
AGIE Classic 2S AGIE Classic 2S AGIE Classic 2S AGIE Classic 2S AGIE Classic 2S
more images
5
Call
Nürtingen Germany
7970 km
2001
refurbished (used)
AGIE Classic 2S Year of manufacture 2001 travels (X/Y/Z): 350 x 250 x 256 mm travels (U/V): +/- 70 mm Possible taper: +/- 30° at 100 mm Cascyetxij Available wire diameters: 0,2-0,33 mm Best surface finish: Ra 0,3 µm Max. Workpiece dimensions (width/depth/height): 750 x 550 x 250 mm Max. Workpiece weight (with / without bath): 200 / 450 kg Plant dimensions (width/depth/height): 1640 x 2040 x 2220 mm Operating weight: 2680 kg Incl. documentation Incl. 6 months warranty Incl. commissioning and trai...
Call
Cascina Faustina Italy
8156 km
2000
excellent (used)
Sodick AQ 325L wire EDM used is a numerically controlled 5-axis EDM with LINEAR motors; axes travel X 350, Y 250, Z 220mm, table dimensions 600x400mm maximum load 450kg, workpiece dimensions 895x650 mm, complete with automatic threading, refrigerator, immersion processing and wire shredder; year of construction 2000, according to CE standards. Ewdxn9h
more images
ROBOFILE 290 CHARMILLES TECHNOLOGY Year 1997 Jx373a
CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P CHARMILLES ROBOFORM 35P
more images
13
Call
Kaiserslautern, Germany Germany
(dealership location)
7824 km
2001
ready for operation (used)
General Data Machine weight 2500 KG Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 350 mm Caif8jgeni Workpiece Workpiece X 780 mm Workpiece Y 530 mm Workpiece Z 300 mm Workpiece weight 800 KG Table Outer length 500 mm Outer width 400 mm Media Main electronic connection 3 x 380V / 50Hz Power consumption 5 kVA This CHARMILLES ROBOFORM 35P EDM machine was made in Switzerland in 2001. It has been working for 37328 hours. It operates with a table dimensions of 500 x 400 m...
HITACHI  355Y
more images
1
Call
Kobližná 3, 602 00 Brno-střed, Tschechien Czech Republic
8351 km
2000
good (used)
Catalog No. : 4296 Type: 355Y Producer: HITACHI Made in: 2000 Characteristic: Length of the table: 1160 mm Width of the table: 638 mm Maximum travel length X-axis: 350 mm Maximum travel length Y-axis: 500 mm Maximum travel length Z-axis: 300 mm Travel length U-axis ( -): 200 mm Travel length V-axis ( -): 200 mm FFII Generator AWF Dielectric cooling Bath 2rhqo3 Power Generator X2
Hitachi  355Y INV 18433 Hitachi  355Y INV 18433
more images
2
Call
Beroun Czech Republic
8154 km
2000
good (used)
Travels in X, Y, Z axis: 350x500x300 mm Description: The machine is in good technical condition, by prior arrangement the possibility of test drive. W8hfn7nu
AGIE Excellence 2F AGIE Excellence 2F AGIE Excellence 2F AGIE Excellence 2F
more images
4
Call
Nürtingen Germany
7970 km
2001
refurbished (used)
AGIECUT Excellence 2F, year 2000; Achievable surface quality: Ra 0.1 µm; Travel: X=350 mm, Y=250 mm, Z=256 mm; Dual measuring system with glass scales in X and Y axis; Waterbath machine with automatic wire feeding; With lowerable container; Incl. wire straightener; F-module for wires 0.03 - 0.33 mm Conical cutting device up to max. 30 degrees; 3lyegdhzl Incl. universal clamping frame and hand box; Order management is possible on the machine; The machine will be completely overhauled and tested b...
Makino U 53 K Makino U 53 K
more images
2
Call
Braak Germany
7701 km
1999
ready for operation (used)
Working area 520 x 370 x 320 mm Qhojf U/V 35 mm To be seen in use Available : immediately
Agie Challenge 2 e cut Agie Challenge 2 e cut Agie Challenge 2 e cut Agie Challenge 2 e cut Agie Challenge 2 e cut Agie Challenge 2 e cut Agie Challenge 2 e cut Agie Challenge 2 e cut Agie Challenge 2 e cut Agie Challenge 2 e cut Agie Challenge 2 e cut
more images
11
Call
Oberkotzau Germany
8014 km
2005
good (used)
DESCRIPTION Year 2005 Operating hours: 62430 Eroding hours: 42532 Travel X-Y-Z 350 x 250 x 250 mm; Taper: travels +/- 30°to 100 mm in U/V axes. Wire diameter 0.3, 0.25, 0.2 mm possible Accessories: Gyoft0 - Wire straightener - Manuals - Special features: - New adjustment of the complete telescope unit incl. eroding heads - Newly serviced Further services are included: Warranty
Maho HS 300 E Maho HS 300 E Maho HS 300 E Maho HS 300 E
more images
4
Call
Kaiserslautern, Germany Germany
(dealership location)
7824 km
1992
ready for operation (used)
General Data Machine weight 1500 kg Movement X-Axis Movement 300 mm Y-Axis Movement 190 mm Qhsf2 Z-Axis Movement 285 mm Table Outer length 450 mm Outer width 350 mm Media Power consumption 7,5 kVA This MAHO HS 300 E Erosion machine manufactured in 1992. This machine counts with a Erowa ITS 50 head and an automatic electrode changer with 6 positions. Machine in very good condition and fully overhauled in 2017. Application Types EDM
FANUC  Robocut α - 0C  FANUC  Robocut α - 0C  FANUC  Robocut α - 0C  FANUC  Robocut α - 0C  FANUC  Robocut α - 0C  FANUC  Robocut α - 0C  FANUC  Robocut α - 0C
more images
7
Call
Zevenbergen Netherlands
7503 km
1997
excellent (used)
5-Axis Wire -Cut EDM CNC Control Fanuc Series 16-w Bil0wsj8 Movement X-axis 320 mm Movement Y-axis 220 mm Movement U-axis ± 60 mm Movement V-axis ± 60 mm Movement Z-axis 180 mm Controlled axes 5 Controlled axes simultaneous 4 Wire diameter 0,1/0,14/0,15/0,15/0,20/0,25/0,30 mm Wire feed 1 - 15 m/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.
Sodick AQ 325 L Sodick AQ 325 L Sodick AQ 325 L
more images
3
Call
Emmelshausen Germany
7767 km
2004
good (used)
Travel axes: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size X: 895 mm max. workpiece size Y: 650 mm max. workpiece size Z: 220 mm max. workpiece weight: 450 kg table size X: 600 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: 80 mm x 80 mm submerged control: LQ1W B70dmtplnq max. taper cut: +/- 20° with 80 mm
AGIE Progress 2 AGIE Progress 2 AGIE Progress 2 AGIE Progress 2 AGIE Progress 2 AGIE Progress 2 AGIE Progress 2
more images
7
Call
Nürtingen Germany
7970 km
2004
refurbished (used)
AGIECUT Progress 2 Year of manufacture 2004 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm travel distances U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axis for increased precision Available wire diameters: 0.20 - 0.33 mm Esakg0l7w Water bath machine with automatic wire threading an...
CNC wire eroding machine Bxp8qumils Manufacturer: Makino Type: EC 3040 Year of manufacture: 1992 Control: Fanuc Travel X-axis: 300 Y-axis: 400 Z-axis: 280
CHARMILLES Robofil 240 CHARMILLES Robofil 240 CHARMILLES Robofil 240 CHARMILLES Robofil 240 CHARMILLES Robofil 240 CHARMILLES Robofil 240 CHARMILLES Robofil 240 CHARMILLES Robofil 240 CHARMILLES Robofil 240 CHARMILLES Robofil 240 CHARMILLES Robofil 240
more images
11
Call
Porto de Mós Portugal
7270 km
2001
refurbished (used)
Photo of the machine in its current state. Machine will be sold cleaned, overhauled and tested. Customer test possible. X / Y / Z strokes: 350/220/220 mm. HMI interface. B3cdhmxrqa
CHARMILLES / Fanuc  Robofil 10 CHARMILLES / Fanuc  Robofil 10 CHARMILLES / Fanuc  Robofil 10 CHARMILLES / Fanuc  Robofil 10 CHARMILLES / Fanuc  Robofil 10 CHARMILLES / Fanuc  Robofil 10 CHARMILLES / Fanuc  Robofil 10 CHARMILLES / Fanuc  Robofil 10 CHARMILLES / Fanuc  Robofil 10 CHARMILLES / Fanuc  Robofil 10 CHARMILLES / Fanuc  Robofil 10
more images
11
Call
Kierspe Germany
7708 km
1994
defective spare-parts repository (used)
Name: Charmilles Robofil 10 Year of manufacture: 1994 Dimensions machine ( W x D x H ) - base body 2,2m x 1,8m x 2m - dielectric tank + filter station 1,3m x 1,2m x 0,9m - dielectric cooler 0,6m x 0,6m x0,5m - Transformer station 0,6m x 0,5m x 0,6m Yuskw0 Weight (complete): 1,8t Control system: Fanuc Series 16-W Connected load: 12kVA Tank size dielectric: 260 liters Ion exchanger: 5L /min Dielectric cooler: available, optionally switchable Maximum workpiece size (W x D x H): 400x300x150mm Maximu...
Joemars Eurospark AWT355S Joemars Eurospark AWT355S
more images
2
Call
Burscough United Kingdom
6957 km
2010
excellent (used)
Joemars Eurospark CNC Wire Erosion Submerged Wire Eroder Model AWT355S AL5 Control Bzlghiux3q Year 2010 Working Table 710 x 560 x 205mm X Travel - 350mm Y Travel - 250mm Z Travel - 210mm U & V axis travel 80mm Taper angle max+/-24 degree - 80mm length Wire diameter 0.15 - 0.3mm Habor chiller tank Included x3 reels of brass wire and x2 resin
Mitsubishi BA8 Mitsubishi BA8 Mitsubishi BA8
more images
3
Call
Herscheid Germany
7715 km
2011
used
Travel X 320 / Y 250 / Z 220, B8nlw3tbvr water bath machine, automatic wire threading, incl. cooler,
AGIE Challenge V2 AGIE Challenge V2 AGIE Challenge V2
more images
3
Call
Nürtingen Germany
7970 km
2008
refurbished (used)
AGIECUT Challenge V2, Year of manufacture 2008 travels: X= 350 mm, Y= 250 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg (in bath / without bath) Achievable surface quality: Ra: 0.2 µm Average contour tolerance Tkm +/- 2-3 µm Available wire diameters: 0.15 - 0.33 mm Zy9ww Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) I...
Sodick A500W Sodick A500W Sodick A500W Sodick A500W Sodick A500W Sodick A500W Sodick A500W Sodick A500W Sodick A500W Sodick A500W
more images
10
Call
Székesfehérvár Hungary
8603 km
1998
good (used)
Controller SODICK X travel 500 mm Y travel 350 mm Z travel 270 mm Max size of workpiece (W x D x H) 700 x 500 x 260 mm Max weight of workpiece 700 kgs Travels of U-, V- axes 70 x 70 mm Wire diameter 0,1 - 0,3 mm Weight 3500 kgs Dimensions of machine LxWxH 2025 x 2295 x 2100 mm Accessories - Wirecollector - Transformer - Coolant unit Psay7 - Safety backups - Manuals
AGIE Classic V2 AGIE Classic V2 AGIE Classic V2 AGIE Classic V2 AGIE Classic V2 AGIE Classic V2 AGIE Classic V2 AGIE Classic V2 AGIE Classic V2 AGIE Classic V2
more images
10
Call
Siviriez Switzerland
7946 km
2008
good condition (used)
Machine in perfect condition, very little worked. Comes with new bridle. X/Y/Z strokes 350/250/256 mm Maximum room dimensions 750 x 550 x 250 mm Cutting, threading and rethreading H8puplxjq
AGIE CHARMILLES Agietron Integral 2 AGIE CHARMILLES Agietron Integral 2 AGIE CHARMILLES Agietron Integral 2
more images
3
Call
United Kingdom United Kingdom
6838 km
1997
good condition (used)
Can be seen running Serviced regularly by Agie Engineer Axis Travel (X,Y,Z) 350mm x 250mm x 350mm Toolchanger 28 position. Tooling Erowa  C axis - Yes Worldwide Delivery Available Installation available at additional cost Clyjxxrw
CHARMILLES ROBOFIL 240 CC CHARMILLES ROBOFIL 240 CC CHARMILLES ROBOFIL 240 CC CHARMILLES ROBOFIL 240 CC CHARMILLES ROBOFIL 240 CC
more images
5
Call
Emmelshausen Germany
7767 km
2004
good (used)
Travel axes: 350 x 220 x 220 mm [ X x Y x Z ] max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg table size X: 680 mm Byoy29nj7h table size Y: 450 mm with AWF ( Automatic Wire Feeding ) U / V axis: 350 mm x 220 mm submerged HM generator (CC) Large wire spool holder Wire chopper
AGIE Agiecut AC 100 (300/200/250) AGIE Agiecut AC 100 (300/200/250) AGIE Agiecut AC 100 (300/200/250) AGIE Agiecut AC 100 (300/200/250)
more images
4
Call
Staufenberg, Germany Germany
(dealership location)
7810 km
1988
used
Wire eroding machine make AGIE type Agiecut AC 100 Machine # 117 Year of construction 1988 technical data: working range X 300 mm working range Y 200 mm working range Z 250 mm table length 510 mm table width 580 mm Workpiece dimensions 810 x 580 x 250 mm Workpiece weight max. 200 kg wire diameter 0.03 - 0.3 mm Drmo0a0p Total power requirement 10 kW weight approx. 3,0 t with - Agiepuls MM - operating hours 33976 hrs. used, in very good condition
AGIE Excellence 2F eCut AGIE Excellence 2F eCut AGIE Excellence 2F eCut AGIE Excellence 2F eCut AGIE Excellence 2F eCut AGIE Excellence 2F eCut AGIE Excellence 2F eCut AGIE Excellence 2F eCut AGIE Excellence 2F eCut
more images
9
Call
Nürtingen Germany
7970 km
2006
reconditioned (used)
AGIECUT Excellence 2F eCut, year of construction 2006 travels: X= 350 mm, Y= 250 mm, Z= 256 mm Gowks3v travels U/V-axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg Achievable surface quality: Ra: 0.1 µm Average contour tolerance Tkm +/- 5 µm Available wire diameters: 0.03 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER...
ZIMMER & KREIM PEC 600 ZIMMER & KREIM PEC 600
more images
2
Call
Mögglingen Germany
7995 km
1988
good (used)
Control PEG 90 Travel X / Y / Z 350/250/320 mm 16-fold electrode changer EROWA clamping system Flushing device C-axis Worktable 572x400 mm G07appo Weight 2150 kg
Matra BT-2 Matra BT-2 Matra BT-2 Matra BT-2 Matra BT-2 Matra BT-2 Matra BT-2 Matra BT-2 Matra BT-2
more images
9
Call
Soerendonk Netherlands
7580 km
1999
good (used)
Matra EDM wire cut machine offered. Type: BT2 X-travel: 350 mm Y-travel: 250 mm Z-travel: 190 mm Bed: 300 x 600 mm B2x82h8axs Year: 1999 Dimensions: 120x105x220 cm LxWxH For more information call us or send an e-mail.
Sodick A 320 Sodick A 320 Sodick A 320 Sodick A 320
more images
4
Call
Burbach Germany
7762 km
1998
unexamined (used)
The system is functional and is sold as a spare parts carrier. Cueqqqgk All boards and the computer and screen are OK
AGIE Agiecut AC 100 AGIE Agiecut AC 100
more images
2
Call
Gransee Germany
7898 km
1988
good (used)
AGIE AGIECUT 100 type AC100/87 serie 122 Machine tool AGIECUT 100 Generator - AGIEPLUS-MM B3ttnnt Machine control - AGIEMATIC -C Dielectric aggregate – DA-15/AF Working table; length 560 mm , width 445 mm Max. dimensions of work piece; length 810 mm, width 580 mm, height 250 mm Table load max; 200 kg Height of work support over ground; 800 mm Longitudinal traverse (X-axis); 300 mm Cross traverse (Y-axis); 200 mm Rapid traverse; 30 mm/min Diameter of electrode wire...
AGIE Challenge 2 AGIE Challenge 2 AGIE Challenge 2 AGIE Challenge 2 AGIE Challenge 2
more images
5
Call
Burgoberbach Germany
8004 km
2001
good (used)
AGIECUT CHALLENGE 2 table length 750mm table width 500mm amps 131A x-axis 350mm Pv8eua y-axis 250mm z-axis 256mm table load 250kg max. workpiece size LxWxH 750x500x250mm total power requirement 9kVA machine weight approx. 3,6t space requirement approx. 4,0x2,5x2,3m
AGIE AGIECUT Evolution 2 AGIE AGIECUT Evolution 2 AGIE AGIECUT Evolution 2
more images
3
Call
Nürtingen Germany
7970 km
1997
refurbished (used)
AGIECUT EVOLUTION 2 Year 1997 Submerged machine Axis Travel (X/Y/Z): 350 x 250 x 256 mm Axis Travel (U/V): +/- 70 mm Max. Taper Angle: 30° bei 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best Surface: 0,2 µm Ra Max. cutting power: 300 mm²/min Machine dimensions (length/width/height): 2215 x 2215 x 2220 mm Weight: 4500 kg Inkl. AGIEJOGGER with LCD-Display and electric wheel 10,4" LCD-display with keybo...
AGIE 250HSS AGIE 250HSS AGIE 250HSS AGIE 250HSS AGIE 250HSS AGIE 250HSS AGIE 250HSS
more images
7
Call
Oberkotzau Germany
8014 km
good (used)
Operating hours: approx. 165065, eroding hours. approx. 30000 travels X-Y-Z 400 x 250 x 250 mm; taper: travels +/- 30mm in U/V axes surface quality Ra 0,3µm ( wire diameter 0,25mm) wire diameter 0,1; 0,15; 0,2; 0,25; 0,3mm possible Accessories: Wire straightener Manuals Storage media Spindle correction, Final Config Special features: Readjustment of the complete telescopic unit incl. eroding heads Further services are included: Disassembly and loading of the machine. Pmvch Gu...
ARD M50F ARD M50F ARD M50F ARD M50F ARD M50F ARD M50F ARD M50F ARD M50F
more images
8
Call
Soerendonk Netherlands
7580 km
1995
good (used)
ARD EDM diesinking machine offered. Type: M 50 F Control unit: ARD system Facile A X-travel: 310 mm Ug2myl2p Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.
CHARMILLES F45P CHARMILLES F45P CHARMILLES F45P CHARMILLES F45P CHARMILLES F45P CHARMILLES F45P
more images
6
Call
Planina pri Cerknem 44, 5282 Cerkno, Slovenia Slovenia
8419 km
1978
good condition (used)
DCNC Electrical Discharge machine. Punched tape reader/writer unit. Well preseved. Bwyxkmgpn0
Call
Поморие Bulgaria
9474 km
2022
new
EXCETEK Brand ZNC Die-Sinking Electric Discharge Machine Model ED40Z. ZNC programmable. XY travels manually. Qagc2 Z travel (program) = 180 mm, XY travels (manually) = 400×300 mm. Workpiece up to 700 kg. Machine tools weight =1350 kg. Max. work current = 50А. Max. cutting rate 400 мм3/мин (Gr-St). Best surface roughness Ra 0,2 микрона. Power consumption = 4,5 кВА
GF AgieCharmilles CUT 2000 GF AgieCharmilles CUT 2000 GF AgieCharmilles CUT 2000 GF AgieCharmilles CUT 2000 GF AgieCharmilles CUT 2000
more images
5
Call
Nürtingen Germany
7970 km
2012
reconditioned (used)
GF AgieCharmilles CUT 2000 Year of manufacture 2012 Equipped with AWC (Automatic Wire Changer) for the use of two different wire diameters Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V Generator Achievable surface quality: Ra: 0,05 µm Available wire diameters: 0.07 - 0.30 mm Water bath machine with automatic wire threading With automatically ...
AGIE Challenge 3 AGIE Challenge 3 AGIE Challenge 3 AGIE Challenge 3 AGIE Challenge 3
more images
5
Call
Oberkotzau Germany
8014 km
2001
good (used)
AGIECUT wire eroding machine Challenge 3 Year of manufacture: 2001 Serial number: 71 eroding hours: 40000 operating hours:94800 Travel: X-Y-Z 500 x 350 x 256 mm; taper 30 degrees up to 100mm height travels U-/V-axes: U = 70 mm, V = 70 mm Bsgr72vltd accessories: - Wire Alignment Set - manuals - Storage media data and machine backup Further services are included: Warranty: - Warranty on function with acceptance workpiece is given. Additionally we offer: -transport to the customer -commissioning ...
GF AGIE/Charmilles CUT 20 GF AGIE/Charmilles CUT 20 GF AGIE/Charmilles CUT 20
more images
3
Call
Nürtingen Germany
7970 km
2008
excellent (used)
GF AgieCharmilles CUT 20 P, Year of manufacture 2008 travels: X= 350 mm, Y= 250 mm, Z= 250 mm travels U/V-axis: +/- 45 mm Maximum conicity: +/- 25° at 80 mm height Bxrkpai7lb Maximum workpiece dimensions: 900 x 680 x 250 mm Maximum workpiece weight: 400 kg Achievable surface quality: Ra 0,25 µm Available wire diameters: 0.15 - 0.30 mm with closed diamond guides Water bath machine with automatic wire threading Manual front door accessible from 1 side Glass scales on X- and Y-axis Collision protec...
AGIE Progress 2 AGIE Progress 2 AGIE Progress 2
more images
3
Call
Nürtingen Germany
7970 km
2004
refurbished (used)
AGIECUT Progress 2 Year of manufacture 2004 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm travel distances U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethread...
AGIE AGIECUT Evolution 2 AGIE AGIECUT Evolution 2 AGIE AGIECUT Evolution 2 AGIE AGIECUT Evolution 2
more images
4
Call
Nürtingen Germany
7970 km
1999
refurbished (used)
AGIECUT EVOLUTION 2 Year 1999 Submerged machine Axis Travel (X/Y/Z): 350 x 250 x 256 mm Axis Travel (U/V): +/- 70 mm Max. Taper Angle: 30° bei 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Ixcmliun Best Surface: 0,2 µm Ra Max. cutting power: 300 mm²/min Machine dimensions (length/width/height): 2215 x 2215 x 2220 mm Weight: 4500 kg Inkl. AGIEJOGGER with LCD-Display and electric wheel 10,4" LCD-display w...