Used wire EDMs with x-travel of 400-499mm for sale (23)

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 255 mm, total width: 1,990 mm, overall weight: 1,800 kg, controller manufacturer: FANUC, controller model: 31i-WB, number of axes: 5, Wire EDM machine manufactured in 2018. This FANUC Robocut alpha-C400iB offers advanced cutting capabilities. If you are looking to get high-quality wire EDM capabilities, consider the FANUC Robocut alpha-C400iB machine we have for sale. Contact us for further details. • Workpiece capacity: max dimensions 730 × 630 × 250 mm; max workpiece weight 500 kg • Axis travel: U/V 120 × 120 mm • Machining capability: max taper angle ±30°/80 mm; minimum drive increment 0.0001 mm; wire diameter Ø0.10–Ø0.30 mm; max wire spool weight 16 kg • Controller: FANUC 31i-WB; part program storage 4 MB • Acoustic noise: LPA 64 dB; LPCpeak 81 dB • Optional specifications: • Thin wire option: wire diameter Ø0.05–Ø0.07 mm Cgelhceypma Iscqnjp • Automatic front door option: max workpiece dimensions with auto door 730 × 585 × 250 mm • 45° die guide option: max taper angle ±45°/40 mm • 30 kg wire feed unit option: max wire spool weight 30 kg • Installation conditions: • Power supply: AC 200V ±10%, 3-phase, 50/60 Hz ±1 Hz; AC 220V ±10%, 3-phase, 60 Hz ±1 Hz; connection cable terminal size 8-5; power consumption 13 kVA • Air supply: 0.5–0.7 MPa; 100–110 L/min (minimum 120 L/min with thin wire option); regulator-side coupler mounting screw Rc1/4 • Environment: 15–30°C (recommended 20 ±1°C for high-precision machining); oil-mist-free and dust-free; humidity ≤75% RH • Grounding: Type C; max grounding resistance 10 Ω; must be grounded independently from other machinery • Shield room requirement: If electrical discharge noise interferes with nearby radio, television, or electronic equipment, a shielded room must be installed

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of construction: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Cgjlhccjxpfy Sjqnop Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in XY axes Linear encoders in XY axes Intelligent AT – Automatic Wire Threading For wire diameter 0.10 – 0.3 mm Automatic fine hole searching function 5 controlled axes – prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä25226

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, wire diameter (max.): 0.3 mm, overall weight: 2,300 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA AE 400 wire EDM machine was manufactured in 2005. It features a maximum workpiece dimension of 800 x 500 x 250 mm and can handle a maximum workpiece weight of 500 kg. The machine also includes a dielectric tank capacity of 600 liters. If you are looking to get high-quality wire EDM capabilities, consider the ONA AE 400 machine we have for sale. Contact us for further details. • U/V axis travel: 80 x 80 mm Celheymal Esccqnogp • Max. workpiece dimensions: 800 x 500 x 250 mm • Max. workpiece weight: 500 kg • Max. taper angle: ±20° (at 100 mm height) • Dielectric tank capacity: 600 liters

Condition: used, Year of construction: 2013, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Colhcoylkvlscqnjgp Accessories: Total enclosure, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces. Probe, Automatic central lubrication, Coolant system for dielectric fluid, Automatic fire extinguishing system, Mist extractor, Machine lamp. Cutter outside diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outside diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm Tool weight: max. 20 kg X axis travel: 500 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis rotation range: 360 ° E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2280 mm Weight approx.: 4800 kg Connected load: 5,4 kW colour: gray RAL 7035/7043

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, Mitsubishi wire-cut EDM machine FA20-S advance, year 2011, fully functional. Can be inspected under power. Cgjlsylyhkshccqnjp

Condition: used, Year of construction: 2014, operating hours: 45,000 h, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Cgjlhcsyftr Ascqnep

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, Fanuc Alpha 1iC XL – extra high Z travel: 410 mm Excellent condition – fully operational Year of manufacture: 12/2006 Approx. 32,000 operating hours Control: Fanuc Alpha 180is-WB 5 axes: X: 550 mm / 900 mm/min rapid traverse Y: 370 mm / 900 mm/min rapid traverse U: 120 mm / 450 mm/min rapid traverse V: 120 mm / 450 mm/min rapid traverse Z: 410 mm / 900 mm/min rapid traverse Max. workpiece weight: 1000 kg Maximum cutting angle: 30° Automatic wire threading Weight approx. 3.1 t Cjlhcsyh Rt Tjcqnjgp Without screen above the control unit Availability: very soon Loading possible

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,760 mm, total width: 2,025 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 810 mm, table width: 640 mm, table length: 540 mm, empty load weight: 2,700 kg, Equipment: documentation/manual, USED ​​MITSUBISHI MV1200-S Wire EDM Cslhccjxlc Eqeqnsgp

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg Celheuzbayjccqnsgp The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm Cgjlsx Hghuehccqnep incl. chiller Automatic wire threading Water bath

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 00402, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 162 mm, workpiece width (max.): 760 mm, workpiece length (max.): 1,100 mm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! This machine is being auctioned as part of an operational closure. Placing a bid obliges the buyer to collect the item within the specified period from 26/01/2026 to 29/01/2026! TECHNICAL DETAILS Travel X-axis: 450 mm Travel Y-axis: 320 mm Travel Z-axis: 162 mm U-axis travel: ± 50 mm V-axis travel: ± 50 mm Max. workpiece dimensions: 1,100 x 760 mm Max. load capacity: 500 kg Max. workpiece height during immersion: 200 mm Max. workpiece height between wire guides: 360 mm Max. workpiece height for wire threading: 200 mm Tank dimensions: 1,150 x 200 x 2,280 mm Tank capacity: 1,000 l Measuring resolution: 1 µm Max. manual speed: 15 mm/s MACHINE DETAILS Control system: CHARMILLES Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 9 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,700 mm Weight: 5,000 kg EQUIPMENT Celhccqoxqpvyenjgp Matching workshop drawer cabinet Corresponding accessories Documentation

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Cgslhccewtd Edjqnsp

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Cjlhjxy Rx Isccqnsgp Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Cslhjxy Rxhoccqnogp Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM machine (electrical discharge machining) Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Table: 700 × 500 mm, load capacity up to 1000 kg Cjlhccqewww Sxjnogp C‑Axis: full rotation – ideal for rotary electrodes

Year of construction: 2007, condition: excellent (used), Makino SP 43 CNC control MGW-R Travels Cgjlhjiv H Dqeccqnop X: 450 mm Y: 300 mm Z: 320 mm U/V axis: +/- 101 mm table: 730x580 mm tub: 890x850 mm max.workpiece weight: 900 kg dimensions approx: LxWxH 3000x3000x2300 mm weight approx: 3400 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 25,539 h, functionality: fully functional, machine/vehicle number: 0.2633/331852, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 200 mm, total length: 800 mm, total width: 500 mm, workpiece height (max.): 200 mm, type of input current: three-phase, overall weight: 2,200 kg, table load: 500 kg, positioning accuracy: 0.005 mm, Equipment: cooling unit, documentation/manual, fridge, CHARMILLES TECHNOLOGIES from 2001 Model: ROBOFIL 290 P 0.25MM AND 0.30MM WIRE EROSION MACHINE MAKE AN OFFER TO BUY BACK Features: - Maximum part dimensions: 850 x 500 x 200 [mm] - Maximum weight: workpiece weight: 500 [kg] - X x Y x Z strokes: 400 x 250 x 200 [mm] - U x V stroke: 400 x 250 [mm] - clearance/height angle: ±30 [°] / 200 [mm] - wire diameter: 0.25 [mm] - acceptable coil types: P3 and P5 - tank capacity: 300 [l] - generator: 10 [kVA] - 400/400V isolation transformer - dimensions: 1800 x 1600 x 2130 [mm] - weight: 2200 [kg] Cgslhcov Rfm Sjcqnep

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! We do not know what is the probleme! Cgolhccqeik Hb Tensp

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fanuc Series 180iS-WB Control Celhewl Hiijccqnjgp Travel paths: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, Max. workpiece weight 500 kg, Machine weight 1,700 kg, Power supply 13 kVA The machine can be inspected while powered.

Condition: used, Year of construction: 2014, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 250 mm max. workpiece size X: 600 mm max. workpiece size Y: 470 mm max. workpiece size Z: 240 mm max. workpiece weight: 500 kg table size X: 860 mm table size Y: 690 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150 x 150 submerged Cjlhccqow H Awxjnegp cooling unit

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 2,230 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Cgslhccqew Hxqnonsp Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection on X/Y/U/V/Z axes Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg The machine was in operation with our customer until recently and is available immediately.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 200 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,190 kg, Charmilles Robofil 290P Year of manufacture: 2001 Travel distances (X/Y/Z): 400 x 250 x 200 mm Travel distances (U/V): 400 x 250 mm Taper angle: +/- 30° at 200 mm height Max. workpiece dimensions (W x D x H): 850 x 500 x 200 mm Max. workpiece weight: 500 kg Colhccqsw Htdpjnsgp Programmable pressure levels Injection pressure upper nozzle: 0...11.5 bar Injection pressure lower nozzle: 0...11.5 bar Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2180 mm Machine weight: 2190 kg The machine was in use with our customer until recently and is available for immediate delivery.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2758, TECHNICAL DETAILS Travel paths X / Y / Z: 600 / 400 / 300 mm Cutting capability: H/W 30°/45° (30/45° instead of 15° for 0.25 mm wire) Control unit: MITSUBISHI M700 Control software: MITSUBISHI ELECTRIC “ADVANCE Plus” Replacement of X and Y linear scales: November 2022 MACHINE DETAILS Total weight: 3,500 kg Overall length: 2,687 mm Overall width: 3,030 mm Overall height: 2,150 mm Input voltage: 400 V Input current: 50 A Type of current: Three-phase Input frequency: 50 Hz EQUIPMENT Cjlhcjwr Aclocqnsgp - ODS optical drive system - Direct drive motors for the X and Y axes - Linear scales on the X and Y axes - Intelligent automatic wire feeding system (wire diameter 0.1–0.3 mm) - Wire straightening unit - Automatic wire cutter (for thicker wires) - Automatic hole detection - 3D CAD/CAM control - 5 controlled axes + preparation for additional axes - PFC precision machining (Precise Finish Circuit) - LLS longevity system - 10 kg wire spool holder (reel) - U-shaped, hardened, segmented receiving table - Compressor dielectric (water cooling) - Preparation for remote communication (mcAnywhere) - CE version - Clear display of main functions on the screen - Programming with ESPERADVANCE interactive dialog system - Control unit prepared for receipt of 3D files - Graphical inspection: 3D, front view, side view, top view - Handheld control device - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)