Used gas handling equipment / gas tools for sale (12)

Condition: new, ! We are happy to advise you! Ncsdpfx Agorlmv Ej Usw Here we offer: Rittal control cabinets AX1076.000 Dimensions = 600x760x210mm

Year of construction: 2012, condition: excellent (used), functionality: fully functional, The technical condition is very good, and the device has been tested. This means that the devices are calibrated, perform 100% accurate measurements, and are regularly warmed up for at least 12 hours once a month. It is possible to perform an on-site transformer oil test – of course, after initial verification to compare the results, as shown in the photos. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay! The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. A gas standard (a cylinder with calibration gas) ensures measurement consistency with concentration standards. Before performing a measurement, the device is always calibrated, and its functionality is checked. A special shaking syringe (included) ensures the correct volume ratio. An excellent solution for oil laboratories in power plants and research facilities serving the power industry. PPMReport software with a Polish language version is included. It has built-in diagnostic tools: Duval's triangle and Rogers' ratios. Used by power plants, system operators, and laboratories serving the power and industrial sectors. The field version is equipped with a special pressure vessel for helium carrier gas (purity 99.999%). It is supplied with shaking syringes for preparing the extraction gas cushion, syringes for calibration, and an air sample. TECHNICAL PARAMETERS Number of gas types: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon monoxide CO, Carbon dioxide C02, Oxygen 02, Nitrogen N2) Measurement range for gas concentrations in oil: H2: 5-60,000 ppm, Other gases: 1-60,000 ppm, 02: 60 ppm - 100,000 ppm, N2: 500 ppm - 100,000 ppm : 1050 mm 3. TECHNICAL DESCRIPTION Gas chromatograph for testing insulating oils using the DGA (Dissolved Gas Analysis) method, for field and laboratory applications. The laboratory version includes a shaker. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay. The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. The condition is very good. We have two identical, fully functional units. If you purchase both, the price of one will be 50% lower. Ncodpezcmblsfx Ag Usw Before purchasing, I recommend inspecting and testing the equipment on-site (performing a test). The last test was performed on November 21, 2025, and compared with another MYRKOS device (the test was verified in a certified laboratory). Available for viewing in Rzeszów.

Year of construction: 2003, condition: used, Technical details: Nsdpfx Agou Nvb Ie Uecw rated capacity: 175 kVA flow rate: 100 m³/h revolution per minute: 1500 U/min connection voltage: 400 V dimensions L x W x H: Container: 3,0 x 2,6 x 2,6 m Gas purification plant incl. container Application: For purification of sewage gases from organic silicon compounds and hydrogen sulfide. Gas pressure boosting plant make Muche GmbH Scope of delivery ivated carbon filter Cooling Danvoss; air consumption 2.800 m³/h; refrigerant R 134a Heat exchanger Renzmann&Grünwald Condenser ID Compressor MTZ22-4VI control cabinet incl. documentation, for sale as is. *

Year of construction: 2019, condition: new, Wraparound heat-shinkable Ncjdpfx Agsih R Icj Uew MIS - 65 1120 - 650 CW BK/T SP 127030 - 12200650026-040 Prize per unit carton

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: C230-210ECO, Equipment: type plate available, Very good condition, little used. Njdpfxjw Iv Rms Ag Uocw

Year of construction: 2003, condition: good (used), Weishaupt gas burner Monarch Burner type G7/1-D Version ZMD Power 300 - 1750 KW Nodpfx Asmdpczeg Uecw Including gas line ( gas fitting ) Burner was recently in operation

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 570 kW (774.98 HP), overall weight: 4,000 kg, type of input current: three-phase, pressure: 6 bar, temperature: 120 °C, Equipment: documentation/manual, hot water, type plate available, Mobile oil-fired heating system in a 20-foot container – Buderus 570 kW / Weishaupt burner – Year of manufacture 2023 (can also be converted to gas operation) We are selling our mobile oil-fired heating system because we have switched to solar energy. This system served as an emergency or supplementary heating system for us, is 100% ready for operation and is sold as is – including stainless steel chimney, electrical distribution panel and complete interior fittings. Technical data: Boiler: Buderus Logano plus GE615, output 511–570 kW (rated output), max. 120 °C, 561 l water content, PMS 6 bar Burner: Weishaupt WM-L10/3-A monarch, T-3LN multiflam®, year of manufacture 2023, heating oil EL (200–900 kW), NOx class 3 Power supply: 230 V / 400 V, 50 Hz, protected by Hensel main distribution panel (3x63 A) with CEE connections Container: 20-foot standard container (approx. 6.06 × 2.44 × 2.59 m), approved for road transport, insulated and equipped with lighting Stainless steel chimney mounted externally, tensioning cables included Complete internal piping with insulation, circulation pumps, water treatment Flexible in terms of fuel: The Buderus GE615 is a condensing oil/gas boiler and can be converted to gas operation with a single adjustment (replacement or modification of the burner) – perfect for locations with a gas connection. Possible applications: Nedpfx Agsy Sz Rus Uecw Ideal as a mobile large-scale heat source for construction projects, larger building complexes (e.g. as interim heating until the final heating system is commissioned), heating for large halls or for supplying hot water to larger projects. After connecting the piping or via hoses to the existing taps, it is immediately ready for operation. Procedure: The piping will be disconnected from the tap by us. Afterwards, the container can be picked up with a suitable truck (container transport) and set up at the new location. For commissioning (and possibly conversion to gas operation), we strongly recommend involving a qualified plumbing/heating specialist so that all settings on the boiler and burner can be made professionally. Original purchase price 2023: approx. 150,000 € Selling price: 65,000 € negotiable – serious offers are welcome, just write to us. Inspection possible at any time by appointment. If you have any questions, please do not hesitate to contact us!

Condition: good (used), Details on request Ncjdpfx Aofin Rfog Ujw

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) 2) Construction & Materials Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) 3) Performance (indicative / to be confirmed by serial datasheet) PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Nedpfxoyhxpps Ag Uecw Large flow industrial HVAC networks

Condition: ready for operation (used), Nominal power: 468.2kW, max. temperature: 100°C, capacity: 59l, length: 1870mm, width: 845mm, height: 1460mm, weight: 465kg, was maintained regularly. Nedpfx Agomt Efne Ujcw

Condition: good (used), Year of construction: 1995, Engine: JGC312 with 551 kW (year 1995) - Turbocharger overhauled 4,000 hours ago - Additional oil cooler – 3 years old Ncjdpfx Agevcm Nfs Uow - Cylinder head – new in 2017 - Charge air cooler overhauled 4,000 hours ago - Exhaust manifold – new in 2021 - Complete engine overhaul in 2017 Offer is made without guarantee of availability.

Year of construction: 2015, condition: excellent (used), Hot air generator Brand: Airpool Year of manufacture: approx. 2015 Type: B23 Model: PKA 140N-10A AIRFLOW at 15°C: 10,500 m³/h Njdpfxogv Aulo Ag Uscw