Vertical Turret Lathe - Double Column
RAFAMET KCF 320 / 350

Name: RAFAMET KCF 320 / 350
Brand: RAFAMET
Availability: InStock

Year of construction

2000

Condition

Used

Location

Ennepetal

Vertical Turret Lathe - Double Column RAFAMET KCF 320 / 350

Show map

Machine data

Machine type:: Vertical Turret Lathe - Double Column

Manufacturer:: RAFAMET

Model:: KCF 320 / 350

Year of construction:: 2000

Condition:: used

Price & Location

Seller location:: Scharpenbergerstr. 96-98, 58256 Ennepetal, Germany

Call

Details about the offer

Listing ID:: A168-78661

Reference number:: 2065-AS2025

Update:: 19.01.2025

Description

faceplate diameter 3200 mm
swing diameter 3500 mm
turning height 2200 mm
range L-W-H 7730 x 6240 x 6700 mm
control Typ 840 D sl
voltage 3 x 400 V
frequency 50 Hz
turning speeds 0,8 - 40 U/min
max. turning diameter 3500 mm
total power requirement 51 kW
weight of the machine ca. 86 t
Technical specifications
Machine type: CNC vertical lathe
Manufacturer: Rafamet
Year of manufacture: 1973 conventional
General overhaul with control retrofit 2010
Control upgrade 2016
Control: Siemens 840 D Sl
Condition: very good

faceplate
Turning diameter of the faceplate 3,200 mm
Number of rotation stages of the face plate 3 (infinitely variable)
Speed ??ranges of the faceplate 0.8 - 40 rpm
Level I 0.8 – 3 rpm
Level II 0.8 - 11 rpm
Level III 0.8 – 40 rpm

processing of workpieces
Max. turning diameter 3,500 mm
Max. turning height of the workpieces above the faceplate 2,200 mm

vertical supports
Smallest axis distance between the vertical supports 470 mm
Largest ram travel of the left vertical support 985 mm
Largest ram travel of the right vertical support 985 mm
Axis Feeds - Infinitely variable feed
Max.: X1.2 3m/min
max.: z1.2 2.5 m/min
Plunger cannot be pivoted

Support — crossbar
Rapid feed of the cross beam 600 mm/min
Larger distance of the cross beam to the faceplate 2,300 mm

load sizes
+Permissible turning force when turning workpieces with a
turning diameter of 2,000 mm and a turning speed
of 20 m/min. 8,000kg

+Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm²
at a turning speed of 20 m/min for all supports 45 mm²

+Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm²
at a rotation speed of 20 m/min for a vertical support
with max. plunger length 985 mm 2.5 mm²

+Largest chip cross-section for cast iron workpieces HB = 160 kg/mm²
at a turning speed of 20 m/min for all supports 120 mm²

+Largest chip cross-section for cast iron workpieces HB = 160 kg/mm²
at a rotation speed of 20 m/min for a vertical support
with max. plunger length 985 mm 22.5 mm²

+Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg

+Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg

electric motors
Main drive motor power and revolutions 51 kW
Power of the feed motors of:
- Vertical support beam (2 pieces) 16 Nm (gear 1:10)
- Tappet (2 pieces) 16 Nm (gear 1:12)
Power and revolutions of the drive motor
of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm
Power and revolutions of the clamp hydraulic motor
of the vertical support beam 1.5 kW - 1,500 rpm
Power and rotation for crossbar adjustment 15 kW - 1500 rpm

3.5 Information on the compressed air supply and other consumables
Compressed air connection: 6 bar free of oil and water

3.6 Energy Consumption Conditions
Voltage: 3 x 400V
Control Voltage: 24V
Frequency: 50Hz
Njdouddcgjpfx Ah Njcr
Fusing: 315 A
Main dimensions and weight of the machine
Length 7,730mm
Width 6,240mm
Height: 6,700mm
Weight: 85,750 kg

Tool:
Capto 60 recording
Not powered

front panel

Turning diameter of the front plate 3,200 mm

Clamping disc diameter 3,400 mm

Number of rotation levels of the front panel 3 (continuously adjustable)

Front panel speed ranges 0.8 - 40 rpm

Level I 0.8 - 3 rpm

Level II 0.8 - 11 rpm

Level III 0.8 - 40 rpm

processing of workpieces

Max. turning diameter 3,500 mm

Max. turning height of the workpieces above ...

Seller

Registered since: 2007

533 listings online

Call

Send inquiry

Telephone & Fax

+49 2333 ... show

Fax:

These listings may also fit your interest.

Listing

Floor Type Boring and Milling M/C - Hor. UNION BFP 130/6

Germany

7,963 km

Floor Type Boring and Milling M/C - Hor.
UNIONBFP 130/6

Call

Condition: used, Technical details: spindle diameter: 130 mm drill depth: 1380 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 380 mm w-axis: 900 Bohrspindelvorschub mm U-axis: 320 Planschiebervorschub mm control: auf Wunsch tool taper: ISO SK50 revolution per minute: Planschieber:4,5-180 U/min rpm - drive spindle: 4,5-900 U/min feed:: x/y: 5-2000 total power requirement: ca. 40 kW weight of the machine ca.: ca.< 35 + AZusatzeinrichtungen t The machine can be offered in 4 different sales options. Please choose! 1. the machine is in mint mechanical condition. As is/is. 2. the machine as is/is incl. plate field 4000x2000x300mm = stock no. 1101081 3. the machine is newly wired, with new electrical cabinet, digital display, with 4-axis, AC drives from Siemens, axis motors from Siemens (50A/31Nm) with 12 months warranty on all new parts. 4. further additional equipment can be offered as an option. Such as coolant system, chip conveyor, enclosure etc. We should discuss this on the table with your technical staff. i.D. Ncjdpfxevr S Ule Ah Nsr *

See details

Listing

Bacău

9,112 km

Vertical turret lathe
REMSC 35 CNC 1S

Call

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.500 2. Min. machining diameter mm 0 3. Max. height of the part mm 3.000 4. Max. load on the table to 30 5. Table diameter mm 3.000 6. Table speed range rpm 2 ÷ 130 7. Main AC motor - turning kW 100 8. The maximum torque of the faceplate in turning mode Nm 105.000 9. Ram vertical stroke (Z axe) mm 1.750 10. Turning ram cross section mm x mm 300x300 11. Horizontal stroke –X axe mm 2.000 12. Feed range (X and Z axe) mm/min 1 ÷ 6000 13. Rapid traverse (X and Z axe) mm/min 8.000 14. Feed motor torque (X and Z axe) Nm 22 18. Vertical stroke of the cross rail mm 2.700 CNC Equipment 1. Equipment type Fanuc Overall Dimensions 1. Floor space m 8.5 x 6 2. Max. height of the machine m 8.2 3. Max. height over floor level m 7.4 3. Machine weight to 89 Nedpfxjtpnlws Ah Nocr Tool Magazine 1. Number of tool magazines - 1 2. Number of tools/magazine - 16 3. Feed motor torque with encoder Nm 12 4. Tool change time sec. 25 5. Maximum weight of the tool holder - for turning daN 100 6. Maximum length of the tool holder - for turning mm 600

See details

Listing

Lathe Ø 2000 x 35,000 mm x 63 tons SKODA SUT 200 TD

Denmark

7,496 km

Lathe Ø 2000 x 35,000 mm x 63 tons
SKODASUT 200 TD

Call

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Ncjdpfx Ahjynky Ao Nor Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

See details

Listing

Table Type Boring and Milling Machine UNION T 125/1

Hilden

7,668 km

Table Type Boring and Milling Machine
UNIONT 125/1

Call

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm table surface area 1.000 x 1.250 mm w-travel 550 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min Ncjdpfjwdta Eox Ah Nor feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

See details

Listing

Manlleu

7,933 km

Table boring mill
JuaristiTX3 S

Call

Condition: like new (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle diameter: 130 mm, spindle speed (min.): 3,000 rpm, spindle speed (max.): 3,500 rpm, table length: 2,500 mm, table width: 2,500 mm, travel distance W-axis: 800 mm, workpiece weight (max.): 20,000 kg, drill spindle length: 800 mm, position of the milling head: 2.5 x 2.5º, CNC HORIZONTAL BORING MACHINE JUARISTI TX3 - S TECHNICAL SPECIFICATIONS Brand: Juaristi Model: TX3-S CNC: Heidenhain iTNC 530 X axis: 6000 mm Y axis: 2500 mm Z axis: 2500 mm W axis: 800 mm Spindle diameter: 130 mm Max speed: 3000 rpm Tool magazine: 60 positions Taper: ISO 50 Automatic milling head: 2.5 x 2.5 mm High-precision rotary table: 360,000° Table capacity: 20 tons Chip conveyor Internal cooling PRICE AND FURTHER INFORMATION ON REQUEST Ncjdpfjyckq Djx Ah Nsr (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

See details

Listing

CNC press brakes KK Kletzer CNC Abkantpresse KKI EUROPA XL 3020 mm x 320 to, Y

Austria

8,383 km

CNC press brakes
KK KletzerCNC Abkantpresse KKI EUROPA XL 3020 mm x 320 to, Y

€79,591

EXW ONO plus VAT

Call

Condition: new, pressure: 320bending length: 3020column width: 2555daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 3785x2290x3100weight approx.: 14.4504 axes (Y1, Y2, X, R): Ja alle Achsen über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Bombierung Steuerung Esa S630 (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Nedpfx Asd Ehikeh Njcr

See details

Listing

Vertical Turret Lathe - Single Column UMARO SCM 63/100

Germany

7,870 km

Vertical Turret Lathe - Single Column
UMAROSCM 63/100

Call

Condition: used, faceplate diameter 4770 mm swing diameter 10000 mm turning height 3500 mm table load 100 t turning speeds 40 U/min table drive 125 kW Control Siemens type 840 D Rest 1 slide adjustment 1421 mm ram head dimension 250x250 mm inclination +/-30 ° live tooling 16 Kw spindle taper ISO 50 spindle turning speed range 3000 U/min total power requirement 150 kW Machiney Refurbished 2003 Table extension up to 8000 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Njdpoyrhufefx Ah Njcr please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

See details

Listing

Vertical lathe from 3,000 to 10,000 mm aepi

Torbole Casaglia

8,223 km

Vertical lathe from 3,000 to 10,000 mm
aepi

Call

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning height: 5,000 mm, workpiece weight (max.): 50,000 kg, turning diameter over cross slide: 10,000 mm, feed length X-axis: 3,600 mm, feed length Z-axis: 1,300 mm, total height: 8,000 mm, total width: 12,800 mm, total length: 5,800 mm, rotary table diameter: 3,400 mm, spindle speed (min.): 1,200 rpm, travel distance Z-axis: 1,300 mm, stroke length: 4,450 mm, overall weight: 80,000 kg, power of the servo motor: 100,000 W, VERTICAL LATHE CNC FAGOR 8055. Double RAM, C axis. Turning diameter from 3,000 to 10,000 mm. Turning height 5,000 mm. Crossbeam travel 4,450 mm. Vertical RAM travel Z 1,300 mm. RAM cross-section 240x240 mm. RAM cross travel X 3,600 mm. Left-side turning RAM with tool turret. RAM with drilling/milling spindle ISO 50 taper. Drilling spindle speed 1,200 rpm. Table: diameter 3,400 mm, table travel 2,550 mm, hydrostatic table max capacity 50 tons. Main motor 100 kW. COMPLETE WITH: automatic tool changer, electronic handwheel, access stairs and balcony for the operator, jaws/extensions for clamping large-diameter parts. Overall dimensions: 12,800x5,800x8,000 mm. Weight approx. 80,000 kg. USED MACHINE REFURBISHED BY AEPI IN 2013 (1,800 working hours). Nodpfx Ahoydd Npe Njcr

See details

Listing

Ram-Type Floor Boring and Milling M/C SCHIESS- FRORIEP 1 FB 180

Dorsten

7,640 km

Ram-Type Floor Boring and Milling M/C
SCHIESS- FRORIEP1 FB 180

Call

Condition: used, Year of construction: 1972, spindle diameter 180 mm x-travel 8000 mm Ncodpfxoyqv Evs Ah Nsr y-travel 4000 mm Control Siemens type Sinumerik System 3 ram: horizontal adjustment 800 mm Spindle travel W-axis 1400 mm ram: diameter 220 mm engine output 75 kW turning speeds 900 U/min Plate area 8000x6000 mm Overhauled in 1983 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

See details

Advertise here