Used universal drilling machines for sale (45)

Condition: used, machine/vehicle number: 008342, Max. panel width: 70 mm Max. panel length: 2100 mm No of injectors: 4 Lateral horizontal groups: yes Chedpjx A Tc Ujfx Agtjb

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Lateral horizontal groups: yes Chsdpfx Ajwuz S Dogteb

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm Csdpfsyfta Tex Agtshb 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: used, machine/vehicle number: 008727, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 8 No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes Cjdpfxezylv Uj Agtshb

Condition: used, Vertical drilling machine with 2 adjustable spindles. Maximum drilling width 440 mm Minimum drilling width 250 mm Cedezxg Dwjpfx Agtjhb Maximum depth 250 mm Engine power hp. 2

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements Cjdpfx Agjwd Rlfjtohb L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Chedpfx Aezuynhsgtsb Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1975, Number of spindles: 20 Drill spacing: 32 mm Power consumption: 1.8 kW Chjdpfx Aoy E Hfkjgtob

Condition: used, machine/vehicle number: 008687, Max. panel width: 1000 mm Chsdezmmt Iepfx Agtjb Max. panel length: 2500 mm No of Bottom Units: 8 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008692, Max. panel width: 3000 mm Chodpjznkqmofx Agtjb Max. panel length: 1300 mm No of Top Units: 1 No of injectors: 1 Positioning of Units by NC: yes

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Chedpfswhuu Eex Agtob Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: excellent (used), Year of construction: 2011, I sell the universal top multiple boring machine with milling for repair works Plug Repair RILESA Rep.-Borem., year 2011. 4 Top drilling spindles 1 Grooving moulding head Very good condition. Chjdpou N T Sksfx Agtsb Available immediately.

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Cedoxc Hi Uopfx Agtjhb Drill pitch: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: good (used), Year of construction: 1994, Used Jago K 21 PN dowel drilling machine Year of manufacture 1994, Machine No. 1178 For drilling cabinets, frames, fittings, and line holes in the 32 system Technical specifications Number of spindles: 21 Center distance between drill heads: 32 mm Tool holder shank: 10 mm Max. workpiece size: 880 x 2500 mm Max. workpiece height: 100 mm Max. drilling depth: 83 mm Support table size: 940 x 410 mm Number of pressure cylinders: 2 2 side stops, approx. 1000 mm each Chsdpfswlgpcjx Agtsb 1 stop extension, approx. 1500 mm each Required air pressure: 6-8 bar

Condition: used, machine/vehicle number: 008601, Max. panel width: 3200 mm Max. panel length: 1000 mm Csdszbrnhepfx Agtshb No of Bottom Units: 6 No of Top Units: 4 Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007202, Max. panel width: 2500 mm Max. panel length: 1000 mm Cedpfx Agju Rv Ukotjhb No of Bottom Units: 3

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Chsdpfx Aot Hmt Iogtob Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007803, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 4 Positioning of Units by NC: yes Chodjyhbhwepfx Agtjb Lateral horizontal groups: yes

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Horizontal drilling machine gomad unit one piece horizontal drilling .Net price fv.Year of production 2004 very good condition machine operational and complete Cjdpfx Ajtxabwjgtshb

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Csdpfxewv Nb No Agtehb Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling

Condition: used, machine/vehicle number: 008406, Max. panel width: 1000 mm Max. panel length: 2500 mm No of injectors: 12 Chedpfjyl Ihxsx Agtsb

Condition: excellent (used), Drilling depth 14 cm Drilling height 14 cm Csdpfx Asupz Tzsgtshb Drilling width 23 cm 2 kW motor Very good condition.

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Chjdjv S Diuopfx Agtjb Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Condition: as good as new (ex-display), Year of construction: 2025, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 180 mm Slot length: 240 mm Height adjustment range: 160 mm Motor power: 2.2 kW Chjdpsv N Tyqjfx Agtsb Speed: 3000 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 260 kg

Condition: used, machine/vehicle number: 008606, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 5 No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes Chjdszqz Rcjpfx Agteb