Used throughfeed drilling machines for sale (70)

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AB00029039, feed length X-axis: 3,050 mm, feed length Y-axis: 900 mm, feed length Z-axis: 60 mm, input frequency: 50 Hz, input current: 31 A, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, working width: 900 mm, total width: 2,159 mm, total length: 3,459 mm, total height: 1,500 mm, SCM Startech CN Plus R F23L CNC drilling, grooving and routing centre, manufactured in Italy in 2023. The machine is currently installed in Pejë, Kosovo, and can be inspected under power by prior appointment. Machine identification: - Manufacturer: SCM - Model: Startech CN Plus R F23L - Year of manufacture: 2023 - Serial number: AB00029039 - CE version - Machine weight: 1,383 kg Main equipment: - F23L drilling head - 13 independent vertical drilling spindles: 7 in X and 6 in Y - 10 horizontal drilling spindles: 6 in X and 4 in Y - Drilling motor power: 2.2 kW - Drilling spindle speed: 4,200 rpm - 5.5 kW vertical electrospindle for routing operations - Electrospindle speed: 1,000–18,000 rpm - ER32 collet with manual tool change - Maximum routing tool diameter: 20 mm - Integrated grooving saw in the X direction - Maximum saw blade diameter: 125 mm - Saw blade speed: 5,500 rpm - Automatic workpiece positioning and side alignment - Centralised lubrication system - SCM Maestro CNC software with Hicam machine interface - PC control with 19-inch display - Barcode program support - Uninterruptible power supply unit (UPS) - Additional Maestro CNC hardware key Working capacity: - Maximum panel dimensions: 3,050 × 900 × 60 mm - Minimum panel dimensions: 200 × 80 × 10 mm - Maximum axis speed X/Y/Z: 40/40/10 m/min - Maximum vertical drilling depth: 30 mm Installation data: - Electrical supply: 400 V, 3+N, 50 Hz Dsdpfs Afnhhjx Apiecp - Input current: 31 A - Installed power: 20.7 kVA - Compressed-air consumption: 50 Nl/min The machine is used, fully functional and available for demonstration under power. Availability: by arrangement. Sale basis: EXW Pejë, Kosovo. Dismantling, loading and transport can be arranged separately. Further technical information, documentation and an operating video are available on request.

Condition: excellent (used), CNC Flexible and Full Automatic through-feed DRILLING LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CDL Dcjdjzxn N Ispfx Apijp B) 1° Motorized Roller table "MAHROS" with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) S - N° 6 mobile consoles (workbenches) controlled by CN on the X-axis - N° 4 upper drilling units - N° 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" with 90° motorized belts (from longitudinal to transverse) F) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SDL, with "WANDRES" panel cleaner

Condition: excellent (used), CNC Full Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Author 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 912: mm 100 /1000 (o 500+500) 238400A) Loader (Bridge Frame) "MAHROS" single station, Mod. Runner 238400B) Connection transfer unit, with tilter (180°, up-side-down) "MAHROS" Mod. Rib 238400C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 912 - N.2 Vertical electro-spindles (on the Y-axis) for fittings - N.2 upper drilling units, each consisting of: - 2 vertical 36-spindle heads (72 in total per unit) - 1 vertical 14-spindle heads (on the Y-axis) for fittings - 2 horizontal spindles (4 in total per unit) on the Y-axis Dedpjzx R Akefx Apiocp - N.2 heads with 3 vertical spindles (for hinges) - N.2 horizontal units (1 R + 1 L) with N.2 21-spindle heads (21 + 21 = total 42) per unit 238400D) Stacker (Bridge Frame) "MAHROS", single station Mod. Runner

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-250-75-2227, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine by HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Dcjdpfjzvxz Aox Apijp Year: 2020 Workpiece length (X): 200mm to 2500mm Workpiece width (Y): 70mm to 850mm Workpiece thickness (Z): 12mm to 60mm Safe clamping system protects delicate panel surfaces Power supply: 400V (3 phases), 50Hz

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0540, Machine Description: We offer for sale a brand-new machine that was purchased for a specific project. However, this project was not carried out, and as a result, the machine has remained unused since its acquisition. The unit is in perfect technical and visual condition, meeting the manufacturer's specifications. The machine is stored under appropriate conditions, in accordance with the manufacturer's recommendations. The purchase was made from an authorized distributor, which confirms the authenticity of the unit. The machine has never been used in production, making it an exceptional value compared to new equipment. Technical Data: - Capacity: 10 parts per minute (3000-6000 parts per shift) - The machine has a parts magazine, which significantly facilitates operation. - Parts are transported from the magazine using a chain. - The machine performs drilling from 5 sides simultaneously (from the bottom, top, back, left, and right). - The drill can be widely configured, including customized heads, and the addition or removal of units. TECHNICAL SPECIFICATION: - Panel length: 300 – 2500 mm - Panel width: 30 – 250 mm - Panel thickness: 8 - 40 mm Number of lower drilling units: 4 Number of upper drilling units: 4 Number of rear drilling units: 4 Number of horizontal left and right units: 1 x left, 1 x right Drill weight: 3250 kg HORIZONTAL HEADS (LEFT AND RIGHT) - Number of heads: 1 x left, 1 x right - Spacing: 32 mm - Number of spindles: 9 left head, 9 right head - Maximum drilling depth: 40 mm VERTICAL LOWER HEADS - Number of heads: 4 - Spacing: 32 mm - Number of spindles: 3 or 5 - Depending on the selected head - Maximum drilling depth: 40 mm VERTICAL UPPER HEADS - Number of heads: 4 - Spacing: 32 mm (Depending on the selected head) - Number of spindles: 8, 9, 11 - Depending on the selected head (3 heads in a special configuration) - Maximum drilling depth: 40 mm Dcedpfx Ape Agfr Neisp HORIZONTAL REAR HEADS - Number of heads: 4 - Spacing: 32 mm - Number of spindles: 11 - Maximum drilling depth: 40-70 mm

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line. Dcodpfezyrpnjx Apisp

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-8843, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine from HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Dedpfx Apszvx Ucjiecp Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Year of manufacture: 2022 Workpiece length (X): from 200mm to 2500mm Workpiece width (Y): from 70mm to 850mm Workpiece thickness (Z): from 12mm to 60mm Safe clamping system to protect delicate surfaces Power supply: 400V (3 phases), 50Hz

Condition: good (used), Year of construction: 2011, functionality: fully functional, feed length X-axis: 2,500 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 60 mm, Technical description of the machine The machine is designed for the precise machining of furniture and carpentry components using multi-spindle drilling technology. Thanks to its large working area and CNC control, it provides high productivity, repeatability, and accuracy in production. Operating parameters Maximum width of the workpiece: 2,500 mm Maximum working depth: 1,000 mm Maximum height of the workpiece: 60 mm Drilling grid: 32 mm Infinitely adjustable feed rate, allowing for optimal parameter adjustment to the type of material. Drilling system The machine is equipped with: 7 vertical drilling heads 7 bottom-mounted drilling heads 2 horizontal drilling heads 2 drilling blocks per head, enabling the simultaneous execution of multiple operations. The positioning of the blocks and drilling heads is manual, while the drill feed is pneumatic, ensuring a fast and repeatable work cycle. Clamping system 7 clamping bridges guaranteeing stable clamping of the workpieces during the entire machining process. Control The machine operates under the control of: HOMAG POWER CONTROL Dodjzi E Ebspfx Apiscp HOMAG WOODWOP software, which enables intuitive programming of operations and integration with the production process. Electrical data Total connected power: 49 kW Additional information CE marking for conformity. The machine’s design ensures high drilling accuracy and reliability in the serial production of furniture components, fronts, bodies, and other wood and wood-based components. Thanks to its large working area and extensive drilling system, the machine is ideally suited for both single-item and large-scale production.

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Dsdsylp Slopfx Apiecp Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2004, I sell the throughfeed drilling machine with BIESSE TECHNO FDT. Year 2004 Working area: X: 215 - 32.000 mm Dcjdpfxoi U Apmo Apisp Y: max. 672 mm (horizontal spindles 24 pcs. per 32mm offset) Z: Workpiece thickness: 9 - 65 mm min. X middle distance between vertical units: 96 mm Configuration: 4+4 motors from under 1 bottom jumping milling unit 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 4+4 motors from top 4 pcs. material pressure from top Very good condition. Available immediately. One more BIESSE TECHNO FDT in different configuration available from line. Price on agreement.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Equipment: CE marking, Through-feed drilling machine, CNC controlled, with drilling heads on the right, left, 4 above, and 7 below. Dsdpfx Aey U H R Eepiocp

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Vitap Sigma 2TAS through-feed drilling machine Dcedpj Agvm Hjfx Apisp 3 vertical drilling units, each with two drilling heads 2 front-mounted lateral spindles Spindle spacing 32mm Maximum workpiece length 2500mm, minimum 240mm Drilling depth up to 70mm Pneumatic workpiece clamping Year of manufacture 2005 CE marking Machine weight 1600kg Dimensions 390x180x145cm (H)

Year of construction: 2009, condition: excellent (used), I sell the throughfeed CNC drilling machine HIRZT Livra/B, Year 2009. Working width up to 820mm Configuration: 14 + 6 + 2 pcs. drilling units Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Total area covered: 2000 x 2000 (+800 +800mm) Total weight: 1350 kg. Dcedjnxqdwspfx Apiop With full documentation and CE. Very good condition. Available immediately.

Condition: excellent (used), functionality: fully functional, bottom heads 2x 22 spindles side head 21 spindles spindles span 32mm Dsdpfjz D Ac Dex Apijcp 3 pneumatic clamps pneumatic setting of heads working dimensions 2400x1200mm

Condition: excellent (used), functionality: fully functional, two bottom heads one side - right head heads with 21 spindles spindles span 32mm motors 3x1,1kW Dedjz D Acwspfx Apijcp 2 pneumatic pressure regulation of span between heads right/left spindles

Condition: excellent (used), CNC Flexible FULL Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling Djdpfx Apozxc Ncsiocp A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: good (used), Year of construction: 1998, functionality: fully functional, Weeke through-feed drilling machine BST 500, with drilling heads on the right and left sides, 5 units underneath, none above. 5 drilling machines in stock, sold individually. Dsdpfxszb El Ho Apijcp

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0 - 250 - 04 - 0558, Technical data : X working area 2,500 mm Working area Y 800 mm Z working area 40 mm Number of milling spindles 2 Vertical drilling spindles 16 Drilling spindles in X axis 2 Drilling spindles in Y axis 1 Vacuum pump Machine table traverse table Dcedpfx Aerwmwfspiep Weight approx. 3,500 kg CNC drilling and milling center WEEKE BP 10 , built in 1991. Panel area 5,200 x 1,500 mm. Machining area 2,500 x 800 mm, 16 vertical drilling stations, 1 keyway saw, 2 milling units, support plate handwheel and hydraulic unit. In 2016 he switched to Linux CNC 3D - new computer, new monitor, new software.

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. Dodpfezwg Tiox Apijcp The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: good (used), Year of construction: 1998, functionality: fully functional, number of spindles: 35, Multi-spindle drilling machine (dowelling machine), model from the Vitap Alfa 35 series. [1, 2] This type of machine is used in the furniture industry for precise linear drilling of holes for dowels (axes), shelves, connecting elements, and fittings in wooden panels (chipboard, MDF, solid wood). [1] The main features of the machine in the image: Drilling head with 35 spindles: The long, green support arm (drilling spindle) has 35 parallel spindles with a distance of 32 mm between them (standard system for furniture). The drill bits alternate in a left-hand Dcjdpfx Ajz Ef R Tepisp

Year of construction: 1997, condition: excellent (used), I sell the drilling machine with cutting saws COMEC FM0V8 2000, Year 1997. Working width up to 2000mm Configuration: 0 motors from under 1+1 motors from sides / angular adjustable 2 motors from back / heads angular adjustable 2 motors from top / heads angular adjustable 4 pcs. material pressure from top 2 pcs. cutting saw aggregates / heads angular adjustable Atypic 5-spindle drilling heads included 3 x 15mm / 2 x 25mm. Dcedsh H S Hwjpfx Apiep Drilling heads in price. Very good condition. Available immediately.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-6869, * Drilling head with 8 spindles (V8 SW/32) * Horizontal drilling head with 4 spindles on the X-axis * Horizontal drilling head with 2 spindles on the Y-axis * Groove saw, D=100 mm (X-axis direction) * Clamping cylinder for positioning the workpiece * Workpiece clamping system * Workpiece length 2500 mm Dodpfx Aovtyc Hjpiecp * Workpiece thickness 12-60 mm * WOODWOP for the machine * WOODWOP IMPORT DXF BASIC (1 license)

Condition: excellent (used), Year of construction: 2012, I sell the throughfeed drilling machine Rilesa Rapid 1500, Year 2012. Working width up to 1500mm Configuration: RAPID 2200: 1+1 motors from sides 3 motors from top Entry feeding magazine for elements. Backfeeding system of conveyors to return the elements to the operator. Very good condition. Available immediately. Djdpfxjt Rrn Es Apiecp

Condition: excellent (used), functionality: fully functional, 6 drilling units with two heads two side heads spindles span 32mm max material length 2250mm magazine feeding manual regulation of units span rotated heads pneumatic top pressure Dcodpfx Ajz D Ac Rjpiop drilling depth regulation

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Facom foratrice Through-hole drill f-v3r-2l-3f+2tagr1 used 2015 Brand: Facom foratrice Model: Through-hole drill f-v3r-2l-3f+2tagr1 Description: Through-feed drill F-V3R-2L-3F+2TAGR1 All heads and saws are screw-adjustable with mechanical indicators. Drilling depth is controlled electronically. Dcsdpfx Apjx Rd Eleiop Minimum workpiece length: 300-350 mm Maximum: 2000 mm Automatic feeder Bsbtt Sov U Uw Ujx Nteda Double-sided cutting with angle adjustment Double-sided drilling with angle setting 3 drill heads top + 2 wheels + 2 rear All heads have angle adjustment Electronic position markers I can send a video via WhatsApp The machine is operational and connected; you can test it 2015 Year: 2015