Used Bernardo Bs 310 Dg for sale (222)

Condition: new, Bernardo Double-Column Bandsaw MBS 600 DG / 400 V Gujdpfxozibc Ao Achsd Technical Specifications Cutting capacity, round / square, 90°: 410 mm / 300 x 300 mm Cutting capacity, flat, 90°: 540 x 300 mm Cutting capacity, round / square, 45° (right): 400 mm / 260 x 260 mm Cutting capacity, flat, 45° (right): 400 x 210 mm Cutting capacity, round / square, 45° (left): 340 mm / 260 x 260 mm Cutting capacity, flat, 45° (left): 380 x 170 mm Cutting capacity, round / square, 60° (right): 260 mm / 175 x 175 mm Working height: 866 mm Bandsaw blade dimensions: 4290 x 34 x 1.1 mm Cutting speeds: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 2.2 kW Motor input power S6 40%: 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2340 x 1430 x 1460 mm Weight: approx. 606 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for blade tension • Bandsaw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Bernardo Dual-Column Bandsaw MBS 400 DG / 400 V Technical Specifications Cutting capacity, round / square 90°: 315 mm / 270 x 270 mm Cutting capacity, flat 90°: 400 x 250 mm Cutting capacity, round / square 45° (right): 280 mm / 280 x 280 mm Cutting capacity, flat 45° (right): 300 x 280 mm Cutting capacity, round / square 45° (left): 250 mm / 220 x 220 mm Cutting capacity, flat 45° (left): 280 x 200 mm Cutting capacity, round / square 60° (right): 180 mm / 140 x 140 mm Working height: 870 mm Saw band dimensions: 3460 x 34 x 1.1 mm Cutting speeds: 35/70 m/min Coolant pump: 100 W Motor output (S1 100%): 2.2 kW Motor input (S6 40%): 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2150 x 1400 x 1420 mm Weight: approx. 550 kg Scope of delivery • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Saw band guide with carbide inserts • Quick-release vice • Coolant system • Hydraulic lowering cylinder Guodpfx Aozibbxjchod • Motor protection switch • Automatic end stop

Condition: new, Bernardo Dual-Column Bandsaw MBS 300 DG-V PRO Technical Specifications Cutting capacity, round / square 90° 255 mm / 210 x 210 mm Cutting capacity, flat 90° 310 x 210 mm Cutting capacity, round / square 45° R 220 mm / 210 x 210 mm Cutting capacity, flat 45° R 220 x 200 mm Cutting capacity, round / square 45° L 230 mm / 200 x 200 mm Cutting capacity, flat 45° L 230 x 200 mm Cutting capacity, round / square 60° R 135 mm / 135 x 135 mm Cutting capacity, flat 60° R 135 x 135 mm Working height 930 mm Saw band dimensions 2750 x 27 x 0.9 mm Cutting speeds, infinitely variable 20 – 80 m/min Coolant pump 100 W Motor output power S1 100% 1.5 kW Motor input power S6 40% 2.2 kW Voltage 400 V Machine dimensions (L x W x H) 2000 x 1250 x 1900 mm Weight approx. 350 kg Scope of supply • Saw band • Workpiece stop • Base frame • Manometer for band tension • Saw band guide with carbide inserts • Quick-release vice • Coolant system Guedsd Hzbwepfx Ached • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Bernardo Semi-Automatic Double Mitering Bandsaw MBS 600 DGA-V / 400 V Technical Specifications Cutting capacity, round / square 90° 410 mm / 300 x 300 mm Cutting capacity, flat 90° 540 x 300 mm Cutting capacity, round / square 45° R 400 mm / 260 x 260 mm Cutting capacity, flat 45° R 400 x 210 mm Cutting capacity, round / square 45° L 340 mm / 260 x 260 mm Cutting capacity, flat 45° L 380 x 170 mm Cutting capacity, round / square 60° R 260 mm / 175 x 175 mm Working height 965 mm Bandsaw blade dimensions 4290 x 34 x 1.1 mm Cutting speed, stepless 20 – 80 m/min Coolant pump 100 W Motor output S1 100% 2.2 kW Motor input S6 40% 3.0 kW Voltage 400 V Machine dimensions (L x W x H) 2340 x 1430 x 1550 mm Weight approx. 686 kg Mode of operation, semi-automatic: • Hydraulic clamping of the vise • Hydraulic lowering of the saw arm • Raising of the saw arm Scope of delivery • Saw blade • Workpiece stop • Base frame • Manometer for belt tension • Saw blade guide with carbide inserts • Quick-release vise • Coolant system Guodpfezibdtex Achod • Hydraulic lowering cylinder • Motor circuit breaker • Automatic end stop

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo Gsdoza Hidspfx Acheud • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Condition: new, functionality: fully functional, input voltage: 400 V, roller diameter: 355 mm, overall weight: 640 kg, Equipment: CE marking, Semi-automatic band saw for cutting at angles from -45° to +60°. Stepless cutting speed and hydraulic vice ensure operator comfort. This model features a robust construction allowing for precise cutting of profiles, solid material, stainless steel, etc. Cutting capacity up to 530 mm. Key features: - Stepless adjustment of blade speed (20 / 70 m/min) - Blade guides equipped with special carbide plates and bearings for high cutting precision - Equipped with semi-automatic mode, ideal for series production - Ability to select cutting mode: manual or semi-automatic - Quick-release vice adjustable manually or hydraulically - Saw arm tilting range from -45° to +60° with scale indication - Fully professional machine with an excellent price-to-quality ratio - Solid construction guarantees accurate and quiet, vibration-free operation - Optimal power transmission thanks to a precise worm gear system - Saw arm adjustment via hydraulic cylinder Semi-automatic operation: - Hydraulic clamping vice - Hydraulic saw arm lowering - Saw arm lifting Technical specifications: Cutting range round 90°: 355 mm Cutting range flat 90°: 530 x 300 mm Cutting range square 90°: 300 x 300 mm Cutting range round 60°: 240 mm Cutting range square 60°: 170 x 170 mm Cutting range round 45° right: 355 mm Cutting range flat 45° right: 360 x 290 mm Cutting range square 45° right: 290 x 290 mm Cutting range round 45° left: 300 mm Gjdpfx Aoyt Huaocheud Cutting range flat 45° left: 270 x 270 mm Cutting range square 45° left: 270 x 270 mm Working height: 965 mm Cutting speed: 20 - 70 m/min Band saw blade dimensions: 3770 x 34 x 1.1 mm Blade width: 34 mm Coolant pump motor power: 0.1 kW Motor power: 3 kW Motor power S1 100%: 2.2 kW Voltage: 400 V Dimensions (W x D x H): 2200 x 1400 x 2050 mm Weight approx.: 640 kg Scope of delivery: - Band saw - Workpiece stop - Blade tension gauge - Quick-release vice - Coolant system - Hydraulic cylinder - Emergency motor stop - Automatic end switch - Base

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Godpfxoxablxe Achsud Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: new, Bernardo DG 32 Pro Drill Grinding Machine Specifications Drill diameter: 2 – 32 mm Point angle: 90° - 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of delivery • SBC diamond grinding wheel Gjdpfjgd H U Uox Acheud • ER 20 collets, 3 – 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, 20 pcs. (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • ER 20 or ER 40 collet chuck Features • Includes a setup for point grinding, i.e., improved centering of the drill tip on the workpiece and reduction of the required feed force • 30 ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes • Additional station for back-grinding the drill cutting edges (relief angle) • Universally adjustable point angle from 90° - 135° • Rotor with precision ball bearings ensures smooth running • Fast and precise working results due to simple operation • Vibration-free operation due to high inherent weight and rubber feet

Condition: new, functionality: fully functional, input voltage: 400 V, planing width: 310 mm, number of blades: 30, rotational speed (max.): 4,000 rpm, total length of planing tables: 1,300 mm, overall weight: 180 kg, Equipment: CE marking, Application of a helical cutterhead with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional straight knife cutterhead. The advantage of carbide inserts is that, in case of damage, individual knives can be replaced or rotated, which significantly reduces operating costs. Gedsyt I H Dopfx Achoud The carbide-tipped blades provide tear-free planing and optimal smoothness with every type of wood. Quick and hassle-free folding tables allow fast conversion to thicknessing mode. Integrated, tiltable chip extraction device - connection diameter 100 mm. Both tables are equipped with precision adjustment systems and noise-reducing covers. The planer table is centrally mounted on the guide column with a support bracket. Stable fence with prismatic guide, tiltable from 90° to 45°. Tables are made of cast iron with polished work surfaces. Cutterhead guard included. Technical Specification Voltage: 400 V Dimensions (W x D x H): 1300 x 900 x 1180 mm Weight approx.: 180 kg Planer Planing width: 310 mm Cutterhead speed: 4000 rpm Working height: 990 mm Number of knives/inserts: 30 pieces Cutterhead diameter: 75 mm Planing fence: 1110 x 130 mm Fence tilting range: 90° - 45° Max. chip removal in planer: 5 mm Planer table length: 1300 mm Thicknesser Thicknesser table length: 600 mm Thicknesser planing width: 305 mm Minimum workpiece height: 5 mm Maximum workpiece height: 180 mm Max. chip removal in thicknesser: 2.5 mm Feed speed: 8 m/min Dust extraction port diameter: 100 mm Motor power: 3 kW Motor power S1 100%: 2.2 kW

Condition: new, Bernardo fully automatic double column bandsaw BSM 330 NC Pro Technical specifications Cutting range round: 90° 330 mm Cutting range flat: 90° 330 x 330 mm Cutting range square: 90° 330 x 330 mm Working height: 635 mm Cutting speeds: (NC PRO) 20 - 80 m/min Saw blade dimensions: 4115 x 34 x 1.1 mm Coolant pump: 0.135 kW Hydraulic pump motor power: 0.75 kW Motor power: 4.0 kW Machine dimensions: (LxDxH) 2520 x 2280 x 1630 ( depth: 3690 with feed roller conveyor) Weight approx.: 1990 kg Scope of delivery: - Saw band Gsdpoqzhxiefx Acheud - Hydraulic vice, - Pressure gauge for band tensioning - Hydraulic saw band tensioner, - Hydraulic workpiece feed - Hydraulic workpiece feed, - Chip conveyor (NC Pro) - Coolant device, - Hydraulic lowering cylinder - Work light, - Delta frequency inverter (NC Pro) - Delta frequency inverter (NC Pro,) - Motor protection switch - Motor protection switch - Automatic limit switch - Cutting pressure regulation - PLC control Delta - Automatic belt breakage control - Hydraulic bundle tensioning device - Feed roller conveyors

Condition: new, sheet width 1020 mm plate thickness 2,0 mm daylight opening 48 mm bending angle max. 0 - 135 ° work height max. 900 mm total power requirement von Hand kW weight of the machine ca. 285 kg dimensions of the machine ca. 1350 x 820 x 1140 mm Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles Gjdpfxjxaaufe Achoud Scope of delivery : - Segmented upper cheek - Segmented lower cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Condition: new, capacity 90 degrees: round 100 mm capacity 45 degrees: round 65,0 mm capacity 90 degrees: flat 100 x 150 mm capacity 45 degrees: flat 60 x 100 mm dimensions of saw-band 1470 x 13,0 x 0,65 mm volt 230 V 45,0 m/min weight 26,0 kg Gjdoxaa Apspfx Achsud range L-W-H 700 x 320 x 420 mm scope of delivery - saw band - workpiece stop - Quick release vice - Ergonomic handle - Chip collector

Condition: new, sheet width 2065 mm plate thickness 1,20 mm daylight opening mit WZ 35,0 mm daylight opening ohne WZ 60,0 mm bending angle max. 0 - 135 ° total power requirement manuell weight of the machine ca. 520 kg. dimensions of the machine ca. 2400 x 1115 x 1150 mm - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for the production of high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam + bending beam - Foot clamp - Fixed stop for angle adjustment - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 Guodpfoxabvwsx Achod | 203 | 254 | 254 | 254 | 254 mm

Condition: new, cutting diameter 225 mm saw band length 2480 mm table height 910 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 160 x 160 mm capacity 60 degrees: round 100 mm capacity 60 degrees: square 100 x 100 mm turning speed range: 45/90 m/min dimensions of saw-band 2480x27x0,9 mm total power requirement 1,5 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1430x720x1700 mm Scope of delivery : - saw band Godpfx Acexaa Tbshsud - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off

Condition: new, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity, round, 90°: 225 mm Cutting capacity, square, 90°: 200 x 200 mm Cutting capacity, rectangular, 90°: 245 x 150 mm Cutting capacity, round, 45°: 160 mm Cutting capacity, square, 45°: 160 x 160 mm Cutting capacity, round, 60°: 100 mm Cutting capacity, square, 60°: 100 x 100 mm Working height: 910 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds, 400 V: 45 / 90 m/min Coolant pump, S1 100%: 100 W Motor output, S1 100%: 1.1 kW Motor input, S6 40%: 1.5 kW Voltage: 400 V Godpfx Ajd Du T Ijcheud Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight, approx.: 190 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for belt tension • Vise with quick-release mechanism • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Bernardo swivel bending machine with segmented upper and lower beam, TBS 1020 Working length 1020 mm Max. sheet thickness (400 N/mm2) 2.0 mm Max. opening width 54 mm Bending angle 0 – 135° Width 1350 mm Depth* 1115 mm Height 1170 mm Weight approx. 310 kg * with backstop Features Segmented upper and bending beam for a wide range of bending possibilities Gedpfx Aed Hxmtschoud Clamping via foot pedal, leaving hands free for optimal positioning of the sheet metal Universally applicable bending machine for sheet metal workshops and repair shops Robust construction with modern design Manual bending machine for standard bending tasks Optimal price-performance ratio Quick and easy bending process via handle Easy adjustment of the lower beam to the respective sheet metal thickness High upper beam for producing profiles with high hems Scope of delivery Segmented upper beam Segmented lower beam Backstop Bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Condition: new, Bernardo BSG 2040 PLC Surface Grinding Machine Technical Specifications Table surface area 200 x 500 mm Number/width of T-slots 1 / 14 mm Electro-magnetic clamping plate 200 x 460 mm Max. travel, longitudinal 560 mm Max. travel, transverse 240 mm Distance spindle center / table max. 450 mm Max. workpiece weight* 180 kg Grinding wheel 200 x 20 x 31.75 mm Table speed, hydraulic 7 - 25 m/min Transverse feed Automatic feed, transverse 0.1 - 8 mm / stroke Rapid traverse, transverse 990 mm/min Transverse feed per handwheel revolution 4 mm/rev Scale division on handwheel 0.02 mm Vertical feed Automatic feed, vertical 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm Rapid traverse, vertical 480 mm/min Vertical feed per handwheel revolution 2 mm/rev Scale division on handwheel 0.005 mm Grinding spindle motor 2.2 kW Spindle speed 2850 rpm Hydraulic pump motor 0.75 kW Vertical feed motor 0.5 kW Length 2160 mm Depth 1650 mm Height 1840 mm Weight approx. 1640 kg * with magnetic clamping plate Scope of supply • 2-axis digital display ES-12 H with LCD display • Siemens SMART panel IE V3 with touch operation • Electronic handwheel • Grinding wheel • Wheel flange • LED work light • Magnetic clamping plate • Balancing stand • Balancing arbour with protective covers • Parallel skimming device • Demagnetization device • Coolant system • Skimming diamond • Machine feet • Central lubrication • Operating tools Gsdpfx Ajgd Ia Sechjud

Condition: new, Bernardo HBS 460 N bandsaw - 400 V Technical specifications Cutting width 465 mm Cutting height 280 mm Saw band dimensions 3607 x 25 x 0.6 - 3 TPI Saw band widths 9.5 - 25.4 mm Cutting speed 420 / 840 m/min Table dimensions 480 x 630 mm Table height 970 mm Saw table tilt -5° to 45° Dust extraction port Ø 2 x 100 mm Motor output power S1 100% 2.2 kW (3.0 HP) Motor input power S6 40% 3.0 kW (4.0 HP) Voltage 400 V Machine dimensions (W x D x H) 1050 x 800 x 1950 mm Weight approx. 162 kg Scope of delivery Gjdpfxed N S Uro Achsud • Saw band • Rip fence with magnifying glass • Miter fence • Drive wheels made of aluminum • Ball-bearing saw band guide • Motor incl. brake • Push stick • Operating tools

Condition: new, Bernardo Horizontal Bandsaw HBS 275 PRO Technical Specifications Cutting capacity, round, 90°: 225 mm Cutting capacity, square, 90°: 200 x 200 mm Cutting capacity, rectangular, 90°: 245 x 150 mm Cutting capacity, round, 45°: 160 mm Cutting capacity, square, 45°: 160 x 160 mm Cutting capacity, round, 60°: 100 mm Cutting capacity, square, 60°: 100 x 100 mm Working height: 910 mm Saw band dimensions: 2480 x 27 x 0.9 mm Cutting speed: 45 / 90 m/min Coolant pump: 100 W Motor output, S1 100%: 1.1 kW Motor input, S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight, approx.: 180 kg Scope of delivery: • Saw band • Workpiece stop Guedpfxefigzze Achsd • Base frame • Manometer for band tension • Saw band guide with carbide inserts • Vise with quick-release mechanism • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic shut-off at the end of the cut

Condition: new, Bernardo Swivel bending machine with segmented upper and lower beam, TBS 1270 Working length 1270 Max. sheet thickness (400 N/mm2) 2.0 mm Max. opening width 46 mm Bending angle 0 – 135° Gusdpfjd Hxmysx Achsd Width 1600 mm Depth* 1115 mm Height 1150 mm Weight approx. 360 kg * with backstop Features Segmented upper and bending beam for a wide range of bending options Clamping via foot pedal, leaving hands free for optimal positioning of the sheet metal Universally applicable bending machine for sheet metal workshops and repair shops Robust construction in a modern design Manual bending machine for standard bending tasks Optimal price-performance ratio Fast and easy bending process via lever handle Easy adjustment of the lower beam to the respective sheet metal thickness High upper beam for producing profiles with high flanges Scope of delivery Segmented upper beam Segmented lower beam Backstop Bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 270 mm

Condition: new, Bernardo HBS 400 N bandsaw Cutting width: 410 mm Cutting height: 260 mm Saw band dimensions: 3345 x 25 x 0.6 - 3 TPI Saw band widths: 9.5 - 37 mm Cutting speed: 420 / 840 m/min Table dimensions: 450 x 560 mm Table height: 890 mm Saw table tilt: -5 to +45° Dust extraction port: Ø 2 x 100 mm Guodpfxod Tcake Achjd Motor output power: S1 100% 2.2 kW (3.0 HP) Motor input power: S6 40% 3.0 kW (4.0 HP) Voltage: 400 V Machine dimensions (W x D x H): 875 x 740 x 1740 mm Weight approx. 132 kg

Condition: new, functionality: fully functional, grinding length: 510 mm, grinding width: 250 mm, Reduced slip-stick effect thanks to plastic-coated x and y-axis guides. Gjdpoyt Hzmofx Achsud The longitudinal table guide is flat, while the transverse guide is triangular. Radial and axial forces are evenly distributed on special backlash-free bearings in the grinding spindle head. A separate hydraulic unit with heat exchanger prevents vibration and overheating. High stability thanks to ribbing and dimensioned wall thicknesses. Digital control of automatic vertical feed with servomotor. The hydraulic system ensures smooth table movement, even under heavy load. Rapid approach to workpiece height, automatic lifting after completion of the work cycle. Adjustable longitudinal and vertical table feed via end stops. PLC models are equipped with SIEMENS PLC controllers and touchscreens. Technical specifications: Table clamping surface width: 510 mm Table clamping surface depth: 250 mm T-slots (quantity/width): 1 / 14 mm Electromagnetic table size: 250 x 500 mm Longitudinal travel (x): 560 mm Transverse travel (y): 275 mm Max. spindle axis-to-table distance: 450 mm Max. table load: 180 kg Grinding wheel size: 200 x 20 x 31.75 mm Hydraulic table feed speed: 5 - 25 m/min Grinding spindle speed: 2850 rpm Grinding spindle motor power: 2.2 kW Hydraulic pump motor power: 0.75 kW Vertical feed motor power: 0.5 kW Total motor power: 3.45 kW Voltage: 400 V Dimensions (W x D x H): 1900 x 2050 x 1840 mm Weight (approx.): 1750 kg Transverse feed (Y): Automatic transverse feed: 0.5 - 8 mm/stroke Rapid transverse feed: 990 mm/min Transverse feed per handwheel revolution: 4 mm/rev Graduation on handwheel (Y): 0.02 mm Vertical feed (Z): Automatic vertical feed: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke Rapid vertical feed: 480 mm/min Vertical feed per handwheel revolution: 2 mm Graduation on handwheel (Z): 0.005 mm

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, type of input current: DC, Equipment: CE marking, The Bernardo HBS 275 model is one of the most renowned and highly regarded bandsaw models in Europe. Within its class of work, it is undoubtedly the best choice. This is a precise bandsaw designed for universal applications—robust, rigid, and highly reliable. The saw features a swiveling arm for cutting angles up to 60°, a tension gauge for the blade, and a coolant system. The cutting capacity is up to 225 mm round (flat: 245x150 mm). Optimal blade tension adjustment thanks to the dial-type tension gauge. Infinitely variable saw arm adjustment via a hydraulic cylinder with regulating valve. Durable, robust quick-release vise. Suitable for cutting solid and hollow materials from various metals. Two-speed motor ensures optimal power for each operation. Double bearing blade guides for perfect tracking and blade movement. Gedpfxeytr Hzs Acheud Solid frame and arm construction ensure precise work without excessive vibration. Automatic cutoff after the cutting cycle (limit switch). Technical Specifications: Round cutting capacity at 90°: 225 mm Flat cutting capacity at 90°: 245 x 150 mm Square cutting capacity at 90°: 200 x 200 mm Round cutting capacity at 45° R: 160 mm Square cutting capacity at 45° R: 160 x 160 mm Round cutting capacity at 60°: 100 mm Flat cutting capacity at 60°: 100 x 100 mm Working height: 910 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Blade width: 27 mm Cutting speed: 45 / 90 m/min Coolant system pump power: 0.1 kW Motor power: 1.5 kW Motor power S1 100%: 1.1 kW Voltage: 400 V Dimensions (width): 1430 mm Dimensions (depth): 720 mm Dimensions (height): 1700 mm Weight approx.: 190 kg Scope of Delivery: Bandsaw Workpiece stop Base Blade tension gauge Quick-action vise Coolant system Hydraulic cylinder Emergency stop switch Automatic limit switch

Condition: new, input voltage: 400 V, control type: manual, overall weight: 85 kg, Equipment: CE marking, Simple, ergonomic, and economical metal band saw EBS 128 CL by BERNARDO. Angle cutting is possible from -60° to +45°, adjustable via the saw arm. Cutting capacity at 90° up to 125 mm (flat piece 150x100 mm). The main advantage of this saw, besides setting the cutting angle with the saw arm instead of repositioning the material, is the integrated cooling system as standard. This makes the EBS 128 CL an ideal choice for semi-professional craftsmen – combining performance, ergonomics, and ease of use. Key features: • Mitre cuts possible within the range of (+45° to -60°) Gedsyr Nq Uepfx Acheud • Stepless adjustment of the saw arm with a hydraulic cylinder • Automatic end-of-cut shut-off – limit switch • Robust, torsion-resistant saw arm • Three cutting speeds adjustable by V-belt drive • Sturdy machine frame guarantees precise, quiet, and vibration-free operation • Supplied as standard with quick-action vice and workpiece stop • Standard integrated coolant system • Equipped to the latest safety standards with a separate emergency stop button (CE compliant) Technical Specifications: Cutting capacity round 90° 125 mm Cutting capacity flat 90° 100 x 150 mm Cutting capacity round 45° R 95 mm Cutting capacity flat 45° R 95 x 76 mm Cutting capacity round 60° 50 mm Cutting capacity flat 60° 50 x 56 mm Working height 740 mm Band saw blade dimensions 1638 x 13 x 0.65 mm Blade width 13 mm Cutting speed 23 / 35 / 55 m/min Motor power 0.75 kW Continuous rating S1 100% 0.55 kW Voltage 400 V Dimensions (W x D x H) 980 x 550 x 1100 mm Weight approx. 85 kg Scope of Delivery: • Band saw • Quick-action vice • Workpiece stop • Automatic end switch • Mobile machine base • Hydraulic cylinder • Cooling system • Separate emergency stop button (CE compliant)

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel Gusdpsvutw Hofx Achjd High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -