Used Tool milling machines - univ.conv. 0-399mm X-axis travel for sale (111)

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm Bob Eclovvnfus Ruowl table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, 3-Axis Active Linear Control Heidenhain TNC 123 Speed 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque/milling performance Feed 5 to 500 mm/min, continuously variable Rapid traverse 1.2 m/min Bebjv Nqu Es Ecl Ruewl Quill: Extendable quill, vertical 60 mm SK40 M16 drawbar thread X/Y/Z axes 300/160/340 mm Angle table 600 x 210 mm, max. load 200 kg

Condition: ready for operation (used), Year of construction: 1968, Available immediately from location: DECKEL Toolroom Milling Machine Type FP 1 Year of manufacture approx. 1968 Table 600 x 210 mm Travel X/Y/Z 300/160/340 mm MT 4 Spindle speeds 60 – 1800 rpm Horizontal milling attachment Drive 1.5 kW Accessories: Bsb Ecl Rjv U I I Hjuowl Vertical milling head Fixed table Vise Dividing head Collets Holders Weight 600 kg Price: €3,500 plus VAT, ex location

Condition: defective spare-parts repository (used), Year of construction: 1980, Functionality: not functional, machine/vehicle number: 2271 / 1701-0527, In use until summer 2024, since then electrical defect, screen black Bwjb Ecl Rov Uzhgousl

Condition: used, Year of construction: 1989, x-travel 350 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 280 mm spindle taper SK 40 150 - 1660 U/min feeds 25 - 285 mm/min rapid traverse 1 m/min quill stroke 80 mm milling-head swivable +/- 45 ° total power requirement 3 kW weight of the machine ca. 1,2 t Bjb Ejvzhidecl Rujwl dimensions of machine L x W x H 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant

Condition: reconditioned (used), Universal tool milling machine cover FP1: Technical data: -Working range X: approx. 300 mm -working range Y: approx. 150 mm -Working range Z: approx. 340 mm -swiveling angular table -Clamping surface: 260x600mm -T-slots: 5 -T-slot width: 12 mm -Spindle speeds:: 20 - 2000 rpm -speed range - vertical: 60 - 1200 rpm -speed range - horizontal: 95 - 1900 rpm -Speed steps working spindle: 12 -feed range: 10 - 500 mm/min -feed steps: 10 -spindle mounting: MK 4 -Pinhole stroke vertical: 60 mm -Total power requirement: 1.7 kW -machine weight approx.: 0.8 t -space requirement approx.: 0.9 x 1.05 x 1.55 m Scope of overhaul: -Complete renewal of the electronics (from a professional with circuit diagram!) -Cleaning -polishing of all blanks -New paint Beb Ecehv H Spsl Rujwl -exchange of various signs -Replacement of all standard parts (screws, handles, levers, hand wheels, oil sight glasses etc.) -bearing and sealing of the upper gear shaft -sealing of the coolant pump -Conversion of the feed axles to safety handwheels -reinstallation of the coolant lines -adjustment of the V-guides and axle clamps On request, the machine can be equipped with glass scales in all axes. The machine can be inspected and tested by appointment. The machine transport and various accessories we offer you with pleasure.

Condition: used, Year of construction: 1994, x-travel 1200 mm y-travel 500 mm z-travel 575 mm table-size 1700 x 400 mm spindle taper ISO 40 spindle turning speed range 32 - 1600 U/min total power requirement 9,0 kW weight of the machine ca. 3,5 t dimensions 2,2 x 2,4 x 2,1 m Universal milling machine - Digital display - Tool cabinet with contents - horizontal counterholder Bwjbev T Nq To Ecl Rusl - Documentation - ARNO hydraulic vise - Coolant system - Machine feet

Year of construction: 1988, Condition: good (used), Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Bob Esrk Aaascl Ruewl

Condition: used, Year of construction: 1973, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 215 mm spindle taper SK 40 spindle turning speed range 50 - 2500 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 1,8 kW weight of the machine ca. 860 kg dimensions of machine L x W x H 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, Bjb Ecjtqqn Rjl Ruewl coolant

Condition: used, x-travel 700 mm y-travel 250 mm z-travel 300 mm table-size 1000 x 230 mm spindle taper ISO 40 Bsb Eev T Nqyjcl Ruowl spindle turning speed range 35- 1500 U/min total power requirement 3,0 kW weight of the machine ca. 1,4 t dimensions 1,55 x 1,4 x 1,65 m Universal Milling Machine - Huron Head - Mounting Fixture for Huron Head - Horizontal Counterholder - Documentation - Coolant System - Machine Feet

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Beb Ejtp Nyfscl Ruowl

Condition: good (used), Year of construction: 1991, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Bwobetqclhj Ecl Rusl

Condition: good (used), Year of construction: 1981, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Beb Ecjuvgnqsl Ruewl

Condition: good (used), Year of construction: 1980, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Bwob Esumcmqecl Ruel

Condition: good (used), Year of construction: 1990, Macmon M 100 E tool milling machine with 2-axis Elesta-Heidenhain digital readout from training department , rigid table , SK 40 spindle holder. Good working condition, can be demonstrated under power by arrangement. Bwjbsrazzrj Ecl Rujl

Condition: used, Year of construction: 1972, Macmon M 100 C tool milling machine , rigid table , MK 4 spindle holder. Ready for operation, can be demonstrated under power by arrangement. Bob Ejrgpluecl Ruewl

Year of construction: 1975, Condition: good (used), Lid FP1 tool milling machine, 2-axis Sony digital display, dividing head SK40, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, can be demonstrated under power by arrangement. Bjb Ecljrhzcqs Ruswl

Year of construction: 1974, Condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Bjbsq A Icqs Ecl Ruewl

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Bweb Ecl Rsv Azb Nouel

Year of construction: 1978, Condition: excellent (used), Macmon M 100 D tool milling machine with 3-axis Fagor digital display from training department , rigid table , SK 40 spindle mounting. Accessories : div. collets and cutter arbors. Very good working condition , can be demonstrated under power by arrangement. Bwobjhtfubs Ecl Rujl

Year of construction: 1976, Condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Bjborhzcue Ecl Rujwl

Year of construction: 1997, Condition: good (used), Macmon M 100 RE tool milling machine with 3-axis Heidenhain digital display from training department , rigid table , SK 40 spindle mounting. Accessories : Electric spindle guard , div. collets and cutter arbors. Good working condition , can be demonstrated under power by arrangement. Bwob Ecl Rjhgmmzeujl

Condition: good (used), Year of construction: 1976, Lid FP1 tool milling machine, 3-axis digital display, fixed table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, can be demonstrated under power by arrangement. Beb Ecetvmr Asl Ruowl

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Bweb Eclsv Azbpe Rujl

Year of construction: 1975, Condition: good (used), Cover FP1 tool milling machine, rigid table, SK 40 spindle mounting, accessories: various collets and cutter arbors, counter holder, good working condition, can be demonstrated under power after consultation. Bwob Ejlwql Hjcl Rujl