Used punching presses (window production) for sale (45)

Year of construction: 2009, condition: used, The machine is powered and can be inspected by appointment! Technical data / machine components: Year of manufacture: 12/2009 Manufacturer: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18-20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 tons Horizontal loading magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, 90 mm wide, for holding the profiles, with a pusher 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Depth, max: 2,380 mm, length: 7,400 mm Loading weight, max: 1,000 kg Conveyor length: 1,850 mm Profile length, min: 1,000 mm Profile length, max: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveyor speed: 4 m/min Material stop on the left Magazine "empty" sensor, manual cycling Tactile switch for the first loading 5 pneumatic cylinders for aligning the profiles in the longitudinal direction 6 lifting rollers for lifting the profile from the loading magazine and transferring it to the pusher Pusher, electronically positionable feed system: Reinforced design Feed length, max: 9,000 mm Mounted on the right side of the machine Prsdezbac Tjpfx Ah Doa Profile feed from right to left Guide profile with linear guide rail Carriage: plate construction with ball bearing carriage Drive via linear motor, positioning via magnetic strip Pneumatic material gripper All 8 profiles can be automatically clamped without adjustment Repeat accuracy: +/- 0.15 mm Rapid traverse speed, max: 180 m/min Input of the profile tube length into the control system 1 light barrier for detecting the beginning of the profile before the first punching head Punching unit: Drive: hydraulic Punching force per cylinder: 3.0 t, designed for 55 punching cycles per minute Only a maximum of 2 tools can be in operation Vertical punching head with 2 cylinders Punching stroke: 15 mm including 2 punching tools for hole ø 6.5 mm, spacing 65 mm Punching cylinders can be selected individually, guide for the profile 2 horizontal punching heads Punching stroke: 15 mm including 1 punching tool each for hole ø 6.5 mm and 1 punching tool for oblong hole 7 x 12 mm, guide for the profile Cycling lubrication system with 4 nozzles for lubricating the punches 3 l oil tank, level monitoring Saw: Drive: 5.5 kW, 400 V, 50 Hz Saw blade: ø 500 mm Saw feed: pneumatic with hydraulic control, from below Pneumatic profile clamping device: vertical and horizontal Cycling lubrication system with one nozzle Flap after the saw for removing cut-off pieces and scrap, max. 200 mm length Parts fall downwards into the provided box Longer scrap pieces are disposed of with good parts Needle marking system: Character size: 2 – 7 mm Marking window: 80 x 20 mm, 15 characters including spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Year of construction: 2014, condition: used, Max. Stanzkraft: 50 kN Predpfx Aewb Euceh Dea Stroke activation via foot switch Good condition

Year of construction: 1996, condition: used, Hydropneumatic operation Punching force: 50 kN Prjdpjyxpw Nofx Ah Dja Work hub: 35 mm Overhang: 110 mm Installation height: 140 mm

Year of construction: 1993, condition: used, machine/vehicle number: 24323, For corner joints, mullions and posts are designed for optional adhesive or nail hole applications. Water drainage slots in the cover frame and mullion profiles. Psdpfxobnnwqe Ah Dsra Recesses for SCHUCO window handles. Free movement of the mullion bar groove in window sash profiles, designed for inward-opening and outward-opening window profiles. Stamping force, depending on air pressure (6 - 8 bar): 0.6 - 0.8 MPa. Air consumption: 9 l/cycle. Space requirement: 620 x 380 x 1250 mm. Weight: approx. 106 kg.

Condition: used, machine/vehicle number: 4 06A1 0214/26236, For corner connections, locking bars and posts are provided with options for adhesive or nail holes. Water drainage slots in the cover frame and locking bar profiles. Recesses for SCHUCO window handles. Free movement of the locking bar groove in window sash profiles, designed for inward-opening and outward-opening window profiles. Punching force depending on air pressure (6 - 8 bar): 0.6 - 0.8 MPa Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Psdpfobnnwfsx Ah Djra Weight: 108 kg

Condition: used, Max. punching force: 100 kN Adjustable stroke, max. 50 mm Podjxrmz Ajpfx Ah Dsra Stroke activation via foot switch Weight: approx. 600 kg

Condition: good (used), Year of construction: 1996, Punch, complete with base frame Hydro-pneumatic drive ■ Operation via foot valve ■ Stroke length max. 40 mm ■ 25 double strokes / min. ■ Installation height max. 250 mm Predpfx Astk Ul Rsh Doa 130 mm projection ■ Projection with turntable 90 mm ■ Table top height 950 mm ■ Tappet force 90 KN at 10 bar

Year of construction: 1999, condition: excellent (used), Pneum. Multi-function stamping ESCO Psdpfx Aef R Tcneh Dsra

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Max. daylight = 280 mm Pedpfx Ahsfitbwo Dora Dimension 60 x 850 x 1500 mm Weight 300kg

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Pjdpofcbb Hofx Ah Dora

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles stroke 20 mm Prsdpfoff Apiex Ah Dea

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 280022, Schüco profile punching tool for facade series FWS50 and FWS60 with base frame Pedpfoy R D Akex Ah Djra

Condition: ready for operation (used), Multi-function punching machine Schüco 296862, year of manufacture unknown. Psdpfx Ahjd R S Hus Djra

Year of construction: 1995, condition: ready for operation (used), Multifunction punching machine, Schüco 296817, manufactured in 1995. Pjdpfed R S Hrex Ah Djra

Year of construction: 2005, condition: ready for operation (used), Pressing force: 6-8 bar Air consumption: 8 l/stroke Ram stroke height: 12 mm; 134 mm Number of strokes: 400 strokes/min Max. punching force: 3500 kp Machine weight approx.: 80 kg Pneumatic press Schüco for Schüco punching tools Article no. Schüco: 290 124 Manual included Various crimping tools included! Tool numbers: 283073, 280162, 299259, 283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for safe and fast clamping of the crimping tools The data for this listing was created using ModulMWS — software from LogoTech oHG. Manufacturer: SCHÜCO Model: Pneumatikpresse Machine type: Pressure: 6-8 bar Pjdpfxjyzkife Ah Djra Air consumption: 8 l/stroke Ram stroke: 12 mm : 134 mm Number of strokes: 400 strokes/min Max. punching force: 3500 kp Machine weight approx.: 80 kg Pneumatic Schüco press for Schüco punching tools Schüco article no.: 290 124 Manual included Various crimping tools included! Tool no.: 283073, 280162, 299259, 283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for safe and rapid clamping of crimping tools Data for this offer was created with ModulMWS – software by LogoTech oHG.

Condition: used, Schüco PDG E CUT Prjdpfoyni Apex Ah Dea

Year of construction: 2002, condition: excellent (used), functionality: fully functional, machine/vehicle number: 661 1401, For sale is a Schüco gasket insertion machine, item no.: PR 280010. The machine has only been used sparingly due to limited space, which explains its like-new condition. The machine can be inspected at our facility. Psdpfx Ahoyc Sn Ds Djra

Year of construction: 2002, condition: excellent (used), functionality: fully functional, machine/vehicle number: 109 262, For sale is a corner connection press complete with automatic adhesive injection unit from Schüco, Art. No.: EVM 280106, including an extensive range of accessories for various profile series, manual, and CE certification. The machine has seen very little use due to lack of space and is therefore in like-new condition. Podpfx Ahoyc Sinj Dsra

Year of construction: 2019, condition: excellent (used), functionality: not functional, Compact hydraulic C-frame punching machine with 160 kN punching force for precise applications on smaller profile cross-sections. The torsion-resistant frame design ensures accurate punching in aluminium, steel or plastic. Prjdoy Agqnjpfx Ah Doa

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces • Left and right profile support arms are available Pjdpfx Ahjrbk Tfo Dera