Multifunctional punch

Schüco 296 570.234.4.12.0193.A1

Condition: used, Multifunctional punch, punch, hole punch, pneumatic hole punch -Article No.: 296 566 -Weight: 170 kg Ncjlhjb A I D Necdw Ijr

Condition: used, Multifunctional punch, punch, hole punch, pneumatic hole punch -Article No.: 296 566 Ncolhcjb A Hl Rodw Ijr -Weight: 170 kg

Condition: used, Multifunctional punch, punch, hole punch, pneumatic hole punch Ncolhcdwsb A I H Rj Ior -Article No.: 296 566 -Dimensions: 800/400/H1200 mm -Weight: 170 kg

Condition: ready for operation (used), Multifunction punch Schüco 296862, year not known Ncelhcod R S Huodw Ior

Year of construction: 1995, Condition: good (used), machine/vehicle number: 234505A1/0405/33140, Operating pressure 6-8 bar Weight 106 kg Dimension 0,70 x 0,38 x 1,05 m Ncelhcdob Nnhfsw Ier Remarks: Multifunctional punch Air consumption 18 l per stroke, pneumatic punching process via foot switch release

Condition: used, machine/vehicle number: 4 06A1 0214/26236, For corner joints transom and mullion for optional glue or nail holes Water drainage slots in frame and transom profiles recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Weight: 108 kg Ncolhobnnwfscdw Ijr

Year of construction: 1994, Condition: good (used), multi-function punch, punch, hole punch, pneumatic hole punch -Article number: 296 346 -Dimensions: 800/400/H1200 mm -Weight: 170 kg Ncolhcjvmq Utodw Ier

Year of construction: 1995, Condition: ready for operation (used), Multifunction punch Schüco 296817, built 1995 Ncjljd R S Hrohcdw Isr

Condition: used, Multifunctional punch, punch, hole punch, pneumatic hole punch Ncslhcdjn Sru Hjw Ior -pneumatically operated

Condition: ready for operation (used), Year of construction: 2009, operating hours: 40,000 h, General Data Measurements width 5500 Measurements depth 15000 Measurements height 3900 Machine weight 12000 Main Drive Spindle speed range 24000 Spindle motor power 16 kw Tool taper HSK-63F Movement X-Axis Rapid Traverse 60 m/min Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Additional Equipment Automatic central lubrication: SPC driven Air conditioning unit Control panel: 19” touch TFT colour display Software: SchüCam 500 mm saw blade in a 5-axis spindle" also suitable for PVC profiles General Data Measurements width 5500 Measurements depth 15000 Measurements height 3900 Machine weight 12000 Main Drive Spindle speed range 24000 Spindle motor power 16 kw Tool taper HSK-63F Ncjlhcjupm T Tedw Ier Movement X-Axis Rapid Traverse 60 m/min Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Additional Equipment Automatic central lubrication: SPC driven Air conditioning unit Control panel: 19” touch TFT colour display Software: SchüCam 500 mm saw blade in a 5-axis spindle" also suitable for PVC profiles This 5-axis SCHÜCO MFM DC 500 vertical machining center was manufactured in 2009. It features a high-capacity tool magazine with 16 spaces, automatic clamping, and a robust milling motor output of 16 kW. The machine can handle a maximum processing length of 7500 mm and speeds up to 60 m/min in X/Y axes. Ideal for complex, multi-axis tasks, the SCHÜCO MFM DC 500 vertical machining center we have for sale is equipped with a 19” touch TFT color display. Contact us for more information. Application Types Milling

Year of construction: 2005, Condition: used, Max. saw blade diameter: 400 mm Saw table can be swiveled on both sides Pneumatic feed via 2-hand operation minimum quantity spraying Ncjlhjwb Eqqocdw Ier Saw blade speed: 3,500 rpm

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 499007-080, JANSEN welding table - Schweisstisch 1 box of accessories, tools etc. included Nelhcdwjwbt N Is Ijcr

Condition: used, Functionality: fully functional, In this offer you buy a used accessory ‘Canon POD Deck Lite XL-A1’ Object of sale: 1 x Canon POD Deck Lite XL-A1: For various Canon imagePRESS models Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: Nelhcov R Tx Njdw Iecr You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Year of construction: 1994, Technical details: air pressure - required: 8 bar total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg Ncjlhcdeu Icyhjw Ior MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: - for Schüco alloy window frame, post and beam profiles S65 - for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 - for Schüco alloy door profiles Royal S65 door base profiles - foot operation - pneumatic air gun AND - drilling automat for window construction application: - drill automat for door hinge - drill taper: for 8 pcs, usable tools 6 pcs, countersink drills with dia. 11/15mm approx. 80mm long - clamping operation via foot control and drilling via manual - accessories: diverse installation parts i.D. *

Year of construction: 1998, Condition: ready for operation (used), Pneumatic tan tool Schüco 293885, built 1998 Njlhcdwjd R S Hyj Iecr

Year of construction: 2009, operating hours: 5,387 h, Condition: ready for operation (used), Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! The bid obliges the buyer to collect the item on time in week 12. Functions: sawing, notching, milling, drilling, tapping, milling TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. travel speed X / Y / Z: 60 / 60 / 30 m/min Rotation A-axis: ±110°, continuous Rotation C-axis: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc milling cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of places in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of the clamping blocks: Yes Number of clamping blocks: 8 Profile systems with quick-change system: Yes Ncelhsv H Awyecdw Ier Processing features Max. cross-section W x H / length of single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length of single bar processing: 30 x 30 / 300 mm Movement: Tool Max. number of profiles per machine configuration: Up to 8 profiles (depending on the individual bar length) Number of profile fixed stops: 2 Moving the clamping blocks during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes In-house programming without NC/CNC knowledge: Yes Schüco CAM can be installed on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t On time: 20,616 h Spindle time: 5,387 h

Year of construction: 2000, Condition: used, 5-axis machining center in very good condition, which can be tested by arrangement Max. processing length: 6,600 mm Y-axis travel: 800 mm Z-axis travel: 500 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 360° Max. Nslhcjulz Ikjdw Iscr Speed 24,000 rpm Spindle power: 7 kW Tool changer with 9 standard and 1 special tool (saw blade up to 250 mm) minimum quantity spraying Tensioner detection and automatic displacement 8 pneumatic material clamps Light barrier protection Manual control console Windows operating system Spindle in very good condition (approx. 6,600 spindle hours) Loading is included in the price Weight: approx. 6,500 kg

Year of construction: 2007, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 319 00 00347, Schüco PDG E Cut Ø500 mm blades. Extra blades available. Ncelhjwbt E Nocdw Isr Machine is well maintained and working perfectly.

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 1219-2U3039, total length: 1,150 mm, total width: 5,500 mm, total height: 1,800 mm, overall weight: 480 kg, saw blade diameter: 400 mm, blade thickness: 27 mm, geschikt voor het bewerken van aluminium; glaslatzaag met snede van 90° en 45°; profielhoogte 10-60mm; profiel breedte 16-60mm; toerental motor 2800rpm; minimale zaaglengte 250 mm; maximale zaaglengte 6000 mm; voorzien van: automatische aanvoer; automatische meting van de glaslatten; koelsysteem; automatische oliesmering; beglazing clip machine; profielbuffer; uitvoerrollenbaan met afzuiginrichting en kunststof rollen; F63SB-2 motor; Zebra TLP2742PSE labelprinter; EPC Lx PC-besturing met touchscreenbediening; Windows 2000 besturingssysteem; Schüco draadloze digitale meetlat; handleiding digitaal aanwezig; LET OP! koper is verantwoordelijk voor het demonteren en uithuizen van dit kavel; heftruck aanwezig Ncjlhcdjv Hz Ikew Isr

Year of construction: 2007, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 282395-6570 002, No minimum price - guaranteed sale at the highest bid! Fully automatic cutting and processing of aluminum profiles in throughfeed for building elements, facades, furniture and industrial applications. Machine was overhauled in 2022 - in-transport plastics renewed, Schüco service done and adjusted, new circular saw blade purchased, and more TECHNICAL DETAILS Neleu U Hf Eohcdw Ijcr Processing length: max. 7,500 mm Profile cross-section: max. 160 x 270 mm height Working height feed magazine/machine: 950 / 1,120 mm Pneumatic operating pressure: 6 ± 1.5 bar X-axis travel: 246 mm Y-axis travel: 250 mm Speed: max. 170 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Angle of rotation B-axis: max. ± 45° Saw motor power: 3 kW Saw blade speed: max. 3,000 rpm Tools Saw blade diameter: 550 mm Condition: new in 2022 MACHINE DETAILS Rated voltage/frequency: 400 V / 50 Hz Number of phases/neutral conductor/protective earth conductor: 3 NPE Rated current consumption: 35 A Machine weight: 1,700 kg Note: The machine's take-off has been shortened, but can be extended again

Condition: ready for operation (used), Schüco Tool Pressing Tool Punching Tool, Item No.293900, 290146-02, 299259, 290146, 293338, 293902, 296198, 299905, 296168, 293901, 280162, 296548, 293354, 287568, 290146-02, 296170, 296159, 297755, 293807, 296199, 299372, 293899, 282028-04, 283072-02, 280222-05 and 5pc. Without number Ncelhcdwjd Sc D Se Ior

Condition: good (used), SCHÜCO ISOMAT 5 polyamide assembler in aluminium profiles Ncelhcdwjvzlhde Ier Almost new with tools for different profiles The Isomat system joins profiles in a single process step, even in combination with special solutions. The profile corners of the Schüco façade and skylight construction range can be precisely adjusted and the aluminium half profiles can be easily joined in different colours. This saves costs, storage space, time and labour.

Year of construction: 1995, Condition: used, Max. sawing length: 6,000 mm Max. saw blade diameter: 500 mm Automatic positioning via diamond control of length and angles Angles can be swiveled inwards and outwards (20-135°) Moving roller conveyor Soundproof cabin Minimum quantity spray device Ncolhov Ip T Decdw Isr chip conveyor belt Weight: approx. 2,800 kg

Year of construction: 2006, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 1219-206133, Schüco PGS cutting saw with electronic measuring and almost new screen control display. Incl. trolley table and mounted storage rack for small profiles, e.g. glass strips. 2 measuring rods with radio module Max. saw blade diameter: 400 mm Max. positioning length: 3000 mm Operating instructions available Njlhcdewbt Azow Ijcr A unique machine in perfect shape and fully functional.

Year of construction: 2020, operating hours: 2,900 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 4720_0105, Well-serviced and fully functional 5-axis CNC machine, ready for many years of flawless precision work at a new facade construction company. The machine has been set up and serviced by Schüco's machine department and a full service book is available. See the attached machine brochure for details about the machine. Schüco is happy to provide a separate offer for securing the machine for transport, moving, reinstalling it, and then calibrating and teaching how to operate the machine. Ncslhcdjwbttgsw Ijr The machine works together and exchanges files with the calculation programs Schücal, Logikal, etc. Lots of measuring tools, processing tools and discs and other accessories are included. Price from new €367,000 + many extra tools and accessories