Used Hydraulic plate shears for a plate thickness over 13mm for sale (61)

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 09233-K06P27, back gauge: 1,000 mm, sheet thickness (max.): 16 mm, cutting width (max.): 3,100 mm, controller model: Cybelec Cybtouch 6, power: 30 kW (40.79 HP), TECHNICAL DETAILS Max. sheet thickness: 16 mm (42 kg/mm²) Cutting angle: 2.5° Max. cutting width: 3,100 mm Number of cuts per minute: 10 Backgauge length: 1,000 mm Table height: 900 mm Maximum pressure: 270 bar Dujlq Spwov I Srpjhet Number of downholders: 14 Control system: Cybelec Cybtouch 6 Power: 30 kW Oil volume: 500 l MACHINE DETAILS Length: 4,050 mm Width: 2,250 mm Height: 2,350 mm Weight: 16,400 kg Maximum noise level: 70 dBA Operating temperature: 0 - 50 °C Installation dimensions: approx. 6.6 x 3.8 m EQUIPMENT - Ball screws in the backgauge - Touchscreen on the backgauge

Condition: used, Year of construction: 2006, sheet width 1030 mm plate thickness 15 mm rear stop 600 mm cutting angle 3,5 ° Duolq Spwovuz Rzjhst no. of strokes 48 Hub/min total power requirement 22 kW dimensions of the machine ca. 2500 x 1700 x 1500 mm weight 3100 kg

Condition: excellent (used), Technical data: maximum cutting width: 3100 mm maximum cutting capacity steel St40: 10.0 mm Djlsv H Rwzeq Spwhjut kerf adjustment adjustable rip fence motor power: 15 kW Dimensions (length x width x height): approx. 3900 x 1950 x 2150 mm Weight: approx. 9.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), sheet thickness steel (max.): 16 mm, cutting length (max.): 3,000 mm, overall weight: 16,500 kg, Used high quality Pearson hydraulic 3metre x 16mm guillotine for sale 3metre x 16mm Blade adjustment Duoleva Hq Rsq Spwhot Front operated powered back gauge

Condition: used, Year of construction: 1984, Cutting length: 1250mm, table height: 830mm, connected load: 22kW, length: 1900mm, width: 2200mm, height: 1900mm, weight: 9.6t, with documentation, without spare parts. Delov Hpr Deq Spwhsut

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Duelq Spjuddh Aewhot Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: good (used), Year of construction: 1991, Functionality: fully functional, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 Duelsumhm Ajq Spwhjt TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: good (used), Year of construction: 1997, Used 3 meter guillotine shears from Darley Type: GS 3106 Capacity: 3100 x 6 mm Delem DAC 350 control Pneumatic high hold table Duelqeu Rm Ete Spwhjt Year of construction: 1997

Condition: used, Year of construction: 1975, sheet width 3700 mm plate thickness 16 mm distance between columns 3860 mm cutting angle 2 ° Dujlsuia Eheq Spwhst back stop - adjustable 1000 mm down holder 18 Stk. oil volume ca. 500 l total power requirement 22 kW weight of the machine ca. 10500 kg dimensions of the machine ca. 4500 x 2500 x 2500 mm Max. Sheet thickness stainless steel: 12mm Cut gap adjustment: 0-16 mm - Machine has a back gauge adjustable from the front. - cut line lighting

Condition: used, Year of construction: 1992, sheet width 3000 mm plate thickness 06 mm distance between columns 3200 mm throat 250 mm stroke 180 mm table width 520 mm table height over floor 1015 mm Number of downholders 8 St. cutting angle 0,5 - 2,5 ° total power requirement 12 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,8 x 2,65 x 2,45 m Machine was overhauled and modernized with light barrier at table. Machine has an automatic back stop with programmable DRO and a sheet lifting Dujlqet Tqnvo Spwhjt device.

Condition: used, Hydraulic guillotine shear STEINER type HTS 30/20 R Machine. No. 315 Year of construction 1982 cutting length 3050 mm cutting thickness 20 mm backgauge 800 mm controlled motor power approx. 30 kW mains connection 400 Volt, 50 Hz Duelq Sped Hxx Aswhet - backgauge with positioning control ELGO - backgauge adjustment via ball screws - Safety light barrier SICK at the front as intervention protection - 3 material support arms with ball rollers - electric foot switch - spare blade Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space requirement for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul.

Year of construction: 1994, Condition: used, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. Duelq Spwjp A Dt Nehet including flat belt conveyor

Condition: reconditioned (used), Year of construction: 1997, Functionality: fully functional, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal Duelq Spsuipu Eswhet

Condition: good (used), Year of construction: 1984, Used hydraulic guillotine shears from Darley Type: GS 1250 20 Capacity: 1250 x 20 mm Electric backgauge with Delem DAC100 NC control Dolqsu Ap Egj Spwheut Extra set of knives (not sharpened) Year of construction: 1984 Machine weight: 9500 kg

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 60460, back gauge: 1,250 mm, sheet thickness steel (max.): 20 mm, overall weight: 26,000 kg, Equipment: documentation/manual, finger protection, HACO PSX 3020 In very good condition. Cylinders are still being overhauled Control SC 100 is about 2 years old Working length: 3050 mm Capacity regular steel: 20 mm (400 N/MM2) Back gauge length: 1250 mm Control: SC 100 motorized backgauge with digital display Equipped with discharge conveyor Finger protection by means of light curtain Cutting clearance: automatic Condition of blades: good Duelq Spju Sqlmjwhjt Minimum cutting angle: 0.5 Maximum cutting angle: 3 Number of holders: 18 Length and number of plate holders: 8x 500 mm side stop 3000mm Equipped with high maintenance device: No Strokes per minute at lowest angle: 22 Strokes per minute at largest angle: 11 Working height: 1030mm Engine power: 56.0 KW Overall length: approx 4100mm Overall height: approx. 2650mm Overall width: 2460mm Weight approx. 26,000kg Serial No.: 60460 Year of construction: 2004

Condition: new, sheet length: 3060sheet thickness: 20,0total power requirements: 37weight approx.: 21,5messurements (LxWxH): 3910x3395x2640 Dslq Spwod Egqxohout

Year of construction: 1980, Condition: used, sheet width / mm plate thickness / mm distance between columns / mm Dolq Sog Twmhopwheut Hydraulic guillotine shears Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Sheet thickness SS: 13mm Stop max.: 1m Weight: 34 tons

Condition: used, Year of construction: 1982, Used plate shears from Darley Duolq Spweum Sz Djhjt Type GS 1250 x 16 Capacity 1250 x 16 mm Electric back gauge Manual cutting gap adjustment

Condition: new, sheet length: 6125sheet thickness: 16,0total power requirements: 45weight approx.: 49500messurements (LxWxH): 7200x3700x2780 Duslod Ehh Asq Spwhst

Condition: new, sheet length: 4065sheet thickness: 16,0total power requirements: 30weight approx.: 21000messurements (LxWxH): 4930x3300x2220 Delqed Ehh Ne Spwheut

Condition: new, sheet length: 3.200sheet thickness: 16,0column width: 3100total power requirements: 18,5weight approx.: 11700messurements (LxWxH): 4,2x 2,050 x 2100 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Djlq Ssd Ab Hlspwhsut Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 6125sheet thickness: 20,0total power requirements: 45weight approx.: 55000messurements (LxWxH): 7200x3700x2780 Djlq Spwsd Ehhzjhsut

Condition: new, sheet length: 3.120sheet thickness: 16,0total power requirements: 30weight approx.: 15.000messurements (LxWxH): 3.875 x 3.200 x 2.170 Duolsd Eqrioq Spwhet

Condition: new, sheet length: 3040sheet thickness: 16,0total power requirements: 30weight approx.: 15,5messurements (LxWxH): 3870x3315x2280 Duolq Sped Egqyewhst

Condition: new, sheet length: 4065sheet thickness: 20,0total power requirements: 37weight approx.: 27000messurements (LxWxH): 4950x3390x2570 Dujled Ehh Ioq Spwhot