Plate Shear - Hydraulic

DURMA VS 3016

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Kedeuiy Nyjpfx Abnjlp Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: used, Year of construction: 2022, operating hours: 950 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, spindle motor power: 15,000 W, Doosan Lynx 2100LY CNC Lathe – 4 Axes – Extended Spindle Bore 65 mm Year of Manufacture: 06/2022 Delivered and commissioned in Poland: November 2022 Operating Hours: approx. 950h (exact figure available on request). Fully documented. Condition: Perfect, extremely well maintained. The machine has seen very light use, mostly machining small parts with diameters of 15–30 mm. Located near Warsaw – immediate availability. Detailed technical specification and equipment: 1) Number of axes: 4 (X, Y, Z, C) - Swing over bed: 600 mm - Maximum turning diameter: 300 mm - Maximum turning length: 510 mm - Bar capacity in spindle: 65 mm Kodpoyku Agjfx Abnjlp 2) Main spindle: - 3-jaw chuck: 210 mm - Spindle nose: A2-6 ASA - Spindle diameter (front/rear): (110/76) mm - Spindle bore: 76 mm - Draw tube bore: 68 mm - Spindle drive motor (continuous/30 min): 11/15 kW - Spindle speed range: up to 4,500 rpm - Max. spindle torque: 169.0 Nm 3) Axis travels: - X-axis: 205 mm - Y-axis: 105 mm (+/-52.5 mm) - Z-axis: 560 mm - C-axis: 360° 4) Turret: - Tool holders: BMT 45 P - Number of tools: 12/24 - Tool size: 20 x 20 mm 5) Control: FANUC - Screen: 15" Color LCD Equipment: - DOOSAN LYNX 2100 LYB / FANUC with graphic software support (Manual Guide) - Automatic tool probe - Supplied toolholders: * 1x longitudinal toolholder (850418-00278A) * 2x cross toolholders (850418-00276) * 1x dual toolholder (850418-00343B) * 2x boring/drilling holders (850418-00713) * 1x triple boring/drilling holder (850418-00462A) * 2x straight driven toolholders with external cooling (R78831B) * 2x right angle driven toolholders with external cooling (850418-00441) - Hydraulic 3-jaw chuck, 210 mm - Y-axis - Parts catcher with box - Coolant oil skimmer (oil separation system) - Bar feeder interface - 20-bar high-pressure coolant pump (high pressure system – ideal for stainless steel machining) - Programmable tailstock - Automatic chip conveyor - Tool monitoring system - Integrated Ethernet network card - Chip tray - Coolant tank - Toolbox - Additionally: Spare set of lubricants (headstock drive oil, chuck grease, hydraulic unit oil) – top quality, purchased according to manufacturer’s requirements - All documentation, manuals, full set of wrenches and transport locks - Factory transport cover (sheet metal) For further details or to arrange a viewing near Warsaw, please get in touch. The machine is available immediately.

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: OKUMA, controller model: OSP - P300L, number of axes: 4, This 4-axis Okuma LB 3000 EX MYT was manufactured in 2008, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. Consider the opportunity to buy this Okuma LB 3000 EX MYT horizontal turning machine. Contact us for more information. Additional equipment • Bar Loader: Iemca Master mod. 880 33 P/R • Automatic Presetting: Yes • Gear Machining Software and Tools: Yes • Accessories: Chip Evacuator Machine Benefits Technical Machine Benefits Klodpjyalp Ajfx Abnep • Max. Workable diameter: Ø 400 mm • Max. Workable length: 500 mm • Type: cnc lathe • Condition: used • State: optimal Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Travel paths X/Y/Z: 630/630/630 mm 2-fold pallet changer Spindle speed: 10,000 rpm Ksdsxy S Auepfx Abnslp Knoll coolant system with paper band filter Tool holder: SK40 Tool magazine with 80 stations

Condition: used, Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece weight (max.): 700 kg, controller manufacturer: Mazatrol, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, overall weight: 11,000 kg, table length: 500 mm, table width: 500 mm, controller model: Matrix Nexus, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper DIN 69871A-40 Spindle speed 18.000 1/Min Spindle motor 35-26 kW Magazin capacity 80 Ksdeyddf Repfx Abnolp If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Documentation available: No - CE certificate present: No - Number of cylinders [pcs]: 6 - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Klodpfx Aownhabobnep Yorick Diebels

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Klsdpfx Ajxqfwtobnsp Diameter: 2.80m Length: 17.10m

Condition: used, Year of construction: 2005, functionality: fully functional, HSK63 X 630 Klsdpsyc Nc Eofx Abnop Y 630 Z 630 Traverse speed mm/min 1-40000 Number of tools 354 Tool diameter mm 70/150 (with adjacent stations free) Tool length mm 320 Number of pallets 2 Pallet dimensions 400x500 Max. pallet load KG 500 B axis NC Control Sinumerik 840D Tool breakage control Yes Measuring probe Heidenhain Yes Power kVA 69