Year of construction: 2025, Condition: new, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). Cjbvdoiv H Eksigajrb This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: used, Year of construction: 2001, Door hinge drilling unit: with 8 drilling spindles and adjustable drilling depth for simultaneous drilling of the fixing holes for 2-part and 3-part door hinges in blind and leaf frames. Cebvdigobpt Eceaerb Frame and door frame: are precisely adjusted by means of the mitre fence, 2 pressure supports and guide pins on the drilling table and then pneumatically clamped. The stops in the mitre and foot area: are adjustable. Suitable for the following series:Royal S50 N/65N, Royal S55/65/70, Royal- R45, 54w, 64w, 70, and 78w, Iskotherm 74 Weight: 90 kg

Condition: good (used), Year of construction: 2009, Functionality: unexamined, travel distance X-axis: 550 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,500 mm, Manufacturer Demag Type DR721 X-550 mm Y-1200 mm Z-2500 mm C - pneumatic, rotation 90 degrees Load capacity 10 kg Unfortunately without teach box Crjbouwdw Tevdigaeb

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, rotational speed (max.): 12,000 rpm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, Fully functional condition + regular maintenance by machine manufacturer TECHNICAL DETAILS Control: Heidenhain iTNC530 with handwheel X-axis: approx. 3,000 mm Y-axis: approx. 6,000 mm Z-axis: approx. 1,250 mm 4th axis: swivel axis Spindle Spindle type: milling spindle for styrofoam (can be converted to high-frequency spindle) Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Crobvdev Dhlqeigaob Tool clamping: Manual with union nut Drives & feed Feed speed (X, Y, Z axis): up to 20 m/min Axis acceleration (X, Y, Z axis): up to 1.5 m/s² MACHINE DETAILS Connected load: approx. 28 kW Pre-fuse: 63 A Machine space requirement: approx. 5,000 x 10,000 x 4,500 mm Total weight: 10,000 kg With little effort, it can be converted to an HF spindle with 24,000 rpm and HSK63 holder. This enables the machining of a wide variety of materials, including aluminum. The integration of a tool changer is also easy to implement.

Condition: excellent (used), Year of construction: 2007, Injection molding machine Arburg 630S-2500-1300 (231) Product Code: 231 Availability: In Stock Year of production: 2007 Technical data Shot Weight: 510 g Crebevtmlhsvdigasb Clamping Force: 2,500 kN Screw dia: 55 mm Injection pressure: 2380 bar Tie bar distance: 630x630 mm Platen size: 900x900 mm Mould height min.: 400 mm Total day-light max: 1000-1300 mm Type of controls: Selogica Language: German Power: 68 kW Workinghours: 74.294 h Weight: 13500 kg Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Year of construction: 1997, operating hours: 31,850 h, Condition: good (used), Conical twin screw extruder - Manufacturer: CINCINNATI - Type: Titan 45 - Conical screws Ø45mm - Year: 1997 - 31850 operating hours - Engine power: 15kW - Flow rate: 120kg/h - Replacement motor - Replacement vacuum pump - Replacement material feed screw Crebvov D Nzmjdigajb

Condition: used, Year of construction: 2001, Functionality: fully functional, Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC Crebvdigstr Duksaeb - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, Functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. Cebvdigsv D Nxleaorb The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: good (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,500 mm, Year of construction 2003 X = 600 mm Y = 800 mm Z = 1500 mm Csbvdsuwdmbeigasrb

Condition: used, Year of construction: 1992, machine/vehicle number: 293784, Drill spindles: 8 Drill spindle rotation direction: 4 right and 4 left Drill spindle speeds: 2800 rpm Shaft mount: 10 and 11 mm Drill stroke: 100 mm Drive motor: 380 V, 1.1 kW Crjbvebnnybodigajb Table height above floor: 840 mm Space required: approx. 650 x 400 x 1700 mm Weight: 120 kg

Condition: good (used), Year of construction: 1998, operating hours: 105,191 h, Functionality: fully functional, machine/vehicle number: F41, clamping force: 250 kN, screw diameter: 18 mm, clearance between the columns: 220 mm, displacement volume: 20 cm³, mold height (min.): 150 mm, opening stroke: 275 mm, plate width: 220 mm, plate height: 220 mm, overall weight: 1,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 58 A, Machine is in use. Can be viewed in operation. Peripherals are not included with the machine. Cobvdigjvrg Ugsajrb

Condition: good (used), Vibration welding machine for plastic Stock number: 2974 Manufacturer: Branson Type: VIP 2830 Device number: 4.E035.00.A10 Table: 1,000 x 420 mm Stamp: 800 x 420 mm Distance table - stamp: 600 mm Weight: approx. 2 t Dimensions: 2,400 x 1,700 x 2,400 mm Equipment: Crobvdjv D Nfrjigaeb Condition: ready for use Sold without tools!

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, Year: 2015 - technically efficient, ready to work – after full service - vertical work Crebvdevai Nveigaob - flash limitation: 0.2 – 2 mm - Windows 10 operating system - maximum welding dimensions: 2700 x 2500 mm - automatic regulation and monitoring of the welding process - protective gates

Condition: good (used), Year of construction: 1990, Battenfeld-Fischer VK 1-1 Blower Number of heads: 2 Center distance: 100 mm Maximum container volume: 0.5 l Number of stations: 1 Continuous Extrusion Number of extruders: 1 Screw diameter: 60 mm L/D ratio: 20 Parison thickness control: PROFILOG 32 points Center distance: 100 mm Hot knife Automatic coring Voltage: 380 V Triphase Frequency: 50 Hz Blower: Dimensions (L x W x H): 4.60 m x 1.50 m x 2.60 m Cebvdsvrfhrjigaorb Weight: 5000 kg Cabinet: Dimensions (L x W x H): 0.85 m x 1.10 m x 2.40 m Weight: 400 kg

Condition: excellent (used), Year of construction: 2011, Wittmann Battenfeld EcoPower 110/130 injection molding machine Electric machine, energy efficient Control :UNILOG B6 Year of production : 2011 Closing force 110 tons Auger diameter 25 mm Injection weight max. 55.8 gPS Column spacing 470x470 mm Min. tool height 200 mm Cebvdigorn I Nrjaorb Max. tool height 450 mm Hydraulic working pressure 210 bar Machine weight 4600 kg L. 420 x width 140 x height 270 cm, Battenfeld has about 60000 hours (in the machine the computer was changed and the hours were not recorded there, now it has less hours 4944)

Condition: excellent (used), Year of construction: 2003, Bottle blowing machine "PET" Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Crjbvdovddkvsigasb Includes 1.5 L and 0.5 L bottle molds Year of production: 2003 Technical documentation Very good condition

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires Csbvdov Hm A Toigaorb - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: like new (used), Year of construction: 2024, Equipment: type plate available, Volumetric dosing systems - granules, powders and ground material We offer a range of fully functional volumetric dosing systems that are ideal for conveying granules, powders and ground material. • Various models available: We have different dosing systems in stock that can be adapted depending on the material and application. • Testing option: On request, we will test the dosing devices with your material to ensure that they meet your requirements. Cjbvdigevmylzjaorb • Reliable function: All systems are tested and ready for immediate use. Contact us and we will help you find the right doser for your requirements. We are happy to answer any questions or provide advice!

Year of construction: 2011, Condition: excellent (used), INJECTION MACHINE - PROCREA BLOWING Crjbvdepy Eq Hjigajb TYPE Rev 300 This PROCREA REV 300 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 50 cc. at 15 liters and weight of 20 gr. at 700 gr. This machine is predisposed to work with molds of 1 to 8 cavities and the production is very high thanks to the revolver system which carries out all the operations of injection, blowing and ejection of the finished part in a single stage. The construction of molds for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver.

Condition: like new (used), Year of construction: 2000, Injection molding machine Arburg 520C 2000-675 Year of manufacture: 2000 Closing unit Closing force [kN] 2000 Clamping plate dimensions (hxv) [mm] 685 x 685 Crjbvdigsq Tbdksasb Clearance between columns (hxv) [mm] 520 x 520 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Injection pressure [bar] 2080 Electric-hydraulic equipment Pump motor power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Condition: good (used), Year of construction: 2000, operating hours: 38,900 h, Functionality: fully functional, clamping force: 9 kN, screw diameter: 115 mm, displacement volume: 5,349 cm³, injection pressure: 1,600 bar, injection weight: 5,062 g, STORK 900 T injection molding machine Clamping force: 900 T Reference : SXN 9000-8600 Year : 2000 Screw diameter : 115 mm Csbvdoq Iyazoigasrb Max. material pressure: 1600 bar Injection volume : 5349 cm3 Injection capacity : 5062 g Injection speed: 599 mm/s Plasticizing: 123 g/s Distance between columns (H x V): 1010 x 1010 Column diameter: 190 mm Number of hours: 38,900 h

Year of construction: 2006, Condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Crsbvek Rnvmjdigajb Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: good (used), Year of construction: 2001, operating hours: 51,500 h, Functionality: fully functional, clamping force: 14 kN, screw diameter: 133 mm, displacement volume: 8,336 cm³, injection pressure: 1,600 bar, injection weight: 7,919 g, STORK 1400 T injection molding machine Clamping force: 1400 T Reference : SXN 14000-12500 Year : 2001 Screw diameter : 133 mm Crobvdigeq Iyb Heaeb Max. material pressure: 1600 bar Injection volume : 8336 cm3 Injection capacity : 7919 g Injection speed : 771 mm/s Plasticizing: 143 g/s Distance between columns (H x V): 1300 x 1300 Column diameter: 220 mm Number of hours: 51,500 h

Year of construction: 2004, Condition: excellent (used), Injection molding machine Arburg 470C 1500-350 Year of manufacture: 2004 Control - Selogica Geiger robot TECHNICAL DATA Screw diameter [mm]: 35 Injection weight [g]: 127 Injection pressure [bar]: 2500 Closing force [kN]: 1500 Distance between columns [mm]: 470x470 Plate size [mm]: 650x650 Mold height min. [mm]: 250 Power [kW]: 41,9 Dimensions [m]: 4600 x 1700 Weight [kg]: 4560 Equipment Pneumatically operated doors GK control Hydraulic cores on proportional Cjbvdomfr A Hsigaorb Euromap Actionica remote control

Condition: good (used), Year of construction: 2008, operating hours: 60,700 h, Functionality: fully functional, clamping force: 8,000 kN, clearance between the columns: 1,100 mm, BILLION bi-material injection press 800 T Locking force: 800 T Reference: H780/4200 Year: 2008 Crobvdovrfdasigaeb - H780 injection unit: 45 mm screw - Injectable volume of 341 cm3 - Injection pressure of 2276 bars - sfcw shnH4200 injection unit: 80 mm screw - Injectable volume of 2261 cm3 - Injection pressure of 1863 bars Passage between columns (H x V): 1100 x 1100 mm Plate dimensions (H x V): 2400 x 1570 mm Max. mold thickness: 1300 mm Minimum mold thickness: 350 mm Max. opening stroke: 1100 mm Hydraulic cores: 6 Rotating base G4 270mm digital Machine dimensions: 10200 x 2730 x 3533 mm