Condition: ready for operation (used), 1956mm Wide Welex 3 Roll Polishing Stack. 450mm diameter chrome rolls. Chain driven. Hydraulic nip with power pack and accumulator. 2 roll haul off Cgjbon Ht Tfevl Dkast

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Cebsvy Anxovl Dkajgt Type: Vertical Drive: Hydraulic

Condition: like new (used), Year of construction: 2022, Engel duo 17060/2000 injection molding machine Year of production -2022 Robot viper 60 - RC300 integrated Z= 4280 mm X= 1800 mm Y= 2600 mm Injection system Screw diameter mm 135 Screw pitch mm 610 Maximum injection capacity cm³ 8731 Screw speed min⁻¹ 125 Screw torque Nm 14000 Maximum screw speed at reduced torque min⁻¹ 135 Reduced torque at max. speed Nm 12963 Reduced screw speed at max. torque min⁻¹ 112 Maximum screw torque at reduced speed Nm 15630 Regeneration efficiency (3-zone screw) g/s 222.9 Regeneration efficiency (barrier screw) g/s 279.2 Injection Injection efficiency cm³/s 1904 Injection volume cm3 8731 Injection weight g 7860 Injection pressure (regeneration) bar 1648 Injection pressure (maximum) bar 2000 Nozzle Nozzle stroke mm 1100 Nozzle pressure force kN 210 Material cylinder L/D ratio - 25 Heating zones (including nozzle) - 8 Heating power kWel 88.5 Closing system Closing force kN 20000 Minimum closing force kN 2000 Opening force (with pressure cushion) kN 1600 Force opening kN 614 Opening stroke mm 3000 Max. distance between platens mm 3800 Min. mould height mm 800 Max. mould height mm 1800 Spacing between tie bars (h x v) mm x mm 2000 x 1600 Size of mould plates (h x v) mm x mm 2700 x 2430 Max. mould weight (moving platen) kg 41330 Max. mould weight (stationary platen) kg 41330 Max. total mould weight kg 62000 Dry cycle stroke (Euromap 6) mm 1400 Dry cycle time (Euromap 6) s 5.5 Ejector Ejector stroke mm 400 Ejector force kN 385 Drive Installed power of main motors kW 265 Capacity oil tank (injection unit) l 1600 Oil filter Max. cooling capacity (at 25°C) kWcool 43.2 Cobvlsv Iz Ums Dkaogt Water consumption (at 25°C) m³/h 6.3

Condition: good (used), WEBER tube extrusion line including: Csbvovryhyjl Dkaogt WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: defective spare-parts repository (used), Year of construction: 2007, Functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Available from March 2024 Cjbvl Derfbnmokaegt First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2016, clamping force: 800 kN, Very good condition - CC300 control - Maintained exellent from big danish manufacturer. Cjbevib N Tovl Dkajgt

Condition: ready for operation (used), 120mm Battenfeld Single Screw Extruder With 250hp Dc Motor. Fan Cooled Barrel. 32d Plugged Vent. Gneuss RSF75 Continuous S/Changer With Panel. PP PET Cgjbvl Dkjn Hukneast

Condition: excellent (used), Year of construction: 2001, Manufacturer: Engel Type: ES 650/125 HL Control: CC100 Year of Construction: 2001 Cebvl Dovytz Nekasgt Clamping force: 125 t Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2002, Arburg 320S 500-150 injection molding machine WITH SIDE MULTILIFT ROBOT Year of manufacture 2002 Selogica control Closing zone Closing force 500 kN Minimum mold height min 225 Column spacing 320 x 320 mm Dimension of mounting plates 472 x 472mm Opening stroke of mold 350mm Maximum opening width 575mm Injection unit Screw diameter 30mm Injection weight (ps) 71g Injection volume 78 cm3 Specific injection pressure 2210 bar Power supply and dimensions Pump motor power 15 kW Cgoboqqkg Aevl Dkaet Heater power 8.4 kW Installed power 26 kW Weight of the machine 2.25t

Condition: good (used), Functionality: fully functional, Manufacturer PRM Type MGK2121R-1 Cebvouwdv Asl Dkaogt Year of manufacture 1995 Power 3 kW

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, - for extruding rigid, flexible, corrugated profiles Cgobvljv Rgtgs Dkast - KIWEX China product - 4 heating zones - air cooling - 7.5 kw motor - extruder with adjustable speed - water cooling, 1.25 kw pump - drawing belt with 2 0.5 kw motors - with 2-station winding installation - equipped with linear counter - various technological attachments (creepers for corrugated tubes, various screws)

Condition: good (used), Year of construction: 2003, Functionality: fully functional, Excellent three head welding machine for PVCu windows Cgjbvsrkm R Ael Dkast

Year of construction: 2015, Condition: excellent (used), Mecasonic MCS2 CAB ultrasonic welding system - Very good condition Cobvl Devvw Ekekajgt - Year of manufacture: 2015 - 3 units available - CE declaration of conformity given - Condition: Incoterms EXW CH-4528 Zuchwil - Loading options available

Condition: excellent (used), Functionality: fully functional, Motan Luxor S120 granulate dryer for sale in very good condition. Works perfectly, has been used very little. - Type LS 120 - CN - V2 - 0 - 0 + EU - Serial number 12 EU 0022 - 400 V Cgsbvl Dev Ic Inskast - 120 m3/h dry air volume - Heating output 10.5 kW - 32A connection Shipping possible by arrangement. If you have any questions, please contact us at any time.

Condition: excellent (used), Year of construction: 2007, Wanner C13.20 SV Slow Mill Year of production -2007 Power: 2.2 kW Description: Rotor knives: 9 Csbjv Inpksvl Dkaegt Stator knives: 2 Rotor Ø: 130 mm Rotor width: 200 mm

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: MP-1406-90, The extruder is a single-screw extruder with an output of max. 120 kg/h. The screw diameter is 90mm. PVC pipes up to 150mm were produced on the system. The system is fully functional. It was replaced by a new one with a larger output. Cobsufxxrjvl Dkajgt The tools and calibrators are not included.

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, - for grinding plastic, rubber parts etc. - productivity 130 kg per hour - 3 rotor knives, length 600 mm Cebsv Rgnqevl Dkaogt - 2 stator knives, length 640 mm - 650 mm feed opening - 3.6 kw pneumatic conveyor - has a set of spare knives

Condition: excellent (used), Year of construction: 1998, power of the servo motor: 22 W, ADLER 22 KW shredder This shredder is equipped with a coil winder for automatic material feed. Winding pressure control. 1500 mm cutting chamber. Equipped with 2 turbines for Big Bag placement. Ideal for film Overhauled equipment. Cgjbvljqakbvj Dkaot Shredder weight: 2350 KG Motor power: 22 KW Chute dimensions: 1500 x 180 mm Rotor type: hollow Rotor diameter: 250 mm Rotating blades: 3x5 Fixed blades: 2 x 5 Hourly production capacity: 300 to 500 kg/h Built-in cyclone

Condition: excellent (used), Year of construction: 2006, clamping force: 800 kN, column diameter: 30 mm, 3 pcs of Very well maintained 2K machines from big Danish Manufacturer. Cobov Du U Sjvl Dkasgt Always maintained 100%

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper Cjbvljvvtx Ts Dkaegt General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes

Condition: ready for operation (used), Year of construction: 2017, A total of five Cannon foam systems are available. Materials: isocyanates and polyol, press plate dimensions X/Y: 720mm/650mm, lid opening angle: 100°, tilt angle: 60°, opening min./max.: 312mm/502mm, parallel stroke: 190mm, approach stroke: 95mm, press stroke: 95mm, ejector stroke: 75mm, control: PLC. Including material preparation. Documentation available. On-site inspection is possible. Cjbvsv Hgkdsl Dkaegt

Condition: good (used), Single Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Cobjvri Ddsvl Dkajgt Options • Including haul-off • Including cooling bath

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, - 10 heating-cooling zones -hydraulic screen changer 2.2 kw - without stopping the machine - 2 screw feeders 65 Cobvl Dkjv N N R Ssaogt - magnetic grid separator - vacuum degassing - 90 kw extruder motor with adjustable speed - 2.2 kw material feeding motor - 2.2 kw blower - 2 kw vibrator motor - 4 kw granulator motor -productivity 100 - 130 kg / hour - automatic feeding

Year of construction: 2022, operating hours: 800 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 14121, Gamma Axial sells Profteq welding line from Fom Industrie consisting of: SA 44V vertical 4-head welding machine, with welding seam limitation to 0.2mm Transport table and turning of the welded frame for deburring TGV FRT 5 deburring center Pre-welding gasket milling machine GM-202 from Artikon Cobvl Dsv Rnqgokajgt The machines were purchased by us at the end of 2022. In January 2023 they were put into operation and since May 2023 they have not been used because welding machines without deburring were also purchased from Graf Synergy Sale price 120,000 EURO + VAT The machines are also sold separately: SA 44V 4-head welding machine - 60,000 EURO + VAT Transport table and turning of the welded frame for deburring TGV + Deburring center deburring FRT 5 - 65000 EURO + VAT Pre-weld gasket milling machine GM-202 - 4500 EURO + VAT

Year of construction: 2011, Condition: used, Functionality: fully functional, - equipped with 25 knives on 2 axes - feed opening W 1000 mm, L 800 mm - 2 conveyor belts - magnetic separator Cobvjv N N Iwsl Dkasgt - grinding mill with 48 rotor knives and 4 stator knives - screw conveyor - big bag support - productivity 120 kg/ hour VAT deductible