Used Planer-type milling M/C - double column for sale (121)

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH20 Djbevy A Tbj Eylq Eokl Spindle power: 45 kW Spindle speed: max. 25,000 min-1 Torque: 67 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y, Z axes: up to 60 m/min Axis acceleration X, Y, Z axis: up to 5 m/s2 Connection data Connection power: 180 kVa Pre-fuse: approx. 290 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Description: Additional equipment - Coolant supply with belt filter system - 50-way chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Condition of the Machine Fully functional, very good condition. Already dismantled and stored.

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, Functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22 Debsr E D Eao Eylq Eekl

Condition: refurbished (used), Functionality: fully functional, Machine type: Portal milling machine LF3550/4000CS Year of manufacture: 1966 / overhauled 2010 Manufacturer: Waldrich Siegen Control: CNC840D-Powerline Storage location: Gera Country of manufacture: Germany Dsb Eyljrvx H Rsq Ejkl Freight basis: ex stock location / in Germany + VAT Technical Data: Travels X-axis 14.000mm table lengthwise Y-axis 4.480mm slide-transverse Z-axis 3.000mm crossbeam vertical W-axis 300mm quill vertical Max. clearance: transverse 3,200mm high 3.800mm Machine table: Length 14,770mm width 3.100mm max. table load: 145 tons Quill: Tool taper: ISO60 power 100KW max. torque max. speed 600 rpm Rapid traverse: X-axis 12m/min Y; Z-axis 6m/min Attachment heads: Clamping: manual Designation: Right-angle milling head (ISO60) Orthogonal milling head (ISO60) Notes: Table guide hydrostatic New hydrostatic design calculated for max. load 450 tons (with uniform load) Further attachment heads available that were not previously used

Condition: good (used), Year of construction: 1984, Milling machine - horizontal drilling machine Brand: Bohle Type: BWS 120 Year of manufacture: 1984 Voltage: 380 V Power: 22 kW Dkjb Eylqevvldne Eel Longitudinal displacement in X: 1800 mm Transverse movement in Y: 600 mm Vertical movement in Z: 600 mm Overall dimensions: 3.80 mx 5.4 mx 3.2 m Weight: 9500 kg

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools Deb Eylqovwgm He Eokl - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: used, Used CNC face milling machine Manufacturer: Line (France) Year of manufacture: unknown, converted around 2000 Control: NUM 1060 (retrofit to new control probably necessary) Travel X (table travel): 8000 mm Travel Y (cross): 4000 mm Travel Z (head): 500 mm Travel W (vertical travel of cross slide): 2000 mm Djb Eevk Uh Ssylq Eskl Between the columns: 3200 mm Table size: 8000 x 2800 mm Max. workpiece height: 2500 mm Machine with integrated horizontal and vertical head Milling head with ISO 50 spindle All axes on ball screw Table travel - also with ball screw Estimated machine weight: 100 - 120 tons All guides in good mechanical condition

Condition: used, Year of construction: 2010, 5 axis machine - but only 3 axes X/Y/Z work, Huron KX 50, Year of manufacture 2010, Control Heidenhain iTNC 530, Deb Esv Hnuweylq Eskl Travel path X/Y/Z 2000/1700/800 mm, Spindle speed up to 20,000 rpm, HSK A 63, Table clamping area 2200 x 1000 mm, max. Ww 30 times, Tool laser, 3D measuring probe, Roto Clear, Vibration control, Oil mist extraction,

Condition: used, Year of construction: 2001, x-travel 4200 mm y-travel 2750 mm z-travel 1650 mm Control Fidia C20 total power requirement / kW weight of the machine ca. 40 t required space L9,5 x B5,9 x H6,4 m Handtmann NT 300 / 220 T: - Year of construction: 2001 - Traverse paths: X - axis approx. 4,200mm, Y - axis approx. 2,750mm, Z - axis approx. 1,650mm, °C axis approx. +/-275° and A axis +95° / -120° - Fixture space: approx. 3,000mm x approx.2,200mm x approx.980mm - Table size: 3,000mm x 2,200mm with T-slots in a 150mm grid - Table load: 1,000kg / m² table surface - Working and rapid traverse speed: max. 20m/min Deb Eyeuddhcolq Ejkl - Controller: Fidia C20 - Spindle: HSK 63 from Fischer (Switzerland), 24,000 rpm (grease lubricated) - Spindle hours: 6,939 hours (as of 05/16/22) - Total hours: 76,793 hours (as of 05/16/22) - Tool changer: 2 tool magazines with 30 tool places each, max. - - Tool weight 4kg, max. tool diameter 80mm or Ø125mm if no two sister tool places, max. tool length 280mm cover plate pneumatic - Cooling: tool spray device with a container of 19.5 l, spray head with adjustable output 0.04 - max. 2.3l/h - Tool control: Blum Laser - Wireless probe: Manufacturer M&H, type 25.10, year of construction 2021 - Exchange ball screw X - axis 10.07.2018 - Telescope cover 26.02.2019 exchanged on one side Machine dimensions: Length approx. 9,500mm (without housing) Width approx. 5,900mm Height approx. 6,400mm (Z axis extended) Weight: approx. 40,000kg

Condition: like new (used), Year of construction: 2019, operating hours: 3,944 h, Functionality: fully functional, Controller NCT304 (Touch screen, USB, 19 inch screen) Table size 2000 x 1400 mm Nod of T slots x sizes x distances 9 x 22 x 160 mm Table load max 6000 kgs Distance between spindle and table surfaces 200 - 1000 mm Distance between columns 1650 mm Position accuracy < 0.02 mm Repeatebility < 0.008 mm The X / Y guides are cylinder rollers 2 / 2 The Z guide is flat guide X travel 2100 mm Y travel 1500 mm Z travel 1000 mm X / Y / Z rapid speed 20 / 20 /15 m/min Feedrate 15 m/min Spindle speed 10000 rpm Tool holder type:SK50 Direct drive system No of speed ranges 2 Spindle power 22 kW ATC magazin 30-fold (arm type) Max tool length 400 mm Max tool dia 125 (215) mm Max tool weight 20 kg Floor requirements LxWxH = 6000 x 4600 x 4200 mm Weight 23500 kgs Accessories, features - CTS - Coolant tank - Chip conveyor - Angle head (manually adjustable) - Arm type tool changer - Lighting of working area - Washing gun - Manuals Djbjtr E A Ue Eylq Eekl The machine is in very good and almost new condition. Still under power and ready to buy immediately.

Condition: good (used), Functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, table length: 3,000 mm, table width: 1,200 mm, spindle speed (max.): 18,000 rpm, table load: 6,000 kg, spindle nose: HSK A 63, Numerical control HEIDENHAIN 426 Table dimensions mm 3000x1200 Table capacity kg 6000 X-axis longitudinal travel mm 2800 Y-axis transversal travel mm 1600 Z-axis vertical travel mm 800 X/Y/Z linear axes rapid feeds m/min 35 Spindle power kW 18 Spindle speed rpm 18000 Dkobjvw A Dns Eylq Eol Tool magazine 40 positions Tool attachment HSK A63 Total installed power kW 68.7 COMPLETE WITH: -Roller guides -Internal spindle high pressure 20 bar -Automatic 5-axis continuous bi-rotary head -Chip conveyor USED MACHINE

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top. Dksb Ejvwgmmoylq Eol

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area Djb Eehqhlvoylq Ejkl -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 6,500 mm, travel distance Y-axis: 2,500 mm, x-6800 mm y-3400 mm z-2000 mm Control: TNC 530 Table size - 6000 x 2500 mm Workpiece max 10000 KG Tool changer 1x40 pcs Sk50 1x40 pcs HSK 63 Machine weight 80 tons Dkob Eouh Uw Aoylq Eel Space requirement approx. 12 x 11 x 7 m 4 different tool heads can be changed automatically! Internal cooling max 40 bar with filter system 2 chip conveyors further technical information on request

Condition: used, Year of construction: 1998, x-travel 6000 mm Djb Eyju I E Emolq Eokl y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min Djb Ejvkit Ajylq Ejkl creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,000 mm, travel distance Y-axis: 30,000 mm, travel distance Z-axis: 1,000 mm, Unisign Uniport 6000 portal milling machine, Year of manufacture 2005, Control Siemens 840 D, Travel X/Y/Z 3000/3000/1000 mm, C axis for turning, Table Ø 2500 x 2000 mm, Max turning Ø 3000 x 2500 mm, Max. turning height 1000 mm, Angle head for lateral machining, 2.5° Hirth toothing, Spindle speed up to 6,000 rpm, Spindle power 36 KW, Holder HSK 100, Dsb Eovwmlieylq Eokl 30-way tool changer, 3D measuring probe, Chip conveyor, Faceplate Ø 2000 mm, Max. load faceplate 10,000 kg, Machine weight 45,000 kg,

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be Dkob Eylqsvwgmgj Eol can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: new, machine/vehicle number: 28xxxx SDU 8300, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 350 mm, iMG 1510 X5 | 5-axis simultaneous milling machine The metal/granite sandwich construction for the moving axes such as the portal and traverse can be driven either by AC servomotors via ball screws or by linear motors. In conjunction with high-precision linear guides, it forms the basis of the solid steel/granite machine construction. The advantages of natural stone granite in combination with high-strength light metal offer maximum rigidity with simultaneous weight savings. This is the only way to achieve the desired dynamics and high feed speeds. High-frequency spindles with 1.5 KW, 2.0 KW or 4.0 KW and 40000 or 50000 rpm with HSK25 mounting are used as milling spindles. The 10-position tool changer installed outside the working area moves automatically from the protective housing to the milling spindle. With the 4th/5th axis as a fork head design and the integrated high-precision gear drive modules, almost all positions of a complex workpiece can be reached with the milling tool. The machine is rounded off with new state-of-the-art CNC control functions and an easy-to-operate user interface. These allow simultaneous 5-axis machining via the RTCP function (Rotation Tool Center Point). The control and operating components from Heidenhain include a touchscreen monitor and a convenient manual control panel. Different workpiece clamping systems can be mounted on the universal granite table using steel threaded bushes with a 150x150 mm grid, or a T-slotted plate can be used. Features: - Metal/granite sandwich construction - Rotating and swiveling cable head (4th and 5th axis) - Highly dynamic linear motors in X and Y axes - 18-position tool changer expandable to 36 tools - Heidenhain® TNC640 high-end control system - Tool measurement by toolsetter or laser - 3D edge finder - Handwheel - Modern control panel Options: - Water cooling - Heidenhain LMT TT160 / optional laser measurement - 3D measuring probe - handwheel - Minimum quantity cooling - Tool holders Other sizes: iMG1010X5 | 1000/1000/350 iMG1510X5 | 1500/1000/350 iMG2010X5 | 2000/1000/350 iMG2015X5 | 2000/1500/350 Dobep H Tiae Eylq Ejkl

Condition: used, Year of construction: 1965, Dimensions (L/W/H) 10460,0 × 5715,0 × 5537 mm Dkeb Eylqsuh E Tbs Ejl spindle head adjustment horizontal 3160 mm spindle head adjustment vertikal 1000 mm hobbing length 2250 mm weight of the machine ca. ca. 76660 kg t

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing Debevvh T Se Eylq Ejkl TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

Condition: good (used), Year of construction: 2010, operating hours: 720 h, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 3,000 mm, Reserve price removed - guaranteed acceptance to the highest bidder.  TECHNICAL DETAILS Travel path X: 2,000 mm Travel path Y: 3,000 mm EQUIPMENT - High frequency spindle - 2 x Kuka KR 210 R2700-2 / reach 2,700 mm Nominal load capacity: 210 kg / Year of manufacture 2001 + 2002 - Enclosure Dsbovuzxlo Eylq Eskl

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, Functionality: fully functional, machine/vehicle number: 2023AB2200134, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, table length: 6,000 mm, table width: 800 mm, power: 11 kW (14.96 HP), PFEIFER technology skyCNC Milling Machine Center 6008 - 5 ATC - Available immediately, ready for use by the user, sold due to conversion Dkob Eyljrh Ix Hjq Esl CNC milling machine - high precision and powerful 6000 mm x 800 mm x 300 mm (clearance height under portal 300 mm + max. tool length 300 mm) High precision - milling and drilling at extremely high speed and quality. Incl. automatic 5-fold optional 10-fold tool changing system - pneumatic tool change, BT40 tool holder Incl. device for dust extraction on the spindle (integrated in the spindle housing) and connection piece for connection to the local extraction system including HPM minimum quantity lubrication/spray cooling, for cooling workpieces and tools; automatic Can be controlled by a solenoid valve via M code Incl. 5 x tool holder BT40 and 5 x collet chuck including central lubrication access including automatic tool length measurement Incl. mobile MPG control unit for quick and easy control of the machine, workpiece zero points freely selectable, Ethernet connection for data transfer via network, USB connection File formats: G-Code, DIN ISO data Incl. industrial computer system with 17" TFT touchscreen and PC keyboard and mouse HF spindle: 15 HP 11kW, air cooled Spindle speed: 3,000 - 15,000 rpm ES951 A 1112 S Power connection: 3 phases AC 400V / 50 Hz Power consumption: max. 14 kW need 7 bar / compressed air connection including air filter Dimensions (LxWxH): 6850 x 1440 x 2163 mm Weight: approx. 3250 kg

Condition: new, FEATURES: • solid and stable machine construction made of ground granite components • small footprint due to compact design high frequency spindle with up to 2 kW power and 50.000 rpm Dksb Eylelnk E Ssq Esl • HSK-E 25 change system • HSC control technology with a block processing time in real time < 1 ms • high path accuracies due to digital length measuring system • high load linear guides • low maintenance linear motors in X, Y, Z • Heidenhain® TNC 640 control • zero point clamping system in the granite table for fast change from 3 to 5 axes OPTIONS: • 3D measuring probe for detecting workpiece zero points or re-measuring workpieces • laser for non-contact tool control • high frequency spindles up to 100.000 rpm 4th/5th axis as rotary/swivel axis • Minimum quantity cooling lubrication system • Various controls from Heidenhain® • Manual control unit Professional CAD/CAM solutions The PREMIUM 5030 is a 3 to 5-axis HSC milling machine, that is specially designed for the requirements of highprecision processing of fine mechanical small parts, microprocessing and milling graphite/copper electrodes. In order to meet with this demand for accuracy, all essential points are integrated in the machine concept for reliable production. The solid machine base, consisting of a natural hard rock granite portal with decoupled Y-axis, guarantees high stiffness and long-term stability. The individual granite elements are produced with an accuracy per DIN 876 / quality 00. The pioneering linear motor technology and the incremental measurement process guarantee maximum positioning accuracy with highly dynamic feed rates. Fastest control technologies (high-speed cutting) guarantee harmonic rail movements with maximum precision and simple user guidance.

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. Dksb Esvvh R Djylq Esl TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing.   The machine is in operation and can be inspected on site. A video of the machine is available.

Condition: excellent (used), Year of construction: 2017, operating hours: 9,380 h, Functionality: fully functional, machine/vehicle number: 4455, travel distance X-axis: 3,740 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 60,000 rpm, Reserve price removed - guaranteed to go to the highest bidder. TECHNICAL DETAILS X-travel: 3740 mm Y-travel: 2800 mm Z-travel: 480 mm Control: Siemens Sinumerik ONE - HMI Operate user interface, WIN 10 Spindle speed: 60,000 rpm Spindle axis manufacturer: GMN Extraction: Ruwac Zone 22 Extraction hood: rigid or height-adjustable EQUIPMENT - 1 Kuka KR 420 R3300 robot / reach 3326 mm, nominal payload 420 kg - 1 Kuka KR 200 L140-2comp robot / reach 2800 mm, nominal payload 140 kg - 1 Kuka KR 140-3comp robot / reach 2400 mm, nominal payload 140 kg - Conveyor belt for transporting the scrap metal Dksbevuztis Eylq Eel - Chip conveyor belt