BENDING PRESS

CERVINO

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit Kjdpfx Adsd Inkto Nedg - Milling unit - Fine trimming unit - scraper - buffing unit

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 288, I am selling a Cehisa SYSTEM 4 edge bander, manufactured in 2006, first owner. Excellent condition. Technical parameters in the attachment. Kdedpfx Adev Hc Dge Neg

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Kdodpfxewx Rrnj Ad Njg Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works.

Condition: excellent (used), Year of construction: 2000, I sell the format sliding table saw with scoring SCM SI 300N, year 2000. Sliding table length 3200mm. Max. cutting width on cross fence 1950 / 2850mm. Max. cutting width on parallel fence 1270mm. Motor 5,5 kW. Max. saw blade diameter fi.300x30mm Max. scoring saw blade diameter fi.120x20mm Kdedpoiu Awbefx Ad Njg Main blade (scoring blade) 4000 (8000) rpm. Condition very good. Avialable immediately. Please contact for more photos and details.

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Kdedjxya Rtepfx Ad Neg Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Kdsdpjw Idc Rjfx Ad Nog Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: ready for operation (used), Year of construction: 2003, Brandt Edge Banding Machine Type: Profi KDF 670 Single-sided edge banding machine in right-hand configuration suitable for craftsmanship, for hot-melt adhesive application. Quick-change gluing module for processing PU glue granulate in compliance with adhesive processing regulations. Infrared hot-melt glue activation Automatic edge magazine for coil material for thick PVC/ABS Heavy-duty pressure zone Centrally adjustable top pressure Operating panel at machine infeed PC 16 electronic control Technical Data: Edge thickness: 0.4 - 8 mm Roll cut, max. 3 x 45 mm or 0.8 x 60 mm Workpiece thickness: 8 - 55 mm Feed rate: max. approx. 14 m/min Tool set R = 2 mm (exchangeable for R = 3 mm) Quickmelt gluing module Motor-driven height adjustment for top pressure - PC 16 Adjustable infeed fence Program-controlled adjustment for infeed fence Additional unit for laminate overhang Program-controlled pressure zone Release agent application for workpiece Jointing milling unit Ksdpfxjx Nrtnj Ad Njdg Jointing cutter set, Dia End trimming unit with chamfer/straight cut 0 - 15 degrees Pneumatic adjustment for end trimming unit, chamfer/straight Flush milling unit Pneumatic adjustment for milling unit Pneumatic two-point adjustment for vertical tracing rollers Jointing unit 0 - 25 degrees, synchronous flush milling Radius cutter set (exchangeable for chamfer cutter) Program adjustment for edge thickness Pneumatic adjustment for side tracing rollers Profile milling unit above and below - For profiling/flush trimming of end edges on post- and softforming parts and corner rounding of thick PVC edges. / Wood edges possible to a limited extent Scraper with quick-change heads Pneumatic adjustment for scraper Flat scraper glue joint Cleaning agent application for workpiece Buffing unit, 2 motors Electrical and mechanical preparation of the edge banding machine for integration of Ligmatech workpiece return conveyors ZHR01/ZHR02/ZHR15 Weight: 3000 kg Total connected load: 15 kW Length: 5880 mm Location: ex-site customer - Immediately available - System must be dismantled by the buyer

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: limited functionality, Machine was fully working condition in 2021. Then dismantled and stored in warehouse. LEFT side Kedpfxjxu H S Tj Ad Njdg

Condition: used, Year of construction: 2011, Type KDF 220 C Year of manufacture: 2011 Units operated from the display Gluing unit Cross-cut saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-50 mm Feed speed: 10 m/min Total power: 9.5 kW Kdodpexc N Hvefx Ad Neg Length: 4150 mm Weight: 1150 kg €19,990 including VAT, shown separately on the invoice

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and technical specifications: Gluing max. 8-55 mm Including rotating control panel Dual-motor HF joining unit Including replaceable, Teflon-coated rapid heating tank Including electronically controlled positioning of the pressure rollers Including pivoting double cross-cut saw unit Including flush trimming unit Including application-controlled bevel, radius, and corner rounding unit with nesting package Including radius scraper with nesting package Including flat scraper Including grooving unit Including buffing unit Including spray unit Location: Hesse Availability: Upon request Kodpfx Asw Nadgsd Nodg !Sold on behalf of customers!