Used other lathes for sale (236)

Condition: reconditioned (used), Year of construction: 2006, operating hours: 13,584 h, turning diameter over cross slide: 770 mm, turning length: 1,043 mm, turning diameter: 550 mm, spindle bore: 116 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 37 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,050 mm, total length: 42,640 mm, total width: 22,000 mm, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, 2-axis CNC lathe “DOOSAN mod. PUMA 400B” with Fanuc 21i-TB CNC Boljtvprceiktrzjwl

Condition: good (used), Year of construction: 1990, CNC lathe RAMO TN2 1990 Many accessories Bweljqy Ey Ueiktrzol

Year of construction: 1965, Condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Bolsvy E A Sjiktrzowl

Condition: used, tool clamping area 300x55x85 mm Bwolijgqg Rxsktrzsl weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ----

Condition: as good as new (ex-display), Year of construction: 2014, operating hours: 109 h, Functionality: fully functional, machine/vehicle number: 180178, Equipment: documentation/manual, OKUMA LU3000EX MY 2SC950 Additional Options Big bore spindle with: * Main spindle motor VAC 22/15kW (30min/cont) * Spindle speed 42-4200rpm * Spindle bore dia.91mm, bearing ID 140mm JIS A2-8 nose Bolikor Hn T Rotrzowl Pre-arrangement for chip conveyor, side disposal Chip conveyor, side chip disposal H-type High pressure coolant pump MTH2-50/5 Hydraulic hollow chuck B210A8, hollow cylinder SS1770, draw tube and all necessary parts OSP Suite Machining Navi L-G (software, microphone and USB cable only)

Year of construction: 2005, Condition: excellent (used), machine/vehicle number: 1040047, 6 axis CNC lathe twin-spindle, motorized tools and motorized tools and C axis TAKAMAZ XY-1000 FANUC 18I-TB Accessories: chip conveyor. No. 2 motorized tools (1 axial + 1 radial) various static tools. static. Bjlijgbvdtjktrzowl Piece collecting hand, bar loader Cucchi mod. CNC-DB

Year of construction: 2008, Condition: ready for operation (used), Turning diameter over bed: 300mm, max. workpiece length: 500mm/600mm, travel X: 319mm, feed X/Z: 3000mm/min/4000mm/min, rapid traverse X/Z: 4000mm/min/5000mm/min, speed: 4000rpm. Collet chuck: 5C 173E, spindle bore: 40mm, tool positions: 4, spindle travel of tailstock: 110mm. Machine dimensions X/Y/Z: approx. 2000mm/1450mm/1500mm, weight: approx. 1200kg, control: Fanuc Series 0i-TC. Including 380V transformer, Fluidtec spraying system, collet set and multifix holder set. Documentation available. On-site inspection is possible. Beliktrou T Rifozswl

Condition: used, tool clamping area 200x55x195 mm weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ---- Beliegqg Rujktrzjwl

Year of construction: 2015, Condition: excellent (used), machine/vehicle number: 3861, 9 axis CNC lathe with motorized turret BMT55 with Y-axis, rear slide with motorized tools, Y1 and Y1 and B-axis, counter spindle QUICK-TECH T8-HYBRID (Y) MITSUBISHI M720VS Accessories: Chip conveyor belt workpiece collecting hand with workpiece conveyor, high pressure system 25 bar, automatic bar loader automatic IEMCA MASTER 80 HF-33L Bweliktogcuyxjrzjl

Year of construction: 2002, Condition: ready for operation (used), A Danobat CNC vertical lathe including accessories is available. Workpiece diameter: 200mm, workpiece turning diameter: 300mm, roller bearing inner diameter: 140mm, spindle inner diameter: 50mm, chuck diameter: 210mm, speed: 4700rpm. Tool positions: 8, feed X/Z: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2000mm/3000mm, control: Siemens Sinumerik 810D. Including pick-up function and pallet magazine EWAB. Documentation available. On-site inspection is possible. Bsliktrovdu H Ujzjwl

Condition: used, tool clamping area 300x55x85 mm weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. Boliktsgqlkgerzjwl --- price per piece ----

Year of construction: 1997, Condition: ready for operation (used), Turning diameter over bed/over slide: 400/220mm, turning length: 1000mm, control: AXESTA, with three-jaw chuck. Bwsliktsumwhverzsl

Year of construction: 1992, Condition: ready for operation (used), Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025. Bjliksu D H Hwetrzewl

Year of construction: 2007, Condition: ready for operation (used), Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available. Bwelikjr Nd Ekstrzel

Year of construction: 1995, Condition: ready for operation (used), Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016. Bjliktretdwwmszowl

Year of construction: 1996, Condition: ready for operation (used), Center width: 1500mm, max. turning diameter: over bed: 500mm, over cross slide: 290mm, max. spindle speed: 2800rpm, control: Monforts Control-System K, weight: 3300kg. Including Coromant Capto with inserts, workbench without tools, grating. Bweliktroti Adujzsl

Year of construction: 1972, Condition: ready for operation (used), Rotation diameter over bed: 530mm, turning length: 800mm, center distance: 1000mm, bore: 63mm, max. quill adjustment: 225mm, speed: 900rpm, spindle power: 15kW. Machine dimensions X/Y/Z: approx. 2700mm/1400mm/1300mm, weight: approx. 3300kg. Documentation available. On-site inspection is possible. Boliksuiyk Rotrzjwl

Condition: ready for operation (used), A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible. Boljvu Ddwsiktrzjwl

Year of construction: 2003, Condition: ready for operation (used), An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible. Bjlikovva Hkotrzewl

Year of construction: 2003, Condition: ready for operation (used), Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg. Bwjliktrstdwwqszol

Year of construction: 1955, Condition: ready for operation (used), A Froriep horizontal vertical lathe that was completely overhauled in 2009 is available. Faceplate diameter: 1250mm, turning height: 1100mm, circulation diameter over bed: 1400mm, power: 38kW, container volume: 1000l, control: Siemens S7. The machine has undergone extensive mechanical and electrical overhauls, including a new lubrication and cooling system and a new paint job. Documentation available. On-site inspection is possible. Bweliou S I E Ijktrzol

Year of construction: 1978, Condition: ready for operation (used), A barely used Weiler precision lead and feed spindle lathe is available. Turning diameter over bed/slide: 250mm/180mm, turning length: 450mm, spindle clearance: 23mm-24mm, speed: 3000rpm, drive power: 1.5kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 600kg. Including accessories. On-site inspection is possible. Belikteuyk Scsrzswl

Condition: ready for operation (used), Rotation diameter over bed/face slide: 710mm/410mm, turning length: 2000mm, center height: 350mm, spindle bore: 92mm, speed: 1800rpm, quill diameter: 210mm, rapid traverse X/Z: 8m/min/10m/min, feed: 5m/min, feed force: 2000daN. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5600kg. Documentation available. On-site inspection is possible. Bwsliksvnd Trotrzel

Condition: ready for operation (used), Turning diameter over bed/bed slide: 600mm/320mm, turning length: 820mm. Including parts catcher, steady rest and tailstock. Bwjlikjt Tfaaetrzjl

Condition: ready for operation (used), A CNC-controlled REM vertical lathe is available. Working diameter: 2500mm-7000mm, working height: 1000mm, control: Siemens 840D. Including driven tools. On-site inspection is possible. Bjliktrsvriq Dszswl