Used International 845 Xl for sale (28,728)

Condition: used, mileage: 594,000 km, power: 331 kW (450.03 HP), first registration: 08/2015, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 03/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mercedes Actros 1845 4x2 Lowliner tractor unit, Euro6, automatic gearbox, retarder, safety package, stream space cab, air-fed, tires VA 355/50 R22.5 HA 315/45 R22.5, 2 tanks, air conditioning, auxiliary heating, refrigerator compartment, EFH Belowgulheq T I Dkjwl

Condition: reconditioned (used), Year of construction: 2003, currently 14 (of formerly 17) identical machines still available mechanically revised machine with new LTG StoreControl L control system External dimensions: Overall height 8,450 mm (customization possible at additional cost) Overall width 2,805 mm Overall depth 2,810 mm Bslen D A I Tjq T I Dkjwl 50 carriers with 250 kg payload each in the clear usable dimensions: W = 2,450 mm D = 825 mm H from 55 to 750 mm Total machine load up to 2 x 15,000 kg Start of operating opening at 890 mm above OKFF, then 875 mm high Colour CREAM WHITE / BLUE, support beams galvanized, surfaces cleaned, traces of use possible Performance values: Vertical drive 1 x 5 kW / 400 Volt Horizintal drive 1 x 0.55 kW / 400 Volt subject to errors, technical changes, deviations in detail from the photos Delivery and installation currently mainly in Germany, Austria and several neighboring countries Basic machine: LEANLIFT 2460-825

Condition: new, New device MASS International Angle conveyor belt NS3 L-conveyor belt / assembly line available at short notice, Description: Feed section 600 mm Rising section 1300 mm Usable width 450 mm Outside width 505 mm (without motor) Height adjustable Discharge height 750 - 1050 mm Angle between feed section and rising section adjustable 30 - 50° L - studs Stud height 30 mm Stud spacing 500 mm PU belt Bwslqer A D Ihj T I Dkel Color black Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Belqjtx Ux Rj T I Dkjwl Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Punching Up to 30,000 – 40,000 sheets per hour Sheet Lift Adjustable from .5mm to 1mm Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA)

Condition: good (used), For sale is a directional jet agitator from Stelzer Rührwerke International GmbH. It is the model SM460-DF. Bslqofr Icue T I Dkewl Product data: 1455 R.p.m. 400V 18,5 kW Shaft length 720mm Blade diameter 280mm For further data see type plate (photo)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified. Belq T I Dofhgvwokswl

Condition: good (used), Schmedt PraLeg HHS 1840 XL Case in machine Machine in perfect condition, purchased from the national library. Practically unused. Bwslq T Iewdrrte Dkol The machine suspends the book block in a prepared hard cover. Two gluers, smooth adjustment of glue thickness. The machine has full documentation with a CE certificate. Format: Block height: 80 – 440 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Efficiency approx. 200 – 300 pcs/h Power supply 230V Weight 300 kg

Condition: good (used), Year of construction: 1987, Functionality: fully functional, Ipsen Industries International GmbH Protective gas generator, G 1500 E Model: G1500E Bolq T Isudlgtj Dkjwl Year of construction: 1987 Technical data: Heating: electric Reaction gas: Propane Gas overpressure min.: 10 mbar Gas overpressure max.: 50 mbar Working temperature min.: 980°C Working temperature max.: 1020°C Total electrical data: Rated voltage: 380V AC, 3-phase Rated current: 60A Frequency: 50Hz Power: 22kVA Electrical data heating: Rated voltage: 380V AC Rated current: 52A Frequency: 50Hz Power: 20kW

Condition: new, New device MASS International NS3 Speciale Angle conveyor belt with Supergrip belt and separator available at short notice Description: L-conveyor belt with double roller separator Feed section 600 mm Rising section 1300 mm Usable width 450 mm External width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Bwjlq T I Dslrqiujkol Adjustable angle in the feed section, as well as in the incline PU belt Black Supergrip Belt speed 3 m / min Mobile on steerable stop rollers Side collecting plates in the feed section Double roller separator with covered belt drive Coated with Super Grip Adjustable discharge chute Can be ordered optionally: Belt with FDA approval Other dimensions etc..

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Length: 145 cm Width: 45 cm Bwslq T Iewb Spgj Dkol

Condition: like new (used), Year of construction: 2017, Perfect condition, Semi Automatic double clipping machine, with loop inserter Belowfgivjq T I Dkewl

Condition: new, Year of construction: 2024, operating hours: 35 h, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material Bwolq T I Defnlkwjkel • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, Year of construction: 2022, For sale is a CTM CT 200 tank from MASS. This is available in different sizes (see pictures). Bjloip Ucnjq T I Dkewl

Condition: good (used), Year of construction: 1979, Functionality: fully functional, Ipsen Industries International GmbH Protective gas generator, G 750 E Model: G750E Year of construction: 1979 Bsloudlhqjq T I Dkowl Electrical data: Rated voltage: 380V AC Frequency: 50Hz

Condition: new, New device MASS International Angle conveyor belt NC3 available at short notice Description: Feed section 600 mm Rising section 1300 mm Usable width 450 mm Outside width 505 mm (without motor) Bjlqok Ixlue T I Dkjwl Height adjustable discharge height 750 - 1050 mm Angle between feed section and rising section fixed 45° L - studs Stud height 30 mm Stud spacing 500 mm PU belt Color black Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section

Condition: good (used), mileage: 26,002 km, power: 142 kW (193.07 HP), first registration: 02/1995, fuel type: diesel, number of seats: 9, gearing type: automatic, axle configuration: 4x2, emission class: euro1, color: orange, suspension: steel, wheelbase: 7,020 mm, Year of construction: 1995, Equipment: onboard kitchen, power assisted steering, = Additional Options and Accessories = - Roof Hatch Bwjlq T Iewb Huwj Dksl - Extra Lighting - Side Windows = Additional Information = General Information Odometer Reading: 16,157 Miles Technical Information Number of Cylinders: 8 Engine Displacement: 7,276 cc Axle Configuration Suspension: Leaf Spring Front Axle: Max. Axle Load: 4,536 kg; Steered Rear Axle: Dual Tires; Max. axle load: 8616 kg Mass Dimensions (L x W): 1152 x 245 cm Weights Curb weight: 7,160 kg Payload: 5,992 kg GVWR: 13,152 kg Maintenance, history and condition APK (main technical inspection): tested until 06.2025 Technical condition: good Visual condition: good = Company information = Nidro cars Holland is located in the center of the country and is the right address for the purchase of your car, van or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: LOOK FOR OUR ENTIRE STOCK AT All trade is possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, Functionality: fully functional, In this offer you buy a used accessory ‘Canon POD Deck Lite XL-A1’ Object of sale: 1 x Canon POD Deck Lite XL-A1: For various Canon imagePRESS models Condition: Bolqsv R Tx Ne T I Dkowl This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Belqjif Ek Ro T I Dkowl Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, New device MASS International Bjlq T Ijiz S Hts Dkowl Z-conveyor belt NDZ3 Angle conveyor belt / conveyor belt available at short notice Description: Height-adjustable angle conveyor belt with adjustable angles Feed section 600 mm Rising section 1300 mm Discharge section 500 mm Useful width 450 mm External width 505 mm (without motor) Height-adjustable discharge height 700 - 1000 mm Adjustable angles for feed section and discharge section Adjustable incline PU belt Color black L studs Stud spacing 500 mm Stud height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section

Condition: new, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 3, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Belq T I Dewgc I Rokswl Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, New device MASS International Angle conveyor belt NDS 2 L conveyor belt/conveyor belt available at short notice Angle conveyor belt with adjustable angles Bwelq T I Dsr A D S Ejksl incl. paddle separator and collecting plates in the feed section Feed section 600 mm Rising section 1300 mm Discharge section 800 mm Useful width 350 mm Outside width 405 mm (without motor) Height adjustable Discharge height 700 - 1000 mm Adjustable angles for feed section and discharge section Adjustable incline PU belt Super Grip Belt speed 3 m/min Mobile on steerable stop rollers Side collecting plates in the feed section Paddle separator separately controllable and height adjustable

Condition: new, New device MASS International Deposit conveyor NPS Conveyor belt/deposit belt Available at short notice Deposit area without side wall Height adjustable, movable on steerable stop rollers Example: NPS 1 Length 1500 mm Useful width 250 mm External width 250 mm (without motor) Deposit area without side wall, therefore full usable width Bwolq T Ioizi S De Dkel Height adjustable Delivery height 200 - 400 mm PU belt Smooth, black Belt speed 3 m /min Movable on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Changed belt speed etc.

Condition: new, New device MASS International Color mixer / Batch mixer Mixer for plastic granules available from stock at short notice Mixer MV 2: Steel version Capacity 200 liters / 120 kg granulate Length 700 mm Width 700 mm Height 1050 mm (incl. control panel 1250 mm) mobile on steerable stop rollers Removal opening for suction lance on both sides, additional drain opening at the bottom, Safety switch on inlet cover and drain opening, Height adjustable in 25 mm steps, Inspection window to check fill level Bwelqeu Ti Tvj T I Dkol Control via control panel Interval and continuous mixing adjustable MV batch mixer for complete mixing of the entire plastic granulate. Ideal for mixing in additional components such as color batch, additives, fillers, etc.. Due to the forced guidance through the screw sleeve, the entire plastic granulate in the mixer is in the flow, plastic granulate in the mixer is in the flow and mixes completely with the additional completely mixed with the additional components within a short period of time. No "dead" corners are formed, as is the case with conventional screw mixers / agitators.

Condition: new, New device MASS International Rotary distributor/ rotary chute Model SR immediately available Bwolju Ti Tpjq T I Dkjl Control unit, incl. touch panel Rotary distributor for the controlled removal of parts. Can be ideally combined with a deposit conveyor belt so that cartons or transport boxes can be intervals specified by the user, boxes or transport crates can be filled with finished parts. can be filled with finished parts.

Condition: new, New device MASS International Double roller separator S4600 ideal separator for small parts available at short notice Roll length 650 mm Height adjustable from 300 - 900 mm Bjlq Tsuip Nco I Dkewl Motor 400V / 50 Hz Adjustable in inclination, roller spacing, insertion height Stainless steel / polycarbonate covers Optional: Frequency converter for infinitely variable adjustment of the roller speed