Used Milling machines - univ.NC/CNC 400-499mm X-axis travel for sale (66)

KUNZMANN WF 4 / 3

Call

Condition: used, Preliminary info: Training machine: Uomnxdg8o 5354 KUNZMANN WF 4/3 Year 2002 TNC 124 Universal table with display Available at short notice

more

Listing

Eindhoven

7,560 km

universal milling machine

Condition: used, Milling machine Deckel FP3NC Manufacturer: Deckel Type: FP3NC Control: Dialog 4 Condition: used travels: X 400 / Y 400 / Z 400 mm quill stroke: 80 mm Benh0p0mxxa Speed: 40 rpm. Up to 3600 rpm. Swiveling milling head. Hydraulic tool holder vertical/horizontal SK40, the dividing head on the table is not included.

more

Listing

Mögglingen

7,995 km

DECKEL FP 3A

Call

Condition: excellent (used), Year of construction: 1987, Control Contour 3 Traverse paths X / Y / Z: 400 x 400 x 400 mm Spindle speed 4,000 min-1 SK 40 spindle holder Rigid angle table Bi7sojm78w

more

Listing

Hallstadt

7,976 km

Optimum F120X

€69,900

Call

Condition: as good as new (ex-display), Year of construction: 2019, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 120X CNC milling machine direct from the manufacturer. F 120X - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design High productivity Linear guides for high rapid traverse speeds in all axes 21-fold magazine tool changer High reliability Cast body made of quality Mehanite casting Cross table precision-ground with 3 T-slots Heavily ribbed, torsion-free machine base Precision-ground, preloaded high-performance Ihj02ot Ball screws in all axes High-torque servo drives directly on the ball screws in all 3 axes Electronic handwheel Chip conveyor Cleaning gun RJ45 plug connection, USB connection and power connection (230V) Coolant unit with 210 liter coolant tank Heat exchanger Options included: PPU 290 touch panel 16000rpm inline spindle with oil cooler Belt conveyor with chip cart Machine leasing possible via Siemens Finance. Liquidity prerequisite. Dimensions and weights Length approx. 2315 mm Width/depth approx. 2194 mm Height approx. 2325 mm Weight approx. 3800 kg Drilling/milling capacity Cutter head size max. 80 mm Feed/rapid traverse speed X-axis 40000 mm/min Y-axis 40000 mm/min Z-axis 40000 mm/min Electrical data Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Electrical connection Total connected load 45 kVA Distance vertical spindle - milling table min. 150 mm Distance vertical spindle - milling table max. 450 mm T-slots size 14 mm Number of T-slots 3 T-slot spacing 125 mm Max. load 250 kg Accuracy Repeat accuracy ± 0.006 mm Positioning accuracy ± 0.005 mm Cooling lubricant system Coolant pumps Coolant pump(s) Drive power 370W each Tank capacity 120 l Control system Type Sinumerik 828D PPU 290 System software SW 28x CNC memory 8 MB Block change time 2 ms Look Ahead 150 Number of tools 512 Travel distance X-axis automatic 500 mm Y-axis automatic 400 mm Z-axis automatic 300 mm Vertical spindle Spindle holder BT 30 Speed range 10 - 16000 min¯¹ Power drive motor continuous operation S1 12 kW Power drive motor S6-30 % operation 22.8 kW Torque drive motor continuous operation S1 38 Nm Torque drive motor 30% operation S6 116 Nm Feed motor torque X-axis continuous operation S1 6 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 11 Nm Servo tool changer Carousel type in front of the spindle Ce88fgp Number of tool positions 21 tools

more

Listing

Brigachtal

7,957 km

Maho MH500W

Call

Condition: good (used), Year of construction: 1988, Philips 432 control unit, SK40 tool holder, NC rotary table, vertical milling head, Dm2hxd

more

Listing

Bopfingen

8,016 km

CNC - Universal milling machine

Deckel Fp 1 Aktiv

Call

Condition: good (used), For sale is a Deckel Fp 1Aktiv in a well-kept condition. Viewing by arrangement, please contact us if you have any further questions. Maoc9x9tix

more

Listing

Uttendorf

8,224 km

DECKEL FP 3 A

€17,500

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 1981, Travel : X - axis 490 mm Y - axis 290 mm Z - axis 320 mm Table size 705 x 425 mm Spindle holder SK 40 Pinol stroke 100 mm Spindle speed 25 - 2500 rpm Feed speed 5 - 500 mm/min. infinitely variable Czwmd0i2 Machine has been converted to HEIDENHAIN control

more

Listing

Augsburg

8,081 km

Ruhla Duplex 3

Call

Condition: good (used), Year of construction: 1991, Machine no. 793 Table 700 x 400 mm Bzdjmtpn XYZ - 400 x 350 x 380 mm vertical milling head swiveling stroke 80 mm SK 40 rpm 45 - 2240 Weight approx. 2 to

more

Listing

Sonneberg

7,964 km

Deckel FP3A

€4,800

CNC universal milling machine

Call

Condition: good (used), Year of construction: 1988, machine/vehicle number: 2820-0354, Functionality: fully functional, Machine number: 2820 - 0354 Type: FP3A Control system: Contour 3 Bikg9lazkds Table: 700 x 480 mm rigid angled table Travel x-y-z: 400 - 315 - 400 mm Vertical head adjustment: 150 mm Quill stroke: 80 mm Mounting: SK40 Speed: 31.5 to 3,150 rpm Feed rate: 5 to 1,250 mm/min Rapid traverse: 2,600 mm/min Accessories/equipment: el. handwheel Condition: good Weight: 1.8 t Dimensions: 1,600 x 2,500 x 2,000 mm

more

Listing

Reiden

7,976 km

Kunzmann WF 4/3

Call

Condition: good (used), Year of construction: 2007, X-axis 400 mm Y-axis 350 mm Z-axis 400 mm spindle speed 4000 rpm table length 650 mm table width 350 mm table load 250 kg feed X-axis 5000 mm feed Y-axis 5000 mm Z-axis feed 4000 mm Line quill 60 mm Fast feed speed 0 - 2000 mm Qb2sx Length x width x height 1500 x 1800 x 1900 mm Weight 1500 kg

more

Listing

Ubstadt-Weiher

7,892 km

Kunzmann WF4/3 mit Heidenhain TNC 124

€24,500

Call

Condition: excellent (used), Year of construction: 1996, Kunzmann WF4/3 tool milling machine with Heidenhain TNC 124 control Super CONDITION CE-compliant !!! Technical data: >> Year of construction 1996 Machine-No.340520 >> Rigid angle table (newly planed) >> Speed: infinitely variable up to 2550 rpm >> Feed stepless in 3 axes from 0 to 1000 mm/min >> Traverse paths X/Y/Z: 400/320/400 mm >> Rapid traverse rates x/y/z: 4 / 4 / 3 m/min >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1600 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 10 KVA Dmkw0n Accessories and equipment: >> Heidenhain TNC 124 control >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control unit and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 To the machine : On offer is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used a little for training. A very easy to operate control. Furthermore, the machine has vertical and horizontal hydraulic clamping. The conversion from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Kunzmann on site under power.

more

Listing

Leipzig

7,966 km

Deckel FP 4A

Call

Condition: used, x-travel: 560 mm y-travel: 500 mm z-travel: 480 mm control: DIALOG 11 spindle taper ISO: SK 40 + SK40 spindle head swivable left - right: 90° ° quill travel: 80 mm Zt8itkre range of revolution per miute: Vertical Spindel 40 - 4000 / 18 step U/min spindle speed:: Horizontal Spindel: 1000 U/min feed:: X/Y+Z: 2 - 3600 mm/min rapid traverse : X/Y+Z: 4000 mm/min Table dimensions: 980 x 400 mm table load: 0,4 t total power requirement: 16,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m dimensions electric cabinet: 0,8 x 1,9 x 1,1 m X-axis table=560mm Y-axis=spindle head approx. 500mm Z-axis=table 480mm The milling beam can be moved 500mm. Operation with Grundig elektronic with swiveling boom incl. two manual control units incl. enclosure of the working area incl. machine vice (400mm jaw width) coolant tank with pump

more

Listing

Weiterstadt

7,845 km

br. universal milling machine

DECKEL FP 4 A Contur 2

Call

Condition: used, Year of construction: 1986, Cover milling machine FP 4 A Contur 2 x-way 485 mm y-way 385 mm z-way 380 mm spindle support SK 40 Spindle speeds 0 - 3150 rpm Table size 800 x 460 mm Table load 170 kg Drive power 4,4 kW Feed rate 10 - 2000 mm/min CNC control CONTOUR 2 quill stroke 80 mm Coolant device Operating voltage 380 V Total power consumption 12 kVA Machine weight approx. 2,0 t Space requirement approx. E2lww7e 2,00 x 2,40 x 1,90 m Electrical cabinet 0,85 x 0,75 x 1,15 m Control system CNC

more

Listing

Günzburg

8,038 km

WAGNER FCA 400

Call

Condition: excellent (used), Year of construction: 2009, x-way 400 mm y-way 300 mm z-way 355 mm number of grooves 5 Jep8vewqrz table clamping area 750 x 320 mm quill stroke 80 mm spindle motor 2,2 kW machine weight approx. 1200 kg

more

Listing

Offenburg

7,893 km

Universal milling machine NC/CNC

DECKEL FP3NC

€9,500

Call

Condition: good (used), Year of construction: 1986, Milling machine Deckel FP3NC Manufacturer: Deckel Type: FP3NC Year of manufacture: 1986 Control: Dialog 4 Condition: used Bfbzv7seb8w travels: X 400 / Y 400 / Z 400 mm quill stroke: 80 mm Speed: 40 rpm. Up to 3600 rpm. Swiveling milling head. Hydraulic tool holder vertical/horizontal SK40. Electronic handwheel. Control bar. For tool change and program start. Documentation. Lamp. Coolant system. Full cabin. NC T400 rotary table Weight: approx. 2000 Kg. Control cabinet weight: 300 Kg.

more

Listing

Villingen-Schwenningen

7,958 km

Milling Machine

Schmoll A-MX1-80S-DH-M6-CCD

€25,000

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2013, Main: Speed Range: 60.000/80.000, Spindle Type: SM60 / MCT 80 The price stated is plus 20% Buyers premium and 19% VAT (for National Buyers) or 19% Export Deposit (for International Buyers) Dismantling and loading onto truck from the site/location is carried out by a specialist dismantling company for an additional charge Further information on request Beysqul2enm

more

Listing

Ubstadt-Weiher

7,892 km

Deckel Maho DMU 50T

€24,500

Call

Condition: excellent (used), Universal milling machine cover Maho DMU 50T with Siemens 810 D ShopMill very good condition !!! Technical data: >> Year of manufacture ca.2002 >> Siemens 810 D ShopMill >> Travels X500/Y400/Z400 >> C and B axis manual with display Bfkagrp7ijp >> Working spindle: Max. Torque 88 Nm Max. Spindle speed 20 - 9.000 rpm Tool holder SK40 >> Feed rate X, Y, Z -10.000 mm/min rapid traverse X, Y, Z 12 m/min >> Tool magazine: number of tools 16 >> table Ø700x500mm >> Swivel range +95° /-10 >> Required air pressure 6 bar >> Dimensions and weight: Dimensions 2.200 x 4.000 x 2.450 mm Weight approx. 3.500 kg >> Coolant system >> Electric handwheel >> Power supply 400V kVA 17 To the machine : Offered is a universal milling machine Deckel Maho DMU 50T with a control of Siemens 810 D ShopMill in a very good condition. The table is manually adjustable (digital) by two other axes B and C. A very easy to use control, it can enter and approach positions, deep drilling, tapping, hole patterns, hole circles, hole lines and rectangular pocket milling. Programs can be entered and read out through an interface. Take the opportunity to inspect and try out the machine on site under power.

more

Listing

Leipzig

7,966 km

Deckel FP 4A MA

Call

Condition: used, Year of construction: 1985, x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 2 1/2 D- Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: 10 - 1000 mm/min revolution per minute: horizontal: bis 1.000 U/min rapid traverse : X/Y/Z: 2000 mm/min Fcmvamedc Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m dimensions electric cabinet: m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit

more

Listing

Maulbronn

7,917 km

Deckel

DECKEL FP3NC

€6,900

Call

Condition: reconditioned (used), Year of construction: 1991, Dialog 11 control travel XYZ -axis 400mm max. spindle speed max. 5000rpm infinitely variable tool holder SK40 with hydraulic tool clamping weight 1,9t Bd2kjyiyoa2 Electronic handwheel Coolant device Machine light Manuals Machine is in good condition and can be tested on site. Sale ex location Without warranty and guarantee. Price net plus VAT.

more

Listing

Blumberg

7,972 km

Hermle UWF 600

Call

Condition: like new (used), Year of construction: 1989, Hermle UWF 600 , year 1989 , Siemens 810 T , with 3 D button Data : Ci73tvv9 x-way 400 mm y-way 330 mm z-way 350 mm total power requirement 6,3 kW machine weight 2000 kg condition : as new, because training machine

more

Listing

Ahaus

7,617 km

MACMOM / INAS M 343 B CNC

Call

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90,0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11,0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate Ba3t0yurb7o - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E

more

Listing

Villingen-Schwenningen

7,958 km

Milling Machine

Schmoll A-MX1-60S-DH-CCD

€20,000

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2010, Main: Speed Range: 60.000/80.000, Spindle Type: SM60 / MCT 80 B0bch7fp The price stated is plus 20% Buyers premium and 19% VAT (for National Buyers) or 19% Export Deposit (for International Buyers) Dismantling and loading onto truck from the site/location is carried out by a specialist dismantling company for an additional charge Further information on request

more

Listing

Jonschwil

8,031 km

CNC Milling Machine

Deckel Maho MH 400 T

Call

Condition: good (used), Year of construction: 1987, Travel X/Y/Z 400/250/375 mm, 18 speed 80 - 4000 U/min, motor 2,2 KW, spindle SK 40, control MAHO CNC 232, table size 700x270 mm, hydraulic tool clamping, coolant device, spash guard, 20 tool holders with tools, tool setter, machine vice GOODJ 125 N, clamping set, machine feet, several tools, manual Tb9af

more

Listing

Dürnten

8,028 km

Mikron WF 3 DCM

€6,300

Call

Condition: used, Year of construction: 1985, In very good condition Details: Cywjvdymak x-way: 500 mm y-way: 500 mm z-way: 350 mm table surface: 800 x 450 mm spindle mounting: ISO40 Speed range: max. 3150 rpm Power supply voltage: 380 V / 50 Hz Drive power: 4 kW Machine weight: approx.1,7 t Space requirement: approx. 2.5 x 2.3 x 2.0 m Control HEIDENHAIN TNC 155 Remarks: - The price does NOT include accessories such as tool holders, etc.! - Collection by buyer, ex place: RUNOX AG, Bubikonerstrasse 39, 8635 Dürnten, Switzerland (near Zurich) - Pick-up date will be fixed by the seller in consultation. - No guarantee - Advance payment (invoice)

more

Listing

Niederlangen

7,585 km

CNC Universal Tool Milling Machine

KLOPP-KORRADI FWUE 8/ TNC 124

Call

Condition: used, Year of construction: 2007, x-travel 480/500 mm y-travel 230/250 mm z-travel 380/400 mm speeds 45 - 2240 U/min table surface area 1000 x 250 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 3 kW Feddpbbkll weight of the machine ca. 1550 kg dimensions of the machine ca. 2600 x 2200 x 1800 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual

more

Listing

Staufenberg

7,810 km

STANKO SMK 25/32 mit HEIDENHAIN TNC 135

€5,000

Call

Condition: defective spare-parts repository (used), Year of construction: 1992, CNC universal tool milling machine make STANKO type SMK 25/32 Year of manufacture 1992 Technical data: Bawlfmtnrkz traverse path X 510 mm traverse path Y 410 mm travel Z 400 mm spindle mounting DIN 69871 ISA 40 table surface 800 x 400 mm piece weight 400 kg infinitely variable speeds 20 - 2000 rpm. quill stroke 80 mm feed range 1 - 3000 mm/min rapid traverse 5 m/min drive power 11 kW outside dimensions 2600 x 2150 x 2130 mm weight approx. 2000 kg with - HEIDENHAIN TNC 135 point control system - chip collecting tray used, as spare part carrier

more

Listing

Ubstadt-Weiher

7,892 km

Kunzmann WF4/3

€37,500

Call

Condition: excellent (used), Year of construction: 2009, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 124 control Year 2009 Super CONDITION CE-Conform !!! Technical data: Gou2xqtb7 >> Year of construction 2009 >> Rigid angular table >> Speed: stepless up to 4000 rpm >> Feed stepless in 3 axes from 0 to 2000 mm/min >> Travels X/Y/Z: 400/350/400 mm >> rapid traverses x/y/z: 5 / 5 / 4 m/min >> table area: 650 x 350 mm >> table load: 250 kg >> quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1700 Kg >> Space requirement approx: 2,3 x 2 x 2 m >> Drive power: 12 KVA Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation , spare parts diagrams, operating instructions of the control and programming examples >> Handwheels >> Coolant system About the machine : Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 124 control. This universal milling machine is in a very good original condition. It comes from a company where it was used only little for training. A very easy to use control. Furthermore, the machine has vertical and horizontal hydraulic clamping. The conversion from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Kunzmann on site under power.

more

Listing

Reiden

7,976 km

Emco FB-4

Call

Condition: excellent (used), Year of construction: 2001, Digital display Heidenhain. Slide travel range Slide travel longitudinal (X) 450 mm Carriage travel transverse (Y) 300 mm Slide travel vertical (Z) 350 mm Dklz82 clamping surfaces 800 x 400 mm Tool holder SK 40 quill stroke 100 mm Swiveling vertical milling head ± 90 Speed range 50-2500 rpm Machine dimensions: Length 1485 mm width 1475 mm height 1475 mm Weight approx. 1500 kg

more

Auction

DECKEL FP3A

Condition: ready for operation (used), machine/vehicle number: 2206-0375, Functionality: fully functional, TECHNICAL DETAILS Working range X (longitudinal): 490/500 mm working range Y (crosswise): 290/300 mm Working range Z (vertical): 390/400 mm Speed: 31,5 - 3150 rpm (right & left rotation) tool holder: SK40 Milling spindle stroke (hand) horizontal: 80 mm Milling spindle stroke (hand) vertical: 80 mm feed speed: 5 - 1250 mm/min rapid traverse for x,y and z axis: 2500 mm/min Handwheel rotation X, Y and Z: 2.5 mm/rev. number of clamping slots: 4 distance of clamping grooves: 63 (14H7) permissible load: 650 kg measuring step: 0.001 mm input clearance: 0.005 mm G28jgil9rb MACHINE DETAILS electrical connection: 380V 50 Hz electrical power consumption: approx. 2,0 / 4,0 kW connected load: approx. 22 kW EQUIPMENT switch operated tool clamp feed drive single DC motors and ball screws for each axis vertical milling head on spindle block (by means of chain drive) movable 150 mm Table slide Control system Key-programmable CNC2103 linear control with screen display Actual value transfer to the program Input and output on cassette or punched tape possible Program memory 16 kByte Drilling and milling cycles 24 tool offsets

more

Listing

Walenstadt

8,070 km

Mikron WF 41 C

€6,500

Call

Condition: used, Year of construction: 1990, Details: x-way: 630 mm y-way: 500 mm z-way: 460 mm table surface: 1000 x 500 mm spindle mounting: ISO40 Speed range: 31.5 - 3150 rpm Control: CNC, Heidenhein TNC 355 Total power requirement: 13.5 kW Machine weight: approx. 3.1 t Space requirement: approx. 3 x 2.5 x 2.2 m Control HEIDENHAIN TNC 355 Remarks: - The price does NOT include accessories such as tool holders, etc.! - Collection by buyer, ex place: ECOTEC AG, CH-8892 Berschis, Unterdorfstrasse 33 - Pick-up date will be fixed by the seller in consultation. - No guarantee - Advance payment (invoice) Dlzwjn

more

Listing

Niederlangen

7,585 km

HERMLE UWF 700

Call

Condition: used, Year of construction: 1984, x-travel 410 mm y-travel 310 mm z-travel 400 mm tool taper ISO 40 Pa0ar spindle turning speed range 40 - 2000 U/min table-size 700 x 280 mm surface area 830 x 224 mm total power requirement 2,2 kW dimensions of the machine ca. 1,4 x 2,1 x 2,0 m Control Heidenhain TNC 145

more

Listing

Staufenberg

7,810 km

MAHO MH 400 P mit HEIDENHAIN TNC 135

€3,100

Call

Condition: repair required (used), Year of construction: 1983, Universal milling machine make MAHO type MH 400 P make # 41837 year of construction 1983 technical data: vertical clamping surface 800 x 200 mm working range longitudinal X 400 mm working range vertical Y 375 mm working range transverse Z 250 mm tool holder ISO 40 Automatic tool clamping D3zux3dvnp quill stroke vertical 50 mm stepless speed adjustment horizontal and vertical 40-3150 rpm. feed range X and Y 5 - 750 mm/min feed range Z 5 - 500 mm/min rapid traverse X and Y 1,2 m/min rapid traverse Z 0,8 m/min Main drive 2,2 kW outer dimensions approx. 1000 x 1300 x 1750 mm weight approx. 850 kg with - point and line control HEIDENHAIN TNC 135 - rigid angular table - horizontal milling device used, defective as spare part carrier

more

Listing

Lüdenscheid

7,707 km

milling machine CNC

MACMON M 434 NC/CNC

€23,900

Call

Condition: excellent (used), Year of construction: 1999, - control: Heidenhain TNC 310 - table size: 320 x 250 mm - travel range: X= 400, Y= 250, Z= 400 mm - tool holder: ISO 40 dimensions LxWxH: 1600 x 1500 x 1900 mm Bjjumyoc weight: ca. 1200 kg

more

Listing

Iserlohn

7,695 km

MAHO MH 500 W

€4,800

CNC Universal Milling Machine

Call

Condition: good (used), Year of construction: 1988, CNC milling machine MAHO Type: MH 500 W Year 1988 Heidenhain TNC 232 B control. With counter bearing for horizontal milling. Spindle mounting: ISO 40 spindle speed stepless 20 - 4000 rpm feeds : 1-3000 mm / min Travels : X 500 mm Y380 mm Z 350mm Table : 700 mm X 350 mm Weight.ca.2000kg. Dybsudqqg Machine documentation available Machine is ready for demonstration.

more

Listing

Engelskirchen

7,705 km

MAHO MH 500 W4

Call

Condition: good (used), Year of construction: 1990, X - axis 500 mm Y - axis 380 mm Z - axis 350 mm spindle taper 40 SK spindle speed range 20 - 4000 U/min quill stroke 50 mm feed range 1 - 3000 mm/min rapid travel 5 m/min table surface 800 x 500 mm Ckhjtrpjj7 max. table load 250 kg KG total power requirement 11 kW machine weight ca. 1,9 t CNC PHILIPS 432 Vertical milling head, swiveling manual quill stroke rigid table Handwheel for each axis Cooling

more

Listing

Dreieich

7,842 km

Tool Room Milling Machine - Universal

DECKEL FP 4A - CONTOUR 2

Call

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm spindle taper SK 40 spindle turning speed range 0 - 3150 U/min table-size 800 x 460 mm feed 10 - 2000 mm/min power capacity 4,4 kW CNC-control Contour 2 quill stroke 80 mm voltage 380 V total power requirement 12 kVA weight of the machine ca. 2,0 t dimensions of the machine ca. 2,00 x 2,25 x 2,00 m electric cabinet 0,75 x 0,85 x 1,15 m Lhxoczvb - Serial-No.: 2204-0678 - control: CONTOUR 2 - horiz. milling spindle - hydr. tool clamping - coolant equipment

more

Listing

Ubstadt-Weiher

7,892 km

Fehlmann Picomax 51 CNC

€19,500

Call

Condition: excellent (used), Year of construction: 1995, High precision drilling and milling machine Fehlmann Model Picomax 51 CNC Heidenhain TNC 360 very good condition CE Compliant Technical data: >> Year of manufacture: 1995 >> travel X/Y/Z 420/ 240/ 120 mm >> Travel W 450 mm >> Clamping surface (L x W) 730 x 280 mm >> Permissible table load 75 kg >> Distance table - spindle nose 0 - 560 mm >> Feed speed X/Y 1 - 7200 mm/min >> Feed speed Z 1 - 3600 mm/min >> Tool - quick change system SF 32 >> speed range infinitely variable 9200 rpm >> drive power 4 kW >> Space requirement approx.(W x D x H) 2.0 x 1.5 x 2.4 m >> Fourth axes dividing head Hthrgw39x To the machine : Offered is a high precision drilling and milling machine Fehlmann model Picomax 51 CNC in a very good condition with CE conform. It has a Heidenhain TNC 360 contouring control. Especially easy is the program creation in the user friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented contouring controls that allow you to program conventional milling and drilling operations directly on the machine in easy-to-understand plain language dialog. The tool holders (see pictures) are included. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

more

Listing

Staufenberg

7,810 km

CNC tool milling machine

DECKEL FP 3 NC mit Dialog 4

Call

Condition: used, Year of construction: 1982, CNC tool milling machine make DECKEL type FP 3 NC make # 2803-0200, year of manufacture 1982 Technical data: 9oun9tad8n Travel X 400 mm traverse path Y 315 mm travel Z 400 mm Clamping surface of the fixed angular table 460 x 700 mm feed speed stepl. adjustable 4 - 2000 mm/min rapid traverse for X,Y and Z 4 m/min spindle mounting SK 40 21 programmable speeds 31,5 - 3150 rpm spindle drive 2 / 3 kW electrical connection 380 V, approx. 14 kVA weight 1800 kg external dimensions L x W x H 1950 x 1700 x 1970 mm control cabinet 800 x 800 x 1400 mm with - CNC control Dialog 4 - swiveling milling head - rigid table used SPECIAL PRICE ex stock as available - because monitor is missing

more

Listing

Metzingen

7,973 km

HERMLE UWF 600 CNC

Call

Condition: used, Year of construction: 1990, x-travel 400 mm Vv7znq y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW weight of the machine ca. 2 t dimensions of the machine ca. 736 m

more

Listing

weiterstadt

7,845 km

DECKEL FP 2A

Call

Condition: excellent (used), Year of construction: 1994, Cover milling machine FP 2A with control Dialog 12 + vice Bhxmcogo7d

more

Listing

Pfungstadt

7,851 km

universal Tool Room Milling Machine

Deckel FP 4 A

Call

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 2204-0585, Item number MA1143 Manufacturer cover Type FP 4 A Year of manufacture 1985 Machine no. 2204-0585 Control Contur 2 length [mm] 2400 width [mm] 2000 height [mm] 2000 Weight [kg] 2000 Connected load 380 V / /,5KW stroke [mm] spindle sleeve stroke 80mm Qoehx infeed speed [mm/s] 10-1000 mm / min Travel range X/Y/Z [mm] 485 / 385 / 380 Gear [rpm] 50-2500 table size [LxW] 450 / 800 Equipment Screen was renewed / Various tool holders / Operating instructions

more

Listing

Heilbronn

7,927 km

Macmon M-434 NC

Call

Condition: good (used), Year of construction: 2008, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Behgxl Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

more

Listing

Stuttgart

7,953 km

Emcomat FB-450 storage machine

EMCO EMCOMAT FB-450 MC Siemens 828D

Call

Condition: as good as new (ex-display), Year of construction: 2022, Immediately available stock machine from our showroom Stuttgart. ( subject to prior sale) Contact us for an offer. EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. We will be happy to make you an offer. Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Wjikqkkj Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

more

Listing

Staufenberg

7,810 km

CNC tool milling machine

DECKEL FP 3 NC mit Heidenhain TNC 355

Call

Condition: used, Year of construction: 1990, CNC tool milling machine make DECKEL type FP 3 NC Machine # 2837/0352 Year of manufacture 1990 Technical data: Travel X 400 mm traverse path Y 400 mm travel Z 400 mm Spindle speeds 31.5 - 5000 rpm. 9ouneywjwe spindle support ISA 40 quill stroke 80 mm feed speed 2 - 4000 mm/min. single cut 0,01 mm perm. table load 650 kg connected load 22 kW weight approx. 1785 kg outer dimensions approx. W x D x H 2800 x 2500 x 2000 mm with - CNC control Heidenhain TNC 355 - electronic handwheel - rigid table - universal table used, in good condition

more

Listing

Root

8,011 km

NC milling machine

MIKRON WF 2/3 DPM

Call

Condition: good (used), Parts shown by hand not come. Dd07fnbbb Technical details shown on pictures.

more

Listing

Weiterstadt

7,845 km

CNC universal milling machine

HERMLE UWF 700

Call

Condition: used, Year of construction: 1983, Hermle UWF 700 Brief description: Universal tool milling machine Rxikx Universal tool milling machine Hermle Type UWF 700 year of manufacture 1982 table 700 x 285 mm travel X / Y Z 400 / 290 / 380 mm mounting SK 40 spindle speed 40 - 2000 rpm quill stroke 63 mm drive power 2,2 kw Digital display counterholder weight 1500 kg

more

Listing

MIKRON WF 2 / 3 DP mit HEIDENHAIN TNC 121

Staufenberg

(dealership location)

7,810 km

MIKRON WF 2 / 3 DP mit HEIDENHAIN TNC 121

Call

Condition: used, Year of construction: 1981, CNC universal milling machine make MIKRON type WF 2 / 3 DP with positioning and linear control HEIDENHAIN TNC 121 9l89diqeh year of manufacture 1981 Technical data: longitudinal travel X 400 mm Cross travel Y 400 mm vertical travel Z 575 mm Spindle mounting ISA 40 24 Spindle speeds 30 - 2240 rpm. feeds infinitely variable in all directions 1 - 750 mm/min. Rapid traverse in all directions 1500 mm/min. drive power 6 kW with - autom. tool clamping - quill stroke - swivelling vertical milling head - rigid angular table 450 x 800 mm - HEIDENHAIN TNC 121 contouring control - operating mode manual, can be operated conventionally with digital display - cooling device used, in good condition

more

Listing

Root

8,011 km

CNC milling machine with tool changer

DECKEL FP 3 ATC

€4,000

Call

Condition: not inspected (used), Please see technical details on photo. Ur8byxxv

more

Listing

AUERBACH FUW 400 HEIDENHAIN CNC- TNC 360

Staufenberg

7,810 km

CNC tool milling machine

AUERBACH FUW 400 HEIDENHAIN CNC- TNC 360

Call

Condition: defective spare-parts repository (used), Year of construction: 1992, CNC tool milling machine make AUERBACH type FUW 400 Machine. # 336 Year of construction 1992 Commissioning 1996 Technical data: table longitudinal travel X 500 mm headstock cross travel Y 400 mm table vertical travel Z 330 mm table clamping surface 710 x 400 mm spindle vertical travel 100 mm Spindle mounting ISA 40 Cj00n9c0kq 2 speed ranges stepless 50-3000 rpm. feeds longitudinal = X stepless 1 - 1250 mm/min feeds cross = Y stepless 1 - 1250 mm/min feeds vertical = Z stepless 1 - 1250 mm/min Rapid traverse longitudinal and transverse 3150 mm/min rapid traverse vertical 1600 mm/min drive power 6,0 kW outside dimensions 2900 x 2370 x 2350 m weight approx. 2400 kg with - HEIDENHAIN CNC control TNC 360 dialog control (defective) - automat. tool clamping - rigid angle table - partial cabin used, as spare part carrier

more

Listing

Staufenberg

7,810 km