Condition: good (used), Interface, data acquisition device, test device, telemetry system, probe interface, laser measuring system -Manufacturer: Renishaw, laser measuring system from measuring machine Stiefelmayer C 100 413514 Fodpfjw S E E Iex Ahdjpn -Type: RGH22 D07S06 -Dimensions: 130/90/H45 mm -Weight: 0.2 kg

Condition: used, Suitable for measuring all types of milling and drilling tools, profiles, punching tools, drive and cardan shafts, profile rollers, etc. Accessories: Measuring table adjustment with digital display Screen diameter: 500 mm Enlargement: 50 and 100 times Swivel range of the upper table: +/- 2 mm Connected load approx.: 230 V / 50 Hz Fpsdewnnwgspfx Ahdon Dimensions W x D x H approx.: 1200 x 700 x 1800 mm Weight approx.: 400 kg colour: Light grey

Condition: good (used), Measuring microscope, universal workshop measuring microscope, microscope -Manufacturer: Leitz Wetzlar, universal workshop measuring microscope -Reading accuracy: see photos Fsdpfx Ash Tadpehdspn -Dimension assembled: 255/245/H470 mm -Quantity: 1 pieces available -Price per piece -Dimensions transport box: 710/230/H155 mm -Total weight: 35.4 kg/pc.

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm Fpsdoicnk Ejpfx Ahden The device is not functional! Chassis for sale.

Condition: used, Measurement data acquisition device, test device, telemetry system, Can-Bus monitoring Fpedpfxefg E E Ne Ahdon -Gemac: CANobserver .: 22550-00 -Number: 1 pieces -Dimensions: 115/50/H125 mm -Weight: 0.5 kg

Condition: used, Balance, calibration weight, test weight, calibration weight, taring weight -Calibration weight: test weight calibration weight for scales -Test weight: 1 kg -Dimensions cover: Ø 60 x 94 mm Fpodpfjl Ab Egox Ahden -Weight: 1.0 kg

Condition: good (used), Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement, roughness probe -Manufacturer: Hommel, measuring probe for roughness measuring device -Measuring probe: Type P2FE 30 / P2F E 100 -Individual components: see photos -Box dimensions: 235/105/H30 mm Fedpfx Ask Hdr Tohdspn -Weight: 0.4 kg

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement Fpedpfsldk Ikex Ahdsn -Manufacturer: EH Endress + Hauser, conductivity transmitter -Type: conducta XR 2 -Measurement range: 0 to 200 mS -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Condition: used, tester, torque wrench, torque tool, torque wrench tester, torque wrench tester -Manufacturer: Norbar, Digital torque tester with case -Type: TruCheck 2 Plus -Part No.: 43521 -Measuring range: 3 - 65 Nm Fedpfx Asr H Nlzohdepn -Mounting: 3/8" -Accessories: see photos -Dimensions: 205/60/H110mm -Weight: 3.8 kg

Year of construction: 2025, condition: as good as new (ex-display), Single-column table-top machine max. testing force 2.5 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 2,5 kN (grade 05 from 25 - 2500 N / grade 1 from 5 - 25 N - Warranty 24 months - Software LabTest - unsurpassed flexibility, complete software - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - compression plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature / hot draft furnaces Fpjdpfxjcw Ix So Ahdsn ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Year of construction: 2025, condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes • automatic cooling cycle • no compressed air required • 12 month warranty Fodpfxscwamxs Ahdopn Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Year of construction: 2025, condition: new, Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support Fpsdpjdb Nfpjfx Ahden - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Photos shows machine with optional equipment!

Year of construction: 2010, condition: used, Shear beam load cell -Nominal load: 500 kg -Nominal value tolerance: %+/- 0.1 -Stainless steel: 1.4548 -Protection class: IP 68 -calibratable -Dimensions: 32/32/130 mm -Net weight: 0.98 kg Fsdedkpa Sspfx Ahdopn

Year of construction: 1990, condition: used, Universal hardness testing machine Fedjptcyjpfx Ahdepn High-quality general overhaul with warranty Optional modernization for Vickers, Brinell, and Rockwell testing with PC connection

Condition: used, functionality: fully functional, Geosig Accelerometer with recorder GeoSIG GMS plus Recorder model no GMSplus-IP67 Fpodoq S Uz Uspfx Ahden Geosig Accelerometer/sensor Model AC73 Type HHV Vibration sensor and Recorder including accessories as shown in the photos. This Vibration sensor and Recorder is used. We have a stock of approximately 100 used sensors and 100 used recorders available.

Condition: good (used), Type: TS -70/1000-10 Fjdpfx Aoziizyjhdjpn For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: Fpjdpfxozii Ake Ahdon - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Fedpfxezii Awo Ahdjpn Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Fjdpfxozii A Ro Ahdspn Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Fodpfxszii Dhs Ahdjpn Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Weight: approx. 100 kg Control HK PC102 control unit LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale. Fsdpfx Ahszhadcsdspn

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Fedpfxezx Uwxo Ahdspn Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 4 kg, input voltage: 230 V, Equipment: documentation/manual, type plate available, For sale is a ZEISS GOM Scan 1 MV400, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Fpjdpfx Ahozypzujdon Ideal for precise 3D measurements in industry and research. Fast setup, easy operation. Condition: Like new, little used, primarily used for trade shows, exhibitions, and training. Scope of delivery: ZEISS GOM Scan 1 MV400 Original accessories according to standard configuration Power supplies and cables 10 m cable Transport case available Tripod and PC are not included in the offer and will not be provided, but can be offered separately upon request. ZEISS INSPECT OPTICAL 3D Free Open and edit new and existing projects Import of point clouds, polygon meshes Creation, editing, and processing of polygon meshes Element construction: regular geometries, points, sections, curves, surfaces, dimensions CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY Application of common alignment methods Comparison against CAD with colored deviation display Dimensional and form/position evaluations according to ISO GPS and ASME Y14.5 Report module Note: The device has only been used for demonstration, training, and presentation purposes. A new 3D acceptance certificate will be provided upon purchase. Furthermore, we would offer to take in used optical GOM or Zeiss systems in part exchange upon purchase of the Zeiss GOM Scan 1 MV400.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: H513201129, type of input current: AC, input voltage: 220 V, measuring range X-axis: 750 mm, measuring range Y-axis: 50 mm, measuring range Z-axis: 250 mm, Selling a high-quality and fully functional Sony Magnescale 3-axis digital measuring system for machine tools, milling machines, special machines, or measurement tasks. The system comes from an industrial application and is in used, good condition. All components are functional, and the display works perfectly. Scope of delivery: Sony LH51-3 digital display (3 axes) Sony SR128-025 linear scale – measuring length 250 mm Sony SR128-045 linear scale – measuring length 450 mm Sony SR128-075 linear scale – measuring length 750 mm Sony TS-1 3D touch probe Extension cable Connection cable as shown in the photos Operating manual (digital as a PDF file) Technical data: 3-axis digital display Sony LH51-3 Measuring system: Sony Magnescale Axis X: SR128-075 – measuring length 750 mm Axis Y: SR128-045 – measuring length 450 mm Axis Z: SR128-025 – measuring length 250 mm Resolution up to 0.001 mm (adjustable depending on the device) Absolute and incremental mode Radius/diameter display Reference and zero point functions Industrial design for machine tools Fpjdpfx Ahszmxk Seden Note: Only the items shown in the photos are included in the sale. Please refer to the photos. Inspection and functional testing are possible by arrangement. A functional video can be sent before shipping. Private sale, excluding any warranty, guarantee, or right of return. Keywords: Sony Magnescale, Sony LH51, LH51-3, Sony SR128, Sony TS-1, digital display, DRO, digital readout, displacement measuring system, linear scale, linear encoder, position display, milling machine, lathe, machine tool, CNC, machine retrofit, Heidenhain, Acu-Rite, Accurite, Fagor, Newall, Mitutoyo, RSF Elektronik, Renishaw, Renishaw encoder, Renishaw linear scale, Renishaw measuring probe, Sino, Easson, Anilam, machine DRO, scale for milling machine, digital display for milling machine, drilling machine.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, warranty duration: 3 months, Equipment: documentation/manual, Complete Package Including: 1 Zoom 90 R 5'' Robotic Total Station with WinCE AiM360, TRack360, and Scout360, 5", accXXess10 EDM 1000M, 1 Long-range Bluetooth handle 500m, 1 Manual in French or English, 2 Li-Ion 4.4Ah batteries, 1 Li-Ion battery charger, 1 Lead-free optical plummet, 1 Industrial-grade SD card, 1GB, 1 Notebook holder, 1 360° prism, 1 Touchscreen tablet, 1 X-Pad topographic software included. Calibration certificate. Fpodpfxjzq Hu He Ahden Suitable for Civil Engineering, Surveyors, Topographers, and Construction. The Zoom90 robotic total station is an ultimate single-operator system, offering up to 20% more automated performance, extended non-prism measurement capabilities up to 1000m, STReAM360, accXess technologies, and open Windows CE connectivity. OPEN CONNECTIVITY Connect your preferred software and data logger to perform remote control tasks without reducing productivity. The Zoom90 uses the Windows CE operating system, which allows the execution of many powerful field software programs. Full VGA color touchscreen, guaranteeing optimal performance and graphic capabilities. TOPOGRAPHY ADVICE Alternative solutions in terms of measurement and software. #Topography #TotalStation #Leica #LeicaGeosystems #TopographicEquipment #UsedTopography #Surveyor #Geomatics #3DScanner #GPS #Theodolite #Monitoring #CivilWorks #ConstructionSite #LaserScanner #Mapping