Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for fast measurements in the field, during production, or for quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Härteprüfgerät • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power supply • Clear analog measurement scale ⸻ Set includes: • Hardness tester • Carrying case • User manual in German • Set of adapters and bushings (visible in the set) Condition: Like new / warehouse stored Equipment unused or tested only a few times – no signs of wear. Itodpfx Afevbwzio Sjr

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Iodpox Exmtsfx Af Sotr Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: U26017LR1597, measuring range X-axis: 1,500 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 700 mm, Equipment: documentation/manual, type plate available, 1.2 * Info: Used 3D coordinate measuring machine in very good condition from our own GROB quality assurance. Recorded annual maintenance carried out by HEXAGON New TÜV (02/2025) Travel paths: X-axis = 1,500 Y-axis = 900 Z-axis = 700 Description: - Leitz Reference HP 15.9.7 - Leitz control panel with potentiometer - Leitz control panel stand - Passive damping system - Leitz measuring head LSP-S2 Scan+ Itjdpfxev Ha Ats Af Ser - Probe changing device HR-XS-900, S2, X5 - 9x probe holder HR-XP-P - Calibration ball - Technical device documentation

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, input voltage: 220 V, year of last overhaul: 2018, Equipment: type plate available, CNC 3D Measuring Machine Model: WENZEL 6 10 5 CNC + MIH + TP20 + styli ● Year: 2002 ● Measuring range: 600 x 1000 x 500 mm ● Full CNC control ● High-stability granite structure ● Air bearing guides ● Precise, rigid, and reliable machine Equipment included: ● Renishaw MIH manually indexable head Itsdpox Ebx Aefx Af Ssr ● Renishaw TP20 probe with modules ● Set of Renishaw styli ● CNC control unit ● Complete electrical cabinet ● PC + measuring software (if present → to be confirmed) ● Clamping plate / accessories ● Documentation Condition: ● Very clean, well-maintained machine ● Last calibration: 2018 ● Machine under power → demonstration possible ● Smooth axis movement, no abnormal play Transport: ● Dismantling and transport at buyer's expense

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum circuit breaker: 16A Frequency: 50/60Hz Electrical connected load: 3.4kW Temperature range: +5°C above ambient temperature up to 300°C Spatial temperature deviation at 150°C: ± 3.8K Temporal temperature deviation at 150°C: ± 0.7K Heating-up time to 150°C: 29min Recovery time after 30 s door opening at 150°C: 6min Air exchange rate at 150°C: 18x/h Interior volume: 400l Itedpfx Afexzulne Sjr Maximum load per shelf: 35kg Maximum total load: 90kg Energy consumption at 150°C: 1,200Wh/h Maximum number of shelves: 10 External dimensions: Width: 1,235mm Height: 1,025mm Depth: 765mm Internal dimensions: Width: 1,000mm Height: 800mm Depth: 510mm

Condition: like new (used), inclusive extensive Equipment > Enumeration follows Iodpfx Ajkw T H Asf Sstr

Condition: reconditioned (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 Multisensor Measuring System equipped with camera, laser, Renishaw probing system, and Hexagon Vision 3D software (upgrade to Windows 11 and OptiCheck3D 2025 possible) Complete maintenance history available Itsdsxufk Ujpfx Af Sjr Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Delivery via factory service or forwarding agent, worldwide. Online or optional on-site demonstrations with customer parts, application-specific consultation by accredited Profitech metrology laboratories during project planning. Comprehensive service: – Delivery, installation, commissioning, accuracy verification to standard, certification, and extensive acceptance documentation. Individual training and education programs also available as online courses. Rental, hire-purchase, or financing available directly through Profitech without a financial institution. Measuring system can be individually configured to customer requirements. Measuring range for all sensors: 400x400x200 mm Dimensions: 800x1000x2000 mm Weight: approx. 800 kg Maximum load (glass plate): 30 kg Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) Max. traverse speed: 250 mm/s Including camera Including rotary table Including laser Including LED ring light Including new frame grabber Including dual-monitor operation Including CNC control and PC Including Hexagon Vision3D software

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 1193, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 2,549 kg, repeat accuracy: 0.003 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the item by 16/01/2026! TECHNICAL DETAILS Maximum permissible workpiece weight: 25,000 N Iodpfx Ajxy Rtrof Sjtr Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,000 mm Measuring resolution: 0.001 mm Straightness of guideways Straightness X-axis max.: 0.010 mm Straightness Y-axis max.: 0.010 mm Straightness Z-axis max.: 0.010 mm Repeatability: 0.003 mm Travel speed: stepless, 4.2 m/min MACHINE DETAILS Dimensions & weight Space requirement (L x W x H): 3,600 x 3,600 x 4,500 mm External dimensions (L x W x H): 2,590 x 2,280 x 4,080 mm Machine weight: 8.5 t

Condition: good (used), Year of construction: 2015, SPC measuring device / remeasurement station for measuring diameters and cylindrical form Measuring device, manual measuring station, testing device, test station Measuring computer QDS-Base, manufacturer KOMEG Manufacturer: Hafner Fertigungsmesstechnik Philipp Hafner GmbH & Co. KG Iedpswxb Sfefx Af Sstr 3 levels, each with 3 probes Measurement with pneumatic jet measuring mandrel in 3 levels, each level with one pair of nozzles Measuring computer QDS-Base, make KOMEG incl. measurement software, Profibus, interface, monitor, and keyboard Temperature compensation "Price / details on request". All technical data subject to typing errors or mistakes. We sell exclusively only to countries of the European Union.

Condition: used, functionality: fully functional, In this offer you buy a used display ‘Sharp PN-50TC1’ Object of sale: 1 x Sharp PN-50TC1 with the following equipment: incl. Intel Workstation Condition: This offer is for a used device which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. Ijdpfxovczv Hj Af Sotr For further information, you can of course also contact us personally.

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum pre-fuse: 16A Frequency: 50/60Hz Electrical connected load: 4.5kW Temperature range: +12°C above ambient temperature up to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heat-up time to 150 °C: 25 minutes Recovery time after 30 s door opening at 150 °C: 6 minutes Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per shelf: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Max. number of shelves: 16 Iodpfxoxzukko Af Sotr External dimensions: Width: 1,235 mm Height: 1,025 mm Depth: 765 mm Internal dimensions: Width: 1,000 mm Height: 800 mm Depth: 510 mm

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Itjdpfxoxxuyto Af Sor Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2019, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Measuring Machine Manufacturer: Mitutoyo Model: Mitutoyo Crysta-Apex S7106 Itjdpox E U N Rjfx Af Sjr Year of Manufacture: 2019 Measuring Ranges X-Axis: 700 mm Y-Axis: 1000 mm Z-Axis: 600 mm Control: UC-400 with temperature compensation Software: MCOSMOS-1 V5.4 Probe Holder: Measuring head Renishaw PH-10MQ Interface PHC10-3 PLUS Probe: Renishaw SP25M with SM module Change system: Renishaw ACR3 and two FCR25 Additional: Bilz vibration damping system

Condition: as good as new (ex-display), Year of construction: 2021, 7-axis Romer arm with 1,200,000 points per second laser RS6 head, Itodjipq Ivopfx Af Sjr 2.5m measuring range. Complete with remote control, pcdmis software. It is a fantastic machine with automatic weight balancing. High productivity and accuracy with excellent ability to scan on any surface. Software available upon request: included PCDMIS CAD++ with MESH option.

Condition: ready for operation (used), Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible. Isdpfxex El Ano Af Setr

Condition: refurbished (used), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 400 mm, warranty duration: 12 months, total height: 2,300 mm, type of input current: AC, total width: 1,120 mm, total length: 1,540 mm, overall weight: 1,350 kg, input voltage: 230 V, table load: 30 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-reconditioned Mahr Multiscope 664 (Including certified factory acceptance before delivery) Factory-reconditioned premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Online or optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: - Delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements! Multisensor measuring device equipped with camera system and Renishaw touch system. Measuring range of all sensors: 600x600x400mm (l x w x h) Itodpfsu Dw S Rjx Af Sor Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base frame) Max. load weight: glass plate 40kg Accuracy: U1=2.2 + L/150; U2=3.0 + L/125; U3=3.2 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s incl. camera with 2-stage zoom incl. laser incl. LED ring light incl. Renishaw TP200 touch probe system incl. frame grabber (Eagle) incl. Windows 10 incl. new Optichek 3D 5.0 ​​evaluation software Incl. Renishaw TP200 touch probe system The measuring device can be programmed for customer-specific parts during optional commissioning and calibration so that you are immediately able to run your measuring programs before any training that may be necessary.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0032703, Accessories: - Reference plate 63.3 HRC - Reference plate 58.5 HR30N - Test weights 150, 100, 60, 45, 30 kgf - Preload weight Itedpfex E U U Hox Af Ser - V-anvil - Spirit level - Diamond indenter - Steel ball indenter 1/8" - Steel replacement balls 1/8" - Dust cover - Operating manual The diamond indenter is slightly damaged below the tip (minor chipping – see photos).

Condition: good (used), Leco LECO C230 CARBON ANALYZER Carbon Determination C230 The LECO C230 Carbon Determiner is a microprocessor-based, software-controlled instrument for measuring the carbon and sulfur content in metals, ores, ceramics, and other inorganic materials. The C230 uses an induction furnace and measures carbon via infrared absorption. The infrared (IR) source consists of a nichrome wire heated by resistance up to 8,500 °C. The IR source emits visible energy as well as all wavelengths of the infrared spectrum. For description purposes, carbon dioxide can be used; the same principle applies for sulfur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. Energy from the IR source is absorbed as the gas passes through the cell, thereby preventing it from reaching the IR detector. One IR cell is used both as a reference and for measurement. The total carbon content in the form of carbon dioxide is captured continuously and simultaneously. The initial reference level or baseline for the detector is set by passing oxygen through the cell to remove any remaining atmospheric gases. Technical Data: Required Gases: Itodpfx Afsxxaxus Ssr Carrier gas: Oxygen, 99.5% pure, 40 psi Pneumatic gas: Compressed air, nitrogen, or argon, 40 psi (2.76 bar), source must be oil- and water-free Gas flow (based on nominal analysis time): Measurement: 3 liters per analysis Pneumatic: 1 liter per analysis Regulators: Oxygen: 501-291 O₂ pressure regulator Compressed air: 766-036 air pressure regulator Inert gas: 764-216 inert gas regulator Furnace: Induction, 18 MHz, 2.2 kW Data Transfer: Included Data Storage: Without PC: 10 sample weights, 50 results, 5 methods Without PC: Internal memory / Optional external display Without PC: LCD display (16 x 26 characters) Power Requirements: Determinator: 230 V~, ± 10%, 50/60 Hz, single phase, 15 amp max Operating current: 12 A Standby current: 4 A Condition: Used Scope of delivery: (See image) (Subject to change and errors in technical data; specifications subject to confirmation!) For further questions, please feel free to contact us by phone.

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. Ijdpfxox Ein So Af Setr (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Isdpexyungjfx Af Setr Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control.

Condition: good (used), functionality: fully functional, KEYENCE VL-350 Optical 3D Coordinate Measuring Machine TECHNICAL DATA & EQUIPMENT: Support table diameter: approx. 300 mm Iodpfxow Rfxle Af Sotr Including matching hardware REFERENCE NUMBER 182 DIMENSIONS & WEIGHT: 1000 x 900 x 800 mm 150 kg NOTES REGARDING COLLECTION: The item will be available from October 2025. A date for collection must be arranged on a specific day between 20.10.2025 and 31.10.2025 FCA: 59759 Arnsberg (DE), loaded onto truck

Year of construction: 2001, condition: used, Technical details: measuring range X-axis: 150-300 mm measuring range Y-axis: * mm Table dimensions: * mm measurement range Z =: 450 mm tool diameter: * mm tool taper: * SK compressed air: * bar dimensions: * m Itodpfx Afoxxl Sae Sjr machine weight ab.: * kg clamping surface upper angle: * Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer *

Condition: new, Year of construction: 2010, connected load frequency 230 V dimensions 1,6 x 0,8 x 1,55 mm Bubble wrap machine - Documentation - Includes 7 rolls of film - Like new condition Iodpfx Aox Dnftsf Sotr See pictures

Condition: excellent (used), Vötsch Type: VTS 7060-5 Halogen Bulb 24V, 50W Vötsch temperature test chamber with color touch panel and S!MPAT Temperature range: -70°C to +180°C, water-cooled Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature change rate cooling: 6 K/min Temperature change rate heating: 6 K/min Test chamber dimensions: Width: 800 mm, Depth: 800 mm, Height: 950 mm External dimensions: Width: 1000 mm, Depth: 1750 mm, Height: 2005 mm Viewing window: Isdpfxsxw Uqpj Af Sotr Width: 300 mm x Height: 540 mm Test chamber volume: 600 liters Sound level at 1m distance (free-field measurement): < 69 dB(A) Left side port: 50 mm diameter Right side port: 2 x 125 mm diameter Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 16 kW, Rated current: 30 A Circuit breaker, customer-provided: 29 A slow-blow Chamber is water-cooled Refrigerants: R-404A and R 23 Weight approx. 675 kg For your safety as the buyer, please note the following information! The following points are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legal, compliant refrigerants 3. After successful inspection, the chambers are subjected to a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: excellent (used), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-cooled Two-chamber design Hot Chamber: The temperature range of the hot chamber extends from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: The cold chamber temperature range is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Hot chamber temperature range: +50°C to +220°C Cold chamber temperature range: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +10% 50 Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Isdpfswxc I Usx Af Sjtr Weight: 1,000 kg Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and correction!) For further questions, please feel free to contact us by phone.