Used measuring systems for sale (266)

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER including case Laedpfx Afsx I N Imo Ssk We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 0509, input voltage: 230 V, For sale is an analogue presetting device Zoller Bravo 2. The item is in good condition. Presetting device Zoller Bravo 2 Serial number 0509 Year of manufacture 1999 Voltage 230 V∼ L/N/PE Frequency 50/60 Hz Tolerance (voltage) −10% to +6% Pneumatics (compressed air) 4−6 bar Power Lodsxwlpcspfx Af Seak

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Lajdpfxevvxvdo Af Sek Consists of 1 measuring case 20-50mm Consists of 1 measuring case 50-100mm

Condition: excellent (used), Hommel Hommel Tester T1000 Surface Roughness Measuring Instrument – Jenoptik – incl. probe & case Item Description: For sale is a Hommel Tester T1000 by Jenoptik / Hommel-Etamic. The T1000 is a precise portable surface roughness tester that uses a tactile stylus to measure the surface roughness of various workpieces. Lasdsx Ebuwspfx Af Ssk Measured values such as Ra, Rz, and Rmax are displayed immediately on the screen. An integrated mini-printer additionally allows for direct printout of measurement protocols. The device is suitable for use both in production environments and in laboratories. Technical data: Model: Hommel Tester T1000 Manufacturer: Jenoptik / Hommel-Etamic Measured parameters: Ra, Rz, Rmax, etc. Measuring range: Ra approx. 0.03 – 20 µm Display: LCD screen with direct measurement readout Dimensions: approx. 28 × 20 × 10 cm Power supply: Power adapter 230 V AC → Device 9–12 V DC Weight: Device approx. 1.5 kg, in case approx. 3–4 kg Hommel Tester T1000 External surface roughness probe Two additional stylus probes in cases Power supply Original transport case Connection cable Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) For any further questions, please feel free to contact us by phone.

Condition: excellent (used), Sell Measuring Instrument, Carbidoor, HSAFS. Ljdpfx Aovdx U Nef Sjak

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 25320A4529, Equipment: documentation/manual, For Sale: Complete HP 5527A Laser Position Transducer System Offered for sale is a complete Hewlett-Packard HP 5527A Laser Position Transducer system, suitable for extremely precise positioning, calibration, and measurement applications in machine building, metrology, R&D, and quality control. This system is used worldwide as the industry standard for calibrating and positioning linear displacements of CNC machines, measuring benches, and precision setups. System components: - HP 5527A Laser Position Transducer - HP 5517A Laser Head - HP 5507A Electronics - HP 5507A Option 036 Servo-Axis Board - HP 10780B Receiver - Linear optics: HP 10702A Linear Interferometer, 2x HP 10703A Reflectors - HP 10790 Receiver Cable - HP 10793 Laser Head Cable - HP-IB (GPIB) interface cable - Complete HP 5507A User and Service Manual Features and Benefits: - Very high resolution and measurement accuracy - Suitable for linear position measurement, calibration, and servo-assisted applications - Proven HP laser interferometry system - Modular and expandable with additional optics - Ready for integration in measurement and calibration setups via HP-IB (GPIB) Condition: - Used Ljdpfx Afex Iud Hj Ssak - From a professional measuring machine - Fully functional: the system was carefully removed in working order - Normal signs of use Delivery: - Sold as a complete system - Including all listed components and documentation Price: - Upon request Location: - Klazienaveen, Netherlands Inspection is possible by appointment.

Condition: used, Year of construction: 2008, dimension of workpiece 2400 mm voltage 26,8 V total power requirement 26,8 kW weight of the machine ca. 0,040 t Laedex Dda Topfx Af Sjk

Condition: excellent (used), functionality: fully functional, We offer a Keyence stripe light measurement device. Series VL 350, including PC, software, and calibration disc. This allows for stand-alone operation. Strengths: • Contactless measurement: As the system is optical and does not use a mechanical touch probe, it is ideal for measuring delicate or sensitive workpieces with fragile coatings (no deformation caused by a measurement probe). > High accuracy & repeatability: Measurement accuracy of ±10 µm and repeatability of 2 µm make it suitable for a wide range of industrial quality control applications. > Flexible measuring range: Capable of measuring larger components (up to Ø 300 mm × H 200 mm) as well as small detailed parts (Ø 70 mm × H 50 mm) — with easy switching between low and high magnification. > Versatile application: The rotatable and tiltable table enables measurement of various geometries and complex workpieces. The device is suitable for: > Quality control and 3D inspection of parts in manufacturing — for example, workpieces made from plastic or metal > Measurement and reverse engineering of complex geometries where contactless measurement is advantageous > Areas where high precision and repeatability are essential — for evaluating form and positional tolerances > Digitizing components with STL output for subsequent 3D printing. Original packaging is available – courier delivery can be arranged for an additional fee. Transport and loading can be organized throughout Europe at extra cost upon request. Lodpfjx Dcg Sex Af Seak Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to get in touch, please visit our website.

Condition: ready for operation (used), 1 set (5 pieces) of micrometers, in wooden case Laodpfxsx Anp Ns Af Sek Sizes: 0 - 25, 25 - 50, 50 - 75, 75 - 100, 100 - 125, 125 - 150 mm

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. Lsdpfxjx A Ur Rs Af Soak This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Ledpfx Afjxtwxuo Sjak

Condition: used, functionality: unexamined, measuring range X-axis: 183 mm, measuring range Y-axis: 122 mm, workpiece length (max.): 183 mm, workpiece height (max.): 90 mm, workpiece width (max.): 122 mm, Used Newport Research Corporation optical measurement table. Manufacturer: Newport Research Corporation Lajdpox H N A Iefx Af Sek Dimensions: 183 cm x 122 cm x 90 cm (length x width x height)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 220 V, Equipment: documentation/manual, Microscopic 3D inspection scanner with measurement envelope of 1.6 x 1.2 x 0.8mm, height resolution 0.1 µm. The unit can take linear measurement in 3 dimensions and also measure edge radius between approximately 5µm and 100µm. It is complete with laptop loaded with the necessary software, dongle, and microscope stand. It has only been lightly used. Lasdpfx Aox Ekuijf Sek

Condition: like new (used), Year of construction: 2021, We offer for sale a Mahr Precimar ULM 520 S-E length measuring device. Year of manufacture: 2021. The device has been used very little. Condition: like new. Technical specifications: External measuring range [mm]: 0 to 520 Ledpjx Ndndofx Af Ssak Internal measuring range [mm]: 0.5 to 365 Direct measuring range [mm]: External: 0 to 520, Internal: 0.5 to 365 Length measurement deviation MPEE1 (L in mm) [µm]: with ABBE measuring element only: MPE E1 ≤ (0.09+L/2000); with the base measurement system: MPE E1 ≤ (0.6+L/1000) Repeatability [µm]: with ABBE measuring element: ≤ 0.05; with the base measurement system: ≤ 0.2 Measuring forces [N]: 0.2; 1.0 to 4.5; 11 Device length [mm]: 1080 Weight [kg]: 160 Device dimensions (L x W x H) [mm]: 1080 x 380 x 480

Condition: ready for operation (used), Dear Sir or Madam, We hereby offer you the following device for sale: Keyence XM-2000 coordinate measuring system. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld Laedpsxzn E Usfx Af Sjk ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 7 December 2025. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: excellent (used), Quality Vision OGP SmartScope FLASH CNC 300 For sale is an OGP SmartScope FLASH CNC 300, a high-quality multi-sensor coordinate measuring machine for precise 2D/3D measurement tasks. This system comes from industrial use and is ideally suited for quality assurance, production, toolmaking, and laboratory applications. Description: The FLASH CNC 300 is a CNC-controlled optical measuring system with optional laser and touch probe technology. It enables highly precise measurement of mechanical components – e.g. diameters, heights, distances, contours, and geometric elements. Thanks to its video technology, motorized zoom optics, and multi-sensor-capable architecture, it is particularly versatile in application. Technical Data: Model: SmartScope FLASH CNC 300 Manufacturer: Optical Gaging Products / Quality Vision International (USA) Measuring range (XYZ): 300 × 300 × 250 mm Max. workpiece weight: up to 30 kg System weight: approx. 160 kg Power supply: 230 V~, 50/60 Hz, 2.5 A Shipping weight (packed): approx. 340 kg Measuring Methods & Equipment: Optical video system with motorized 12:1 AccuCentric® zoom Automatic zoom calibration for highest repeatability LED illumination: - Transmitted light (profile) - Coaxial incident light - SmartRing™ LED ring light Optionally usable sensors: Lajdpfxoxz A Evs Af Sjk - Laser (TTL laser) - Touch probe / scanning probe - Microprobes / height measurement Supported software (model-dependent): Measure-X, ZONE3, etc. Fields of Application: - Quality assurance - Batch and single part inspection - Measurement of plastic, metal, and milled parts - Precision optics, mold, and tool measurement - Laboratory, production, and research Condition: used Scope of supply: (see image) (Specifications are subject to change and errors excepted!) We would be happy to answer further questions for you by phone.

Condition: excellent (used), HOMMEL WERKE LV-50E roughness measuring device. Ljdpevdybdefx Af Soak

Condition: refurbished (used), Measuring head Mahr (5313320), type "Millipilot 1332B" for Höfler gear grinding machine, reconditioned. Lasdpopl T D Uefx Af Sek External signs of use are present (light scratches, etc.), but technically the device is in perfect condition and ready for immediate use. Pickup or shipping can be organized at any time. For further questions just contact me.

Condition: good (used), Hommel roughness tester type T1000 Ledpfx Afsvdwlgj Soak

Condition: excellent (used), This makes FAG Detector III extremely useful for detecting: - unbalance and alignment errors. - rolling bearing defects. - damage to gears. Lodpsvb Id Iefx Af Seak

Condition: excellent (used), I sell the SaluTron D2 Paint Thickness Meter. Laedpfxjvbwy Es Af Sek

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Lodoxlu Taepfx Af Seak

Condition: good (used), For sale: Mitutoyo micrometer set for external measurement in the range of 200–300 mm. Precise Japanese analog micrometer with an accuracy of 0.01 mm. The set includes everything shown in the photos. - Original Mitutoyo frame with lightweight construction - Measuring head with clear scale - Set of 4 measuring rods - 3 measuring anvils - Standards and adjustment tools - Multilingual user manual Lodpfxsu S Slxs Af Soak - Sturdy wooden case with foam insert Condition: The set is in like-new condition. All components are complete and well-maintained.

Condition: excellent (used), I am selling WTW LF320 meter, operational in good condition. Lodpfovdx Nyex Af Sjak We can help arrange a cost-effective shipping company or courier for you.

Condition: good (used), Selling HKM 5000N/500KG Force Meter. Lodpevbwylsfx Af Ssak