Condition: excellent (used), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. For use in industry, research, and quality assurance. Operating Condition Display: Manual mode / Warning (Drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor pre-cooling: 11,432 h Pump circulation: 2,905 h Lsdpfxjy H Hmwo Ak Aohi Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial version Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1120 x 1875 mm Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-shipment Service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Visual condition see pictures. Note Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Model: CTS CW+40/7/7 Walk-In Climate Chamber CTS Walk-In Climate Chamber 7 m³ Lodpfsylmamjx Ak Ajhi Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate-temperature test cell, CTS CW+40/7/7, industrial design. This system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures uniform climate distribution throughout the entire test area. The walk-in construction enables testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm Overall external dimensions: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Internal chamber: Stainless steel Exterior: Coated steel panels (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle mode available Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see image) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Condition: excellent (used), Year of construction: 2020, AKE Technologies Vehicle Shaker System Manufacturer: AKE Technologies GmbH Type: Vehicle Shaker System Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled test conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Stroke and positioning system: Approx. 1,000 kg load capacity per stroke table, according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Vibration Research VibrationVIEW AKE Drive File Manager Activated functions: 8 input channels Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Random Multichannel Dual Loop Control Equipment Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance investigations Noise analyses Lhodpfx Akezazm Re Aji Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. Scope of delivery AKE Shaker System for Vehicles Control and operating system Industrial control cabinet Operator computer Installed test software High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement, control and connecting cables Documentation and software media Tools and accessories as shown in the pictures Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Important note: All information is provided to the best of our knowledge, based on available documentation, software displays and nameplates. Deviations in technical data are possible. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Test Unit Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion test unit / salt spray chamber for salt spray, condensation, and combined tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watts: 2800 W K Watts: 2150 W B Watts: 500 W W Watts: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption for humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling for bottom trough system: approx. 15 liters Test procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Ledpfszba N Tex Ak Ashi Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used unit from industrial application. Optical condition as shown in the pictures. Inspection possible by appointment. Scope of delivery: (See picture) Shipping or freight forwarding possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, total operating hours: 4748.2 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Ljdoy Dd Nqopfx Ak Ashi Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, the following work is carried out on our chambers prior to sale: 1. Functional inspection and replacement of any necessary components 2. New filling with legally compliant refrigerant when required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories For sale is a high-quality Mitutoyo QS250Z CNC vision measuring machine from 2017, in excellently maintained condition. This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and much more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: - 2D coordinate measurement - Contour and profile measurement - Distance, radius, angle, and diameter determination - Measurement of bores, grooves, edges, and complex geometries - Serial measurements with automated measurement programs - Documentation and report generation via Mitutoyo software Measurement is non-contact via a high-resolution camera system with image processing. Ideal for sensitive or small parts where tactile measurement is unsuitable. Thanks to CNC control, automated measurement procedures are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): 150–200 kg Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) - Mitutoyo QS250Z main unit - Joystick box - Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP - MiCAT Vision / Form - Manuals & documentation - Various electronic boards (see pictures) - Further accessories as shown (Technical data and information subject to change and error!) For further questions, please feel free to contact us by phone. Lhodpfx Akeynkbaj Aoi

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing Lhsdpfx Ajy Hkd Hok Aji - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber designed for professional heat and cold testing in industrial settings, research, development, and quality assurance. The temperature test chambers from Binder’s MK series are particularly suited for cyclic temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature testing within a range from -40 °C to +180 °C, providing an efficient alternative to custom-built solutions. Technical specifications: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x access ports Ø 70 mm 1 door 2 standard shelves / up to a maximum of 6 shelves possible Electrical data: Rated voltage: 400 V Line frequency: 50 Hz Rated power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Weight: Approx. 320 kg Lodoy Nicmjpfx Ak Ashi Condition: Used Scope of delivery: As shown in images Viewing by appointment possible. Loading can be arranged. Sale without warranty. (Specifications and technical details subject to change and error.)

Condition: good (used), KÖHLER Corrosion Test System HK-400 Manufacturer: KÖHLER Type: presumed HK-400 Control System: ADWEST KÖHLER PC102 Marking: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test system suitable for salt spray, condensation, and corrosion tests in industry, research, development, and quality assurance. The unit is designed for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Ledpfx Aey N R Taok Aohi Visually, the system corresponds to a KÖHLER HK-400 model for salt spray and condensation testing. Technical specifications: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: ambient +10 °C to approx. +55 °C Voltage: 220 V / 50 Hz Equipment/features: ADWEST KÖHLER PC102 control system Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids / shelves Integrated pressure gauges Connections for test media supply Industrial-grade construction Possible test procedures: Salt spray testing Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial test applications Condition: Used equipment with signs of age and use. Visual condition as shown in the pictures. Important note: The original manufacturer's nameplate was not present on the unit. The technical data was compiled based on existing markings, pictures, and comparable KÖHLER HK-400 manufacturer information. Scope of delivery: System as shown All included items according to the pictures. Other notes: Inspection by appointment is possible. Loading can be arranged. Commercial sale – Sale without warranty. (Specifications subject to change and errors excepted.)

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5 water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber manufactured by Weiss Technik. This chamber is utilized for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation breakdown: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Lhjdpfx Aoy El Ttsk Asi Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers beforehand: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data; specifications may vary!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Ledpsy Dclwofx Ak Aohi Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and data are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Condition: excellent (used), Weiss Model: WK 5/55-120 Weiss Technik Climate Test Chamber WK 5/55-120 -55°C to +120°C / 5 m³ | Year of manufacture: 2016 The system is water-cooled, high-performance, and designed for continuous professional operation. For sale is a professional climate test chamber from Weiss Technik, model WK 5/55-120, manufactured in 2016. This unit is ideal for temperature, climate, and material testing in industrial, research, and development applications. With a temperature range from -55°C to +120°C and a humidity range from 10–95% RH, the chamber covers a broad range of testing scenarios. The spacious test chamber of approximately 5 m³ allows for testing of larger components or assemblies. Technical highlights: - Temperature range: -55°C to +120°C - Climatic range: 10–95% RH - Heating/cooling rate approx. 1.5 K/min - Requires water cooling Technical data: Manufacturer: Weiss Technik GmbH Model: WK 5/55-120 Year of manufacture: 2016 Dimensions / Volume - Test space volume: approx. 5 m³ - External dimensions (W×D×H): approx. 1900 × 4410 × 2621 mm - Internal dimensions (W×D×H): approx. 1600 × 1700 × 2000 mm Temperature range: -55 °C to +120 °C - Heating/cooling rate: approx. 1.5 K/min - Climatic range: 10 – 95 % RH - Dew point range: +4 °C to +85 °C Lhodjziztujpfx Ak Aoi Electrical data: - Mains connection: 3/N/PE AC 400V ±10% 50Hz - Rated power: approx. 47 kW (depending on configuration) - Rated current: 71 A - Customer-side fuse: 63 A Cooling water: - Water cooling required - Maximum cooling water consumption: approx. 7 m³/h - Inlet temperature: approx. 20 °C Noise level: approx. 76 dB(A) Weight: approx. 4,600 kg Scope of delivery: - Weiss Technik climate test chamber WK 5/55-120 - Control system - Operating manual (German) - Nameplate & documentation Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data! All information provided without liability.)

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Lhedpozizr Refx Ak Aei Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Ljdpfx Aezizrkok Aohi Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A Lhedpfx Aoziznfok Asi - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW Lodpszizmzjfx Ak Aohi - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) Lhjdpfx Aszizmuok Aei For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C Lodjzizmnspfx Ak Aohi - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Lhodpfx Akozizmbe Aei Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: used, Espec Type: TSD-100 Lodpfezizl Rex Ak Aehi 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Ljdpfx Ajzizl Dek Ajhi Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Lhedpozizlqefx Ak Aji Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS-Simulatoren, water-cooled Climate chamber 110m³ incl. condenser The KKM 110/45 type belongs to the TKM/KKM modular design of RS-Simulatoren, meaning it is a climate chamber with a modular structure that is assembled on-site. This design offers: Modularity: Individual segments are pre-assembled and installed at the customer's location. This makes retrofitting (more depth or additional modules) as well as later relocation straightforward. Technical data climate chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Ledozizldopfx Ak Aohi Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 (W x D x H in mm) incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 (W x D x H in mm) Chamber door (double-leaf) 3600 x 2930 (W x H in mm) Personnel door (single-leaf) on side wall 1880 x 900 (H x W in mm) Feedthroughs: 8 x Ø120mm (4x left & 4x right) Windows: 1x (460 x 550mm) in the front chamber door, heated 1x (1260 x 1000mm) in the left side wall, heated Temperature range: -40°C to +120°C Time deviation: ± 0.8K – 1.5K according to DIN 50011 in an empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52kg 2x R23 17kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Max. surface load 500kg / m² Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerants 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation chamber System Structure: The unit consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load, per DIN 50011 / EN 60068) or test specimen in the temperature range of -30°C...+85°C Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% RH, measured in supply air Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C Lhedpfx Ajzizk Hsk Aei - Humidity: 15...approx. 80% RH (without thermal test chamber load; with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (WxDxH): approx. 2260 x 4648 x 2260 mm - External dimensions (WxDxH): approx. 2660 x 6460 x 2800 mm - Clear door passage test chamber door (WxH): 2260 x 2260 mm - Climate module KB 127 (WxDxH): 1700 x 800 x 1400 mm - Control cabinet (WxDxH): 800 x 500 x 2000 mm Design: - Airflow: Supply air via perforated plate at the rear wall, ceiling area; exhaust air via perforated plate at the rear wall, floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating via electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior lining: Stainless steel - Exterior cladding: Galvanized, plastic-coated steel sheet - Floor: Stainless steel, floor load 15,000 N/m² - Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, externally coated with viewing window (WxH): 1000 x 1000 mm - Test area lighting: 4 spotlights, 500 W each - Insulation: Dual-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc): EDB 40 Color scheme: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10%, 3/PE N, 50Hz - Rated power: 95 kW - Rated current: 150 A

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C Lodpezizhfjfx Ak Ajhi 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.