Condition: excellent (used), For sale: Professional, portable vibration calibrator from the renowned manufacturer PCB Piezotronics. Model: 394C06 Serial number: LW19236 Made in: USA The calibrator is designed for rapid verification and calibration of accelerometers in industrial, laboratory, and automotive (NVH) applications. — Technical and visual condition The device is in very good condition and well-maintained. Manufacturer's seal is intact (VOID IF SEAL DAMAGED). Normal, minimal signs of use. Ffodoyc Igvopfx Af Deu The equipment comes from a professional measurement environment. — Features and characteristics • Portable vibration calibrator • RMS / PEAK mode • CAL adjustment (+ / -) • Stable reference signal for sensor verification • Battery powered – ideal for field work • High repeatability and measurement accuracy — Applications • Accelerometer calibration • NVH systems (Noise, Vibration, Harshness) • Industry, automotive, laboratories • Maintenance, quality control — Included in the set • PCB Piezotronics 394C06 calibrator • Original transport case • Protective cover • Adapters / mounting accessories (as shown in the photos)

Condition: excellent (used), Netzsch Type: DSC 200 F3 Maia® Measuring Device NETZSCH DSC 200 F3 Maia® with Intracooler 40 Differential Scanning Calorimeter incl. accessories Description / Scope of Functions A DSC is used for the thermal analysis of materials. It measures the heat flow that occurs in a sample during physical or chemical processes when it is heated or cooled in a controlled manner. The device enables the investigation of the following material properties, among others: - Melting and solidification temperatures - Glass transition temperatures (Tg) - Crystallization - Phase transitions - Reaction enthalpy - Heat capacity - Purity determination of substances Typical fields of application: - Materials research & development - Plastic and polymer analysis - Metal and alloy analysis - Chemistry, pharmaceuticals, ceramics - Quality assurance & laboratory analytics The Intracooler 40 enables active cooling below room temperature without the need for liquid nitrogen and significantly extends the temperature range. Scope of delivery (as pictured): - NETZSCH DSC 200 F3 Maia® measuring device - NETZSCH Intracooler 40 - Original measuring and handling tools - Calibration and reference materials (indium, tin, bismuth, zinc, aluminum, silver – approx. 400 mg each) - Several original packs of DSC crucibles (aluminum, 25 µl) - Original transport and storage boxes - Comprehensive NETZSCH original documentation (user manuals, instrument manuals, software manuals) - NETZSCH Proteus® software incl. data carrier and USB dongle Technical data (excerpt) DSC 200 F3 Maia® Power supply: 230 V / 50 Hz Power consumption: approx. 500–800 W Temperature range (with Intracooler 40): approx. -40 °C to +600 °C (depending on configuration) Measuring principle: Differential Scanning Calorimetry (DSC) Intracooler 40 Power supply: 230 V / 50 Hz Current consumption: 2 A Fjdpfx Ajyaatpof Defu Refrigerant: R507 Protection class: IP21 Max operating pressure: 24 bar Dimensions & weight (approx.): DSC 200 F3 Maia®: Dimensions (W × D × H): approx. 60 × 45 × 25 cm; Weight: approx. 35–40 kg Intracooler 40: Dimensions (W × D × H): approx. 30 × 40 × 50 cm; Weight: approx. 30 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we would be happy to answer them by phone.

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables • Original carrying case • Manufacturer’s documentation (manuals) Ffjdpfx Afeyc Idbj Dju Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments

Condition: excellent (used), Professional ATEQ F620 leak and pressure tester, designed for quality control and production testing. The device enables precise pressure-based (air) leak testing, ideal for applications in automation, pneumatics, automotive, and serial production. Very good technical condition – the device powers up correctly and is ready for use. Current calibration/service: 16.04.2024 (ATEQ) – visible on seals and labels. Features and equipment: • clear LCD display • automatic ZERO function • test programs Fsdpfeyc H T Ijx Af Djfu • communication ports (RS232 / MODBUS / PROFIBUS – depending on configuration) • analog and digital outputs • integrated pneumatic system with filter • robust industrial housing • 230 V power supply Laboratory and production-grade equipment – this is not workshop or amateur equipment.

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing Ffjdeyc H R Tjpfx Af Deu • CE marking • Device inspected (TBM inspection stickers)

Condition: excellent (used), For sale: Professional digital microscope KEYENCE VHX-7000 – fully complete, in excellent working order, ready-to-use system for quality control, laboratory research, and production applications. ⸻ Configuration / Included • Main unit VHX-7000 Fodpfx Ajyc H Rgof Dsfu • Original KEYENCE VHX monitor • Motorized XY stage + motorized Z axis • KEYENCE VHX-S770E objective lens • Control panel (manual controller) • 2× original KEYENCE carrying cases – Lens Case • Cables, accessories, mounting components • Manufacturer's documentation ⸻ Condition and Calibration • Technical condition: very good • KEYENCE calibration certificate – 12/2023 (Acceptable) • Industrial equipment, Made in Japan • No modifications, complete nameplates ⸻ Applications • Quality control (QC) • R&D laboratories • Surface analysis, defectoscopy • Measurement and image documentation in production ⸻ Why choose this unit • Full configuration (monitor + XY + Z + lens) • Recent calibration • Original cases and accessories

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Ffedpfxeyc H N Nj Af Deu Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: excellent (used), We offer a professional KEYENCE VL series 3D optical measurement system, designed for fast and precise scanning of technical components. This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial applications. Fedeyc H Npspfx Af Djfu The set includes: – VL-550 scanning head – VL-500 base unit – VL-570 control unit – Original KEYENCE calibration plate – Original transport cases – Complete documentation, manuals, and media Condition: very good, well-maintained equipment Note: Set is sold without monitor / PC unit (possibility to equip according to your own preferences) Manufactured: Made in Japan

Condition: good (used), Year of construction: 2019, 3D coordinate measuring machine STIEFELMAYER Futura CNC, no. 20190101F, year of manufacture 2019, measuring range 1,600 x 1,000 x 1,000 mm, equipped with various measuring probes, control PC, 2 output monitors, EPSON multifunction device, office workstation, next inspection due 01/2027 Ffedpfx Ajyhql Ssf Deu

Condition: used, Description: Fedpsygr E Rsfx Af Djfu CTS climate test chamber CW-60/6 -60°C to +120°C 6,000 liters (6 m³) Temperature range: -60 °C to +120 °C Temperature deviation: ±0.5 to 1 K over time Heating: 1 K/min from -40 °C to +80 °C Cooling: 1 K/min from +80 °C to -40 °C Temperature range: +10 °C to +95 °C Humidity range: 10% to 85% relative humidity In dew point range: +5°C to +89°C Temperature deviation: ±0.5 K over time Humidity deviation: ±1 to ±3% r.h. over time Dimensions: Internal dimensions: Volume: approx. 6,000 liters (6 m³) Approx. internal dimensions: Height: 2,000 mm, Width: 2,000 mm, Depth: 1,500 mm

Condition: good (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Purchase your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. Fsdpfxjyhmg Ss Af Djfu With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General Machine Data: Machine type: Crysta C Apex S9108 Year of manufacture: 2015 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 2000 Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 We are happy to provide expert advice to help you find the right machine for your measurement requirements. Worldwide delivery available on request!

Condition: like new (used), functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 150 mm, measuring range Z-axis: 100 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: MM400/L Manufacturer: Nikon Measuring range: 200 x 150 x 100 mm Ffjdpfx Afeyhl Hws Deu Accessories Measuring table: 8x6B Lens: single magnification, optionally available with 3x or 5x magnification Additional accessories Optional: MX 200 measurement computer We are happy to offer you tailored advice as specialists to find the right machine for your measuring requirements. Worldwide delivery available on request!

Condition: used, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80°C – 400 V – 5 kW For sale is an industrial drying oven / heat drying cabinet from the manufacturer Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80°C Temperature control: digital Safety thermostat included CE marking Fedpfsx Uz Rtox Af Dsfu Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Binder Model MKF 115 E3.1 Binder Climatic Test Chamber Model MKF 115 E3.1 Temperature range: -40 °C to +180 °C Humidity range: 10 % RH to 98 % RH Integrated 20 L water reservoir 4 potential-free relay contacts APT.line™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with LED chamber illumination Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ Basic Edition Fault diagnosis system with visual and audible alarms Intuitive touchscreen controller with time-segment and real-time programming Ffsdpfxjx Ux Ivs Af Dsu Internal data logger, measurement data exportable in open format via USB 50 mm access port with silicone stopper, left side Class 2 temperature safety limiter (DIN 12880) with visual alarm 4 casters (2 with locking brakes) Computer interface: Ethernet 230 V outlet on right side control panel Adjustable ramp function Integrated strip chart recorder Real-time clock Door heating Alarm notification on low water level in the fresh water tank 2 stainless steel shelves Hose burst protection, incl. water supply and drain up to 1m height Interior chamber made of stainless steel Cooling by compression refrigeration unit TECHNICAL DATA: Cabinet dimensions: Width 1000 mm Height 1725 mm incl. feet/castors Depth 865 mm incl. lugs &/connections Interior dimensions: Width 600 mm Height 480 mm Depth 400 mm Volume: Chamber volume 115 liters Net device weight (empty) 280 kg Max. total load 60 kg Max. load per shelf 30 kg Performance data Temperature: Temperature range -40...180°C Temporal temperature deviation 0.1...0.6 ± K Spatial temperature deviation 0.1...1.3 ± K Average heat-up rate according to IEC 60068-3-5: 5.5 K/min Average cool-down rate according to IEC 60068-3-5: 4.5 K/min Max. heat compensation 2500 W Climate performance data: Temperature range 10...95°C Humidity range 10...98 % RH Temporal temperature deviation depending on setpoint 0.1...1.3 ± K Max. heat compensation 400 W Electrical data: Rated voltage 400V 3N~ ±10% 50Hz Rated power 4.5 kW 7.5 A Energy consumption at 25°C / 60% RH 1.25 kW Fittings: Number of shelves 4/4 (std./max.) Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) If you have further questions, we would be happy to answer them by phone.

Condition: used, working area 50 - 75 mm working area 75 - 100 mm working area 200 - 300 mm +++++ Please note: Fjdpfxjx U A Rbj Af Defu The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, measurement range 300 - 400 mm dimension of workpiece 300 - 400 mm condition gut +++++ Ffodpex U A Imefx Af Dou Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1983, condition: used, weight 100 kg 2 Stück Ffodpjw Sygyefx Af Deu height 700 mm

Year of construction: 1985, condition: repair required (used), functionality: limited functionality, Schenk-Trebel Materials Testing Machine Type RME 250 kN • Load frame and drive by Schenk Trebel, year of construction 1985, total height approx. 3.3 m; traverse stroke approx. 2 m • Modernization around the end of 2003: equipped with the ZwickRoell "testControl" control electronics Fsdpeyhb Rlsfx Af Defu • Retrofit in 2010: MultiXtens universal extensometer system by ZwickRoell, with swiveling device and two pairs of measuring sensors (photo), and new testControl module • Note: The testControl module functions together with the current "testXpert III" software from ZwickRoell (software is not included in this offer) • Temperature chamber (photo) insertable into the test space of the machine, built in 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C; coolable down to approx. –40°C with liquid nitrogen • Load cells: 250 kN and 50 kN (currently installed, see machine photo); additionally: 5 kN, 1 kN, and 500 N (photo) • 2 wedge specimen grips (photo) Condition of the machine The machine was in use for testing until early 2026. The 50 kN load cell and the traverse displacement sensor were used (both sensors last calibrated on 06.05.2024 incl. standard inspection). A defect in the servo amplifier for the drive (component in the testControl module) has resulted, since autumn 2025, in frequent connection losses to the software and halt of the drive until hardware/software reboot. The servo amplifier or the entire testControl module need to be replaced (cost details available from the supplier). The 250 kN load cell was last calibrated on 11.02.2021, but has not been used since then. The other load cells, MultiXtens system, and temperature chamber have not been used or calibrated in recent years. The two hydraulic clamping units shown installed in the machine on the pictures will be removed and remain with the supplier.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Ffodpfxjx Up Igs Af Deu Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Binder Model: FP 115 Binder Drying Oven with Forced Air Circulation Description: For sale is a high-quality BINDER FP 115 drying oven / heating cabinet from a laboratory inventory. Ideally suited for laboratory, industrial, workshop, research, or educational use. The control is digital, and the temperature remains stable throughout operation. Ffedpfx Aex Uph Hof Dou The interior is made of metal and equipped with multiple pull-out shelves. Maximum load: 11 – 50 kg Technical Data (as per nameplate): Max. temperature: 300 °C (572 °F) Rated power: 1.60 kW Connection: 230 V / 1~ Current consumption: 7.0 A Frequency: 50/60 Hz Protection class: IP20 Temperature safety: DIN 12880, Class 2.0 Internal volume: approx. 115 liters Internal width (incubators...): 600 mm Internal depth (incubators...): 410 mm Internal height (incubators...): 480 mm External width (incubators...): 835 mm External depth (incubators...): 645 mm External height (incubators...): 705 mm Important note: "The table shown in the photos is not included in the sale." Item weight: 62 kg Condition: used Scope of delivery: (See photo) (Specifications and details subject to change and error!) If you have further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Purchase your coordinate measuring machine from the leading specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly checked, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex 7106 Year of manufacture: 2004 Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Accessories: Probe head mount: PH10MQ Probe: Renishaw TP 200 Renishaw Ffodpsyg Nl Uefx Af Dou Additional accessories: Ceramic calibration sphere, Windows 11 PC, MCOSMOS 4.0, calibration sphere We are happy to provide tailored advice as specialists to help you find the right machine for your measurement tasks. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Buy your coordinate measuring machine from the leading CMM specialist with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Apex S776 Year of manufacture: 2011 Manufacturer: Mitutoyo Measuring range: 700 x 700 x 600 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw TP 200 Renishaw Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 Ffjdpfoyg Nlhjx Af Dju As specialists, we are happy to provide individual consultation to help you find the right machine for your measuring tasks. Worldwide shipping available on request!

Condition: good (used), functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,000 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Crysta Euro C 121210 Year of manufacture: Manufacturer: Mitutoyo Measuring range: 1200 x 1200 x 1000 mm Accessories: Probe head mount: PH10T Probe head: Renishaw TP 200, SF module Additional accessories: Fodoyg Nkqjpfx Af Djfu Ceramic calibration sphere, original PC, SCR-200, temperature sensor As specialists, we are happy to provide tailored advice to help you find the right machine for your measurement tasks. Worldwide delivery available on request!

Condition: good (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected and tested from A to Z, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Global perf. 5.7.5 (X3) Year of manufacture: 2011 Manufacturer: Hexagon Measuring range: 500 x 700 x 500 mm Accessories: Probe head mount: HP-S-X3 Probe head: +2 change plates Additional accessories: Ffedpfxeyg I T Ds Af Dsu Calibration sphere ceramic, Windows 11 PC, 23" monitor, MCOSMOS 4.0, Controller B3C-LC We are happy to advise you individually as specialists, to help find the right machine for your measuring application. Worldwide delivery available upon request!

Condition: good (used), Year of construction: 2011, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been inspected, tested, and guaranteed to be ready for use from A to Z – quality you can rely on. General Machine Data: Machine type: Global perf. 5.7.5 (PH10) Year of manufacture: 2011 Manufacturer: Hexagon Measuring range: 500 x 700 x 500 mm Accessories: Probe head mount: PH10M probe head Probe: TP200 Renishaw Fsdpfoyg I Sgjx Af Dofu Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0, B3C-LC controller We are happy to offer you tailored advice as a specialist to help you find the right machine for your measurement tasks. Worldwide shipping available on request!