Used Other measuring & testing equipment for sale (142)

Condition: good (used), The Instron 4411 is a dual-column tensile testing machine capable of withstanding forces up to 5 kN. It utilizes a user-friendly controller that facilitates test setup. Load range: 5000 N (1120 lb) Load resolution: < 0.005 % of the load cell used (max.) Bdv8Nuwx Crosshead speed range: 0.5 - 500 mm/min (0.5 - 500 mm/min) Speed accuracy: < 0.2 %. Distance between tension spindle and columns: 125 mm Maximum spindle displacement: 1080 mm (without grips) Extension resolution: < 0.02 mm Power supply voltage: 230 V or 110 V (switchable)

Condition: excellent (used), Perkin Elmer Type: Optima 7300 V Spectrometer Perkin Elmer ICP-OES Optima 7300V with cooler and S10 autosampler The optical system of the Optima 7300 V enables simultaneous measurement and coverage of the entire wavelength range (UV and visible). More than 73 elements can be measured in seconds to achieve exceptional sample throughput, and all raw spectral data is stored with full reprocessing capabilities. This allows sample results to be evaluated under different processing conditions, reducing the need for re-sampling and saving time and money. The Optima 7300 V was specifically developed for the special challenges of oil sample analysis and the analysis of special metals in laboratories and offers the following features: Classic vertical burner configuration with radial view Problem-free sample feed system Proven high-performance optical system Robust solid-state generator Two models available: oil version for oil analysis and HF version for geochemical and high-solid analysis Technical data: Ultraviolet wavelength range from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm Measurement of the spectral background possible during the analyte line Solid state 40 MHz signal generator Dimensions 150 x 76 x 89 cm (W x H x D) Power supply 200-240 V, 20 A line, single-phase, 50/60 Hz Maximum power 2800 VA Connection current 15 A Circulation cooler PolyScience Recirculator N0772025 Mains connection 200-240 V 50Hz Weight: 200 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) B3U7Rqpzmq We will be happy to answer any further questions you may have over the phone.

Condition: like new (used), Milwaukee inspection camera M12 ICAV3 with battery and charging station Drezv7

Condition: as good as new (ex-display), x-travel , mm Ironing measuring screw, measurement range: 225-250 mm Machine dealer with own stock of 1600 m². Drdl7R

Year of construction: 2020, Condition: like new (used), With autom. feed + discharge Workpieces are fed in as bulk material, inspected, bad parts are sorted out and good parts are transferred to containers as bulk material. Hsma07903 Workpiece: Bolt, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - high-resolution matrix camera (21 Mp), dimensions - line scan camera (4K), surface inspection parts bunker SKAKO, 71 l volume up to 125 kg storage New price: € 230.000,-.

Year of construction: 2009, Condition: good (used), Computer tomograph Manufacturer: Wenzel Type: exaCT M150 HE Year of manufacture: 2009 General overhaul 2017 Operating hours: 200 New tube New detector Areas of application: Measurement and testing technology for small to medium-sized components. The exaCT M is particularly suitable for non-destructive testing (NDT) of plastics, light metals, composite materials and multi-materials. 280125ä Cstukaf9Od

Condition: used, In this offer you are purchasing a used dual-cutting laser "Spectra Pricision GL422N" Object of sale: 1 x Spectra Pricision GL422N with the following equipment: incl. transport case incl. hand-held and excavator receiver HL750 incl. RC402N radio remote control A total of 3 lasers are in stock. Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Uagrqwj0 The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: excellent (used), G.i.N. Type: GL5350 GL5350-8H-1R3L B7O7G7Yjps G.i.N. Intelligent data logger GL5350 Performance meets intelligence Future generations of vehicles will be increasingly equipped with intelligent driver assistance systems, complex multimedia components and and systems for autonomous driving. These complex, networked technologies provide ever larger amounts of data, which makes and more complex during the development phase. In order to shorten the test drives, reduce their number and still meet the test requirements of all departments, the advantages of an intelligent and powerful data logger data logger such as the GL5300 series come into play. The GL5300 series covers the time-synchronous recording of LIN/ CAN & CAN FD bus systems via FlexRay networks through to Ether- networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 for a further 20 CAN FD channels with SIC transceiver and up to 3 GL5450 for synchronous recording of up to 60 100-base T1 (30 taps) and up to 18 1000-base T1 routes (9 taps). Residual bus simulation Classifier Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FLexray, XCP on Ethernet Transmission of any freely configurable messages Selective recording (extensive triger and filter conditions) Data transmission via LAN/WLAN, USB and mobile radio Operation via menu control Technical data: GL5300 Configuration GL5350-8H-1R3L CAN interfaces CAN 2.0 16 CAN FD 4 LIN interfaces 5 RS-232 interfaces 7 Analog inputs 10 Bit 4 Operating voltage +7 V ... +50 V Power consumption at 12 V: typ. 10.3 W Current consumption at 12 V: in sleep mode < 2 mA in half-sleep mode typ. 180 mA in operation typ. 860 mA Operating temperature range -40 °C... +70 °C Housing: Material side profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Trim strip: ABS Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2013, Condition: like new (used), weight of the machine ca. 30 kg x-axis 300 mm y-axis 300 mm z-axis 150 mm Renishaw Equator 300 - 3 axes XY 300 mm Z 150 mm Fixing plate 350 x 305 The cost of scrap can often be reduced with the right process control. Whether as an automatic in-line process controller or as a stand-alone process controller, the speed of the Equator tester means customers can now perform a 100% inspection of workpieces instead of a spot check, significantly improving process capability. Dpmm8B The process monitoring function provides machine operators with visual bar charts and graphs of measurement data in real time to correct processes before rejects are produced.

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, Functionality: fully functional, machine/vehicle number: CC5741150004, year of last overhaul: 2025, warranty duration: 12 months, The PROFITEST PRIME AC makes your investment decision easy. Because with the accessories perfectly tailored to your requirements, electrical systems according to DIN VDE 0100-600, machines and systems according to VDE 0113-1, low-voltage switchgear assemblies according to VDE 0660-600-1, PV systems according to VDE 0126-23 and e-charging stations according to VDE 0122-1 can be tested in accordance with the standards. Drflf7 This device has been used twice. It has been calibrated up to date (see attached photo) and checked by the manufacturer.

Condition: excellent (used), Year of construction: 2019, Roundness testing machine Fab. Mitutoyo type Roundtest RA 2200 AH Cjxvnizgyy Year 2019 Technical data Make Mitutoyo Type Roundtest RA 2200 AH Year of construction 2019 Control Roundpak Measuring diameter 300 mm Measuring depth 85 mm Measuring range Z 500 mm Rotation deviation 0.02 + 3.5H / 10000 μm 18°C - 2 IKZ + 20 °C +/- 2 °K Rotation speed 2, 4, 6, 10 rpm Max. Workpiece weight 30 kg Dimensions: L 1000 x W 1200 x H 550 mm Weight: 200 kg Equipment - Centering chuck - measuring arm - monitor - Dell computer - Machine documents All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2002, Condition: good (used), MIK21 K-7256 Programmable video signal generator HDCP, HDMI -250MHz Analog Video Pixel rate -DVI-I 165MHz digital output Xujbmrvbh -NTSC, PAL, SECAM Composite and S-Video output SCART -D-TV(TV) Signal output Capability : Y, Pb, Pr output -Audio R, L output -Built-in 100 Timing formats -Large custom memory : 300 Timing, 200 Pattern, -200 Function group, 100 Scan group -2048X2048 graphic display size -All timing parameters are fully programmable -Power saving mode test capability -Easy and variable pattern edit function -RS-232C interface for PC Edit (WIN98, WIN2000) : -Pattern, Timing, Scan, Function, System Program Download -ESD protection circuit -PIP : Analog & TV Signal output at the same time

Year of construction: 2020, Condition: excellent (used), Measuring range 1000 mm measuring system resolution capability 0,01 /0,0005 mm repeatability 10 um adjustment speed 1,5 m/sec weight - pallet system ca. 1,8 kg Br2Rlzfm8Qk Digital workshop caliper in lightweight construction with wooden box. Large digital display. With measuring tips and prism guide. Easy, precise running thanks to prism guidance. Aluminum rail and slider. 50% weight advantage. The caliper was hardly used and is in new condition.

Condition: good (used), EA automatic electrical system Type: EA-EL 9400-150 T/19" 6HE / 0...7200W EA Elektro-Automatik electronic load Highlights & details: 7200 W 400 V/DC 150 A Overtemperature protection (OT) Pulse operation with adjustable pulse/pause ratio Adjustable rise/fall time Operating modes: constant current (CC), fixed voltage (CV), constant power (CP), constant resistance (CR) Remote sensor input, trigger input Battery test mode with time and capacity counter Brk2Cseeeho Description: Dynamic testing at last! No more testing batteries and power supply units via resistance loads. With the electronic load you can now test dynamically. Constant U, I, P, R, sawtooth, trapezoidal and square-wave signals, adjustable edges and pulse-pause ratios, extremely fast control values (50 µs 10 - 90 %), battery test mode, analog and optional digital interface plug-in cards (RS232/CAN/LAN/USB) make this load the ideal test device in the laboratory, test field and burn-in applications. Electronic load 0...400V / 0...150A EA-EL 9400-150 T/19" 6HE / 0...7200W Technical details: Product type : DC Electronic loads Housing : 19''-rack Voltage (U) : 400.00 Current (I) : 150.00 Power (P) : 720 Equipment : Rack version Condition : gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Heraeus 2Rudwa Heating cabinet Drying cabinet up to 250°C Inside: depth 30 cm width: 40 cm height 35 cm

Condition: used, Leakage tester/ventilation duct leakage tester Make Airflow UK Yycsrtvza Type LM 1 Serial number 125674 4 meter hose 230 Volt Documents available

Condition: as good as new (ex-display), Manufacturer: MAXX Langer Bühler Year of manufacture: 2022 Model: BU4011 Device number: BU4011.00.11111 Serial number: 45823 Internal dimensions below: 510 x 450 x 700 Dn73Dr External dimensions: 600 x 650 x 1,480 mm Media temperature: 0 to +40° C Ambient temperature: - 20 to 40° C Condition: as good as new, obviously unused Weight: 100 kg

Year of construction: 2002, Condition: good (used), Master MSPG925SM video signal generator + master msrc 004 remote control Maphz Analog was a main item in display device industries at the past time, but from now on, the digital is getting developed with multi-function and large-sized resolution. Preparing for this change, this signal generator is an essential equipment of CRT, LCD, PDP, D-TV display device industries, which was made for generating analog signal, digital signal, and TV signal, D-TV signal, HDCP Code simultaneously and sufficiently examining a large-sized display device. Delivery includes remote control MSRC-004

Condition: defective spare-parts repository (used), Oxford Instruments Rfxye3E Here we offer you an X-ray fluorescence analysis. Can analyse thickness and/or composition of coatings Up to 15 elements simultaneously Dimensions: W 1450 mm x D 1450 mm x H 900 mm Weight: approx. 185 kg Type: X-Strata 960 Condition: Only to be used as spare part dispenser Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Year of construction: 2016, Condition: excellent (used), Horiba Here we offer a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 cylinder trolley approx 1200 x 1064 x 802 mm and OVN-724A Ozk7T Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Evaluation of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operating processes Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of manufacture 2016 Type: Mexa 7100D Condition: used / used Pick up from location Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Cseagxa2Ma Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vision Engineering Specifications of the microscope from Vision Engineering: Eyepiece-less Three-dimensional viewing x3.5 - x120 stereo zoom magnification Features: Optical type: Application laboratory, inspection, for research purposes, forensic medicine, for dental laboratory, for welding work Observation technology 3D Configuration Desktop device Options and accessories USB camera, zoom Magnification Min: 3 unit Max: 240 unit Description: Lynx EVO is designed to increase productivity and efficiency through superior ergonomics. Regardless of the challenge - inspection, rework or refurbishment high resolution and high contrast 3D stereo images, you will work more comfortably and and more concentrated. Magnifications from 2.7x to 240x make it ideal for a wide range of applications. Greater efficiency: Lynx EVO offers improved hand-eye coordination, more working space for tools and better peripheral vision for easy interaction with the wider working environment and transforms the way you work. With no eyepieces to adjust, you can easily share between multiple users, to get maximum return on your investment. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Oioujqj

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0,75 kW Gzkvrc Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Automatic calculation and display of temperature value and basic rheological data RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Dq9V2D Stroke mm.: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Vel. max: 10 mm/sec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Perkin Elmer Type: Optima 7300 DV + S10 spectrometer B8V00Uydpi The Optima 7300 DV represents the ultimate ICP-OES instrument in terms of optimizing performance and productivity. Can determine more than 73 elements in seconds Technical data: Wavelength range ultraviolet from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm Measurement of the spectral background possible during the analyte line Solid state 40 MHz signal generator Duel View (DV) allows axial or radial viewing of the plasma The PerkinElmer S10 autosampler is a computerized multi-purpose sampling system for AA, ICP-OES and ICP-MS. The autosampler automates the introduction of standards and samples for instrument calibration and sample analysis and extends the functions of the spectrometer to those of a fully automated analytical workstation. Furthermore, a PolyScience WhisperCool cooling unit is also included Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.